Browse
this table...

XMMSSC - XMM-Newton Serendipitous Source Catalog (4XMM-DR13 Version)

HEASARC
Archive

Overview

The XMMSSC table contains the Fourth XMM-Newton Serendipitous Source Catalog, Thirteenth Data Release, or 4XMM-DR13. 4XMM-DR13 is the fourth-generation catalog of serendipitous X-ray sources from the European Space Agency's (ESA) XMM-Newton observatory, and has been created by the XMM-Newton Survey Science Centre (SSC) on behalf of ESA. It is an incremental version of the the 4XMM catalog and contains 531 more observations and 44,678 more detections than the preceding 4XMM-DR12 catalog, which was made public in July 2022. In addition, the team provides spectra and lightcurves for more than 16,762 more detections than in 4XMM-DR12.

The catalog contains source detections drawn from a total of 13,243 XMM-Newton EPIC observations made between 2000 February 1 and 2022 December 31; all datasets included were publicly available by 2022 December 31 but not all public observations are included in this catalog. For net exposure time >= 1ksec, the net area of the catalog fields taking account of the substantial overlaps between observations is ~1,328 deg2.

4XMM-DR13 contains 983,948 X-ray detections above the processing likelihood threshold of 6. These X-ray detections relate to 656,997 unique X-ray sources. A significant fraction of sources (129,133, 20%) have more than one detection in the catalog (up to 90 repeat observations in the most extreme case).

The catalog distinguishes between extended emission and point-like detections. Parameters of detections of extended sources are only reliable up to the maximum extent measure of 80 arcseconds. There are 91,763 detections of extended emission, of which 20,971 are 'clean' (in the sense that they were not flagged).

Due to intrinsic features of the instrumentation as well as some shortcomings of the source detection process, some detections are considered to be spurious or their parameters are considered to be unreliable. It is recommended to use a detection flag and an observation flag as filters to obtain what can be considered a 'clean' sample. There are 854,095 out of 983,948 detections that are considered to be clean (i.e., summary flag < 3).

For 353,538 detections, EPIC time series and 353,821 detections, EPIC spectra were automatically extracted during processing, and a chi2-variability test was applied to the time series. 8,029 detections in the catalog are considered variable, within the timespan of the specific observation, at a probability of 10-5 or less based on the null-hypothesis that the source is constant. Of these, 6,039 have a summary flag <3.

The median flux (in the total photon-energy band 0.2 - 12 keV) of the catalog detections is ~ 2.2 x 10-14 erg/cm2/s; in the soft energy band (0.2 - 2 keV) the median flux is ~ 5.2 x 10-15, and in the hard band (2 - 12 keV) it is ~1.2 x 10-14. About 23% have fluxes below 1 x 10-14 erg/cm2/s. The flux values from the three EPIC cameras are, overall, in agreement to ~10% for most energy bands. The median positional accuracy of the catalog point source detections is generally < 1.57 arcseconds (with a standard deviation of 1.43 arcseconds).

With 4XMM-DR13, the team also released 4XMM-DR13s, available from HEASARC as XMMSTACK, a new version of the stacked catalog built from 9,796 4XMM-DR13 overlapping observations. 4XMM-DR13s contains 1,688 stacks (or groups). Most of the stacks are composed of 2 observations and the largest has 372. The catalog contains 401,596 sources, of which 310,478 have several contributing observations. Stacking observations allows yet fainter sources to be detected in sky regions observed more than once, increasing the number of detections and uncovering long-term variability on repeatedly observed objects. 4XMM-DR13s reaches a depth of ~2.5 x 10-15 and ~6.8 x 10-15 erg/cm2/s in the soft (0.2-2keV) and hard (2-12 keV) X-ray band, respectively.

The energy bands used in the 4XMM-DR13 processing were the same as for the 3XMM catalog.

The following are the basic energy bands:

1       =       0.2 -   0.5 keV
2       =       0.5 -   1.0 keV
3       =       1.0 -   2.0 keV
4       =       2.0 -   4.5 keV
5       =       4.5 -  12.0 keV

while these are the broad energy bands:

6       =       0.2 -   2.0 keV                 soft band, no images made
7       =       2.0 -  12.0 keV                 hard band, no images made
8       =       0.2 -  12.0 keV                 total band
9       =       0.5 -   4.5 keV                 XID band

Catalog Bibcode

2020A&A...641A.136W

References

If you use the catalogs 4XMM-DR13 or 4XMM-DR13s for your research and publish the results, please use the acknowledgment below and cite the relevant paper as either of the following:
Webb et al. (2020), "The XMM-Newton serendipitous survey. IX. The fourth
    XMM-Newton serendipitous source catalogue", <A&A, 641, 136 (2020)>
   =2020A&A...641A.136W

Traulsen et al. (2020), "The XMM-Newton serendipitous survey. X: The
    second source catalogue from overlapping XMM-Newton observations and its
    long-term variable content", <A&A, 641, A137 (2020)>
   =2020A&A...641A.137T
The following is the preferred citation of the 3XMM-DR8 version of the catalog:
    Rosen, Webb, Watson et al. (2016), "The XMM-Newton Serendipitous Survey.
    VII. The Third XMM-Newton Serendipitous Source Catalogue", A&A, 590, A1.

Should you use this catalog for your research and publish the results, the authors request that you use the following acknowledgment:

"This research has made use of data obtained from the 4XMM XMM-Newton Serendipitous Source Catalog compiled by the 10 institutes of the XMM-Newton Survey Science Centre selected by ESA."


Provenance

This database table was last updated by the HEASARC in June 2023. It contains the 4XMM-DR13 catalog, released by ESA on 2023-06-12 and obtained from the XMM-Newton Survey Science Center Consortium (http://xmmssc.irap.omp.eu/Catalogue/4XMM-DR13/4XMM_DR13.html). It is also available as a gzipped FITS file at https://heasarc.gsfc.nasa.gov/FTP/xmm/data/catalogues/4XMM_DR13cat_v1.0.fits.gz.

The previous versions of the Serendipitous Source Catalog, 3XMM-DR5, 3XMM-DR6, 3XMM-DR7, 3XMM-DR8, 4XMM-DR9, 4XMM-DR10, 4XMM-DR11, and 4XMM-DR12 are also available in the same directory for comparison purposes as the files 3XMM_DR5cat_v1.0.fits.gz, 3XMM_DR6cat_v1.0.fits.gz, 3XMM_DR7cat_v1.0.fits.gz, 3XMM_DR8_cat_v1.0.fits.gz, 4XMM_DR9_cat_v1.0.fits.gz, 4XMM_DR10cat_v1.0.fits.gz, 4XMM_DR11cat_v1.0.fits.gz, and 4XMM_DR12cat_v1.0.fits.gz, respectively.


Description

The 4XMM-DR13 catalog is the fifteenth publicly released XMM-Newton X-ray source catalog produced by the XMM-Newton Survey Science Centre (SSC) consortium. It follows the 1XMM (released in April 2003), 2XMMp (July 2006), 2XMM (August 2007), 2XMMi (August 2008), 2XMMi-DR3 (April 2010), 3XMM-DR4 (July 2013), 3XMM-DR5 (April 2015), 3XMM-DR6 (July 2016), 3XMM-DR7 (June 2017), 3XMM-DR8 (May 2018), 4XMM-DR9 (December 2019), 4XMM-DR10 (December 2020), 4XMM-DR11 (August 2021), and 4XMM-DR12 (July 2022) catalogs. 2XMMp was a preliminary version of 2XMM. 2XMMi and 2XMMi-DR3 were incremental versions of the 2XMM catalog.

The 4XMM-DR13 catalog is about 5% larger than the 4XMM-DR12 catalog. In terms of the number of X-ray sources, combining the 4XMM-DR13 and 4XMM-DR13s catalogs gives a catalog that is similar in size to the Chandra Source Catalog but 4XMM-DR13+4XMM-DR13s contain twice as many individual sources as the Chandra catalog. 4XMM-DR13+4XMM-DR13s complement deeper Chandra and XMM-Newton small area surveys, probing a large sky area at the flux limit where the bulk of the objects that contribute to the X-ray background lie. The 4XMM-DR13 catalog provides a rich resource for generating large, well-defined samples for specific studies, utilizing the fact that X-ray selection is a highly efficient (arguably the most efficient) way of selecting certain types of object, notably active galaxies (AGN), clusters of galaxies, interacting compact binaries and active stellar coronae. The large sky area covered by the serendipitous survey, or equivalently the large size of the catalog, also means that 4XMM-DR13+4XMM-DR13s is a superb resource for exploring the variety of the X-ray source population and identifying rare source types.

The production of the 4XMM-DR13 and 4XMM-DR13s catalogs has been undertaken by the XMM-Newton SSC consortium in fulfillment of one of its major responsibilities within the XMM-Newton project. The catalog production process has been designed to fully exploit the capabilities of the XMM-Newton EPIC cameras and to ensure the integrity and quality of the resultant catalog through rigorous screening of the data.

4XMM-DR13 and 4XMM-DR13s are based on the pipeline configurations 18 and 19. This pipeline version contains many changes with respect to the pipeline used to make the previous major version of the catalog, 3XMM-DR5. Changes include source spectra and light curves created for pn Timing mode and small window data, source detection on pn small window data, energy dependent Charge Transfer Inefficiencies (CTI) and double event energy corrections applied, time and pattern dependent corrections of the spectral energy resolution of pn data, X-ray loading and rate dependent energy (PHA) and CTI corrections for EPIC pn Timing and Burst modes, binning of MOS spectra changed from 15 eV to 5 eV and filtering with XMMEA_EM, which is a bit-wise selection expression, automatically removing "bad events" such as bad rows, edge effects, spoiled frames, cosmic ray events (MIPs), diagonal events, event beyond threshold, etc, instead of XMMEA_SM (which removed all flagged events except those flagged only as CLOSE_TO_DEADPIX), background regions for EPIC spectra and light curves selected from the same EPIC chip where the source is found, observations of solar system objects processed such that X-ray images and spectra correctly refer to the moving target, pileup diagnostic numbers for EPIC sources included, and footprints for EPIC observations based on combined EPIC exposure maps provided as ds9 region files. Other changes carried out specifically for the production of 4XMM include a revised systematic position error, the modeling of the EPIC background and finer binning of EPIC lightcurves. More information on these changes can be found in Webb et al., 2020. 141 observations containing pn timing data, that were already used for 4XMM-DR11 have been reprocessed for 4XMM-DR12 and subsequent catalogs using the pipeline version 19, to take into account an update to the pn effective area. The observations concerned can be found in this list.

Users of the 4XMM catalog should be aware that the DETID and SRCID values bear no relation to those in the previous 2XMM series of catalogs. However, a cross-matching is provided in 4XMM-DR13 via the DR3DETID and DR3SRCID columns.


Catalog Properties

This section summarizes the main properties of the catalog but does not provide a detailed analysis. A comprehensive evaluation of the catalog is presented in the 4XMM catalog papers Webb et al. (2020) or Traulsen et al. (2020).

Overview: The catalog contains source detections drawn from 13,243 XMM-Newton EPIC observations made between 2000 February 3 and 2022 December 31 and which were publicly available by 2020 December 31. Net exposure times in these observations range from < 1000 up to ~130000 seconds (that is, a full orbit of the satellite). Figure 5.1 shows the distribution of fields on the sky.

The sky area of the catalog observations corrected for field overlaps with effective exposure > 1 ks ~1328 deg2.

The catalog contains 983,948 X-ray detections with total-band (0.2 - 12 keV) likelihood values >= 6. These are detections of 656,997 unique X-ray sources, that is, 129,133 X-ray sources have multiple detections in separate observations (up to 90 detections). Of the 983,948 X-ray detections, 91,763 are classified as extended with 20,971 of these being in regions considered to be 'clean' (SUM_FLAG < 1).

Data Quality: As part of extensive quality evaluation for the catalog, each field has been visually screened. Regions where there were obvious deficiencies with the automatic source detection and parametrization process were identified and all detections within those regions were flagged (cf. 2XMM UG, Sec. 3.2.6 at http://xmmssc-www.star.le.ac.uk/Catalogue/2XMM/UserGuide_xmmcat.html#CatVisScreen but importantly, note Section 3.11 at http://xmmssc-www.star.le.ac.uk/Catalogue/3XMM-DR4/UserGuide_xmmcat.html#VisScreen). Such flagged detections include clearly spurious detections (many of which are classified as extended) as well as detections where the source parameters may be unreliable. Each XMM-Newton field is also evaluated to assess the fractional area of the observation that is affected by flagged detections, as reflected by the OBS_CLASS parameter. For most uses of the catalog it is recommended to use either a detection flag (SUM_FLAG, EP_FLAG or SC_SUM_FLAG) or an observation flag (OBS_CLASS) as a filter to obtain what can be considered a 'clean' sample.

Note that no attempt is made to flag spurious detections arising from statistical fluctuations in the background. An updated analysis of the false detection rate is presented in the 4XMM catalog paper (Webb et al., 2020, A&A, 641, 136).

Sensitivity and Photometry: Figure 5.4 at http://xmmssc-www.star.le.ac.uk/Catalogue/3XMM-DR4/fig_5.4.html presents, for each of the three cameras, the distributions of flux for energy bands 1 to 5 and also for the combined (EPIC) data. These give an indication of the limiting flux available in the catalogs for each of the bands.

Astrometry: Comparing the astrometry between 3XMM-DR8 and 4XMM-DR9 shows very similar results. A more detailed analysis of these issues are presented in the 4XMM catalog paper (Webb et al., 2020, A&A, 641, 136).


User Guide for 4XMM

The extensive User Guide (UG) for the 2XMM catalog at http://xmmssc-www.star.le.ac.uk/Catalogue/2XMM/UserGuide_xmmcat.html still describes many of the details of the data processing and compilation approach applicable to the 4XMM-DR13 catalog. However, a significant number of changes to the processing have been implemented for 4XMM, and these are described in the 4XMM-DR9 User Guide at http://xmmssc.irap.omp.eu/Catalogue/4XMM-DR9/4XMM-DR9_Catalogue_User_Guide.html#Diff3XMMDR4.

Key Changes in 4XMM-DR13 with Respect to 4XMM-DR12

Data selection: XMM-Newton observations considered for inclusion in the 4XMM-DR13 catalog were those with ODFs available for processing up to 2022 December 31. After allowing for a small number of observations which failed in processing for a variety of reasons, Table 2.1 gives the list of the final 13,243 observations which are included in the 4XMM-DR13 catalog.

New naming convention for DETID and the SRCID: Starting in 3XMM-DR5, the procedure for attributing the detection identification number (DETID) and the unique source identification number (SRCID), both being unique to each detection and each unique source respectively, has been modified. Previously, identification numbers were re-computed for each catalog version leading to supplementary columns added to the catalog with the DETID and SRCID from previous releases.

The DETID is now constructed from the OBSID, which always remains the same for an observation, coupled with the source number SRC_NUM (SRC_NUM is the source number in the individual source list for a given observation; Sources are numbered in decreasing order of count rate (i.e. the brightest source has SRC_NUM = 1)) as follows:

       DETID = 1 + OBSID + SRC_NUM
where the '+' sign indicates string concatenation and where SRC_NUM is zero-padded to form a 4 digit number. The SRCID of a unique source is then determined from the first DETID attributed to that source (i.e. in the observation where the source was first detected) and replacing the first digit '1' by '2'.

Despite the new naming convention that aims at preserving SRCID numbers across catalog versions, a certain number of SRCID can disappear from one catalog version to another. This is a normal consequence of the algorithm that groups detections together into unique sources (see section 6 of Rosen et al. 2016). When new data are added and statistics are improved, the algorithm might find a better association of detections into unique sources. As an example, a total of 134 SRCIDs listed in 3XMM-DR7 are absent in 3XMM-DR8.

Systematic position error: The astrometry of the X-ray detections is improved by using the catcorr task to cross-correlate the X-ray detections with the USNO B1.0, 2MASS or SDSS (DR8) optical/IR catalogs. However, where catcorr fails to obtain a statistically reliable result (poscorrok=false), a systematic error of 1.5'' was used to create the 3XMM catalog. To check this value, the team cross-matched SDSS quasars with the detection catalog where poscorrok=false, out to r=30 arcseconds, filtering the latter with SUM_FLAG=0 and EP_EXTENT=0, to keep only the cleanest sample of secure point-like X-ray sources. For more information about what was done, see Webb et al. (2020). The team defined the combined positional error as sigma=(Delta S2 + Delta X2/2)0.5, where Delta X = POSERR and Delta S is the radially-averaged uncertainty in the SDSS positions to which systematic 0.1'' was added in quadrature, and x = r / sigma. The final filtering retained only the 157 QSO-X-ray pairs with x < 5.

The expected probability density distribution of x should follow the Rayleigh distribution P(x) = x exp(-x2). Since this was not the case for the 157 pairs of sources found above, the team added an additional positional uncertainty, sigma, in quadrature, so that the total positional uncertainty is now (sigma2 + Sigma2)0.5, looking for the value of Sigma that minimizes the difference between the distribution of the x' = r/sigma' and the Rayleigh distribution. For 4XMM-DR10 the team found Sigma = 1.90 +/- 0.01 arcsec, where the uncertainty (1 sigma) has been calculated by bootstrap with replacement. This value was then used to replace the 1.5 arcsec systematic error when poscorrok=false.

Pile up information: As of 4XMM the team provides three new columns (PN_PILEUP, M1_PILEUP and M2_PILEUP) quantifying whether each detection may be affected by pile-up in any instrument. A value below 1 corresponds to negligible pile-up (less than a few % flux loss) while values larger than 10 denote heavy pile-up. Pile-up is dependent on time for variable sources. The team neglects that here, but note that a variable source is more piled-up than a constant one for the same average count rate, so our pile-up level can be viewed as a lower limit. They also neglect the slight dependence on the source spectrum due to the event grade dependence of pile-up.

Our pile-up levels are not based on a fit of the full images using a pile-up model (Ballet 1999). For point sources, they are based on the measured count rates reported in the catalog over the full energy band, transformed into counts per frame. The thresholds (at which the pile-up level is set to 1) are set to 1.3 counts/frame for MOS and 0.15 counts/frame for PN.

Some pileup values for extended sources were deemed to be erroneous and therefore all pileup values for extended sources were NULL in the 4XMM-DR10, 4XMM-DR11 and 4XMM-DR12 versions. Starting from pipeline version 20.08 (SAS version 20.0), emldetect (v.7.7) introduces a vignetting correction to the pileup estimate of extended sources. Since the observations processed with older version of the pipeline could not benefit from this correction and in order to keep pileup values consistent across the catalog, the team applied an analytic calculation method to the older data for the pileup which closely matches the results produced by the new version of emldetect. Therefore pileup values for extended sources in 4XMM-DR13 are now accurate.

Hot areas in the detector plane: Warm pixels on a CCD (at a few counts per exposure) are too faint to be detected as such by the automatic processing, but can either push faint sources above detection level, or create spurious sources when combined with statistical fluctuations. This is an intrinsically random process, not visible over a short period of time, but which creates hot areas when projecting all sources detected over 18 years onto the detector plane.

The team addressed this by projecting all sources onto CCD coordinates PN/M1/M2_RAWX/Y, keeping only sources above the detection threshold with the current instrument alone. In that way, the team could distinguish hot areas coming from different instruments. They proceeded to detect hot pixels or columns in each CCD, using a similar method to the SAS task embadpixfind. For more information see Webb et al. (2020). Many of warm pixels were not present at the beginning of the mission, and some appear for a short amount of time. So each hot area was tested for variability using revolution number, and the same KS-based algorithm used to detect segments of bright columns, compared to the reference established over all sources on all CCDs and all instruments. This resulted in a revolution interval for each hot area.

Sources on a hot area for a particular instrument and within the corresponding revolution interval are flagged with flag 12. The updated table for the 12 flags is given below:

   1    Low detector coverage; ca_MASKFRAC < 0.5
   2    Near other source; R <= 65 * SQRT (EP_RATE); R(min) = 10", R(max) = 400"
   3    Within extended emission; R <= 3 * EP_EXTENT; R(max) = 200"
   4    Possible spurious extended source near bright source; Flag 2 is set and EP_CTS(min) = 1000 for the causing source
   5    Possible spurious extended source within extended emission; R <= 160" and fraction of rate wrt causing source is 0.4
   6    Possible spurious extended source due to unusually large single-band DET_ML; Fraction of ca_b_DET_ML wrt the sum of all >= 0.9
   7    Possible spurious extended source; At least one of the flags 4, 5, 6 is set
   8    On bright MOS-1 corner or bright low gain PN column
   9    Near bright MOS-1 corner; R<= CUTRAD = 60" of a bright pixel the corner
  10    Detection whose center lies on any masked column or row due OoT and RGA features.
  11    Within region where spurious detections occur; Manual flag
  12    Detection on hot area
The default value of every flag is F for False. When a flag was set, it means it has been changed to T for True.

The task 'dpssflag' sets all flags except the camera-specific flags (i.e., flags 2,3,4,5,6,7) on the summary row (EPIC band 8) which are then propagated backwards to the individual cameras and bands. Flag 12 is not propagated into the SUM_FLAG in 4XMM.


Credits

The production of the 4XMM-DR13 catalog is a collaborative project involving the whole XMM-Newton SSC Consortium:
  Institut de Recherche en Astrophysique et Planetologie, Toulouse, France

  University of Leicester, UK

  Mullard Space Science Laboratory, University College London, UK

  Max-Planck Institut für extraterrestrische Physik, Germany

  Leibniz-Institut für Astrophysik, Potsdam (AIP), Germany

  Département d'Astrophysique, CEA/DRF/IRFU, Saclay, France

  Observatoire Astronomique de Strasbourg, France

  Instituto de Física de Cantabria, Santander, Spain
The SSC team are grateful to the XMM-Newton SOC for their support in the catalog production activities.

The SSC acknowledges the use of the TOPCAT and STILTS software packages (written by Mark Taylor, University of Bristol) in the production and testing of the 4XMM-DR9 catalog.


Documentation

The User Guide for the 4XMM-DR13 Catalog, available at http://xmmssc.irap.omp.eu/Catalogue/4XMM-DR13/4XMM-DR13_Catalogue_User_Guide.html, contains details of the catalog production process and content. A complete description of this catalog and the parameters listed therein can be found there. The list of observations used in the catalog can be found at http://xmmssc.irap.omp.eu/Catalogue/4XMM-DR13/4xmmdr13_obslist.txt. The user should particularly refer to section 6 of the 4XMM-DR9 UG ("Known Problems and Other Issues") at http://xmmssc.irap.omp.eu/Catalogue/4XMM-DR13/4XMM-DR13_Catalogue_User_Guide.html#Problems as much of this material is not included in this HEASARC documentation.

Watchouts

(1) As in 4XMM-DR9, the catalog includes values for the pileup for both point-like and extended sources. Some pileup values for extended sources were deemed to be erroneous and therefore all pileup values for extended sources are NULL in the 4XMM-DR10, 4XMM-DR11, 4XMM-DR12, and 4XMM-DR13 versions.

(2) 141 observations containing pn timing data, that were already used for 4XMM-DR11 have been reprocessed to take into account an update to the pn effective area. The values for detections / sources in these observations in 4XMM-DR13 show slight differences to those in previous catalog versions. The observations concerned can be found in this list.


Catalog Content and Organization

There are 336 parameters in the catalog. For each observation, there are up to three cameras with one or more exposures which were merged when the filter and sub-modes were the same (2XMM UG, Sec. 2.2 at http://xmmssc-www.star.le.ac.uk/Catalogue/2XMM/UserGuide_xmmcat.html#SelExp). The data in each exposure are accumulated in several distinct energy bands (see Table 1 above). Camera-level measurements can further be combined into observation-level parameters. Consequently, the source parameters can refer to some or all of these levels: on the observation level there are the final mean parameters of the source (prefix 'EP'); on the camera level the data for each of the three cameras (where available) are given (prefix 'PN', 'M1', or 'M2'), and on the energy band level the energy-dependent details of the source parameters are given (indicated by a 'b' in the column name where b = 1, 2, 3, 4, 5, 8 or 9). Finally, on a meta-level, some parameters of sources that were detected more than once (prefix 'SC') were combined, see 2XMM UG, Sec. 3.2.4 at http://xmmssc-www.star.le.ac.uk/Catalogue/2XMM/UserGuide_xmmcat.html#CatComb.

It should be pointed out that the SAS used for the bulk reprocessing (for 4XMM) was from manifest pipeline version 18, which is based on SAS 18. A description of the column and possible cross-references follow.

Entries with NULL are given when no detection was made with the respective camera, that is, ca_MASKFRAC < 0.15 or NULL (i.e., a camera was not used in an observation).

The following table gives an overview of the statistics of this catalog in comparison with 4XMM-DR12:

                                     4XMM-DR13      4XMM-DR12       Increment

Number of observations               13243	    12712           531

Number of 'clean' observations       10895	    10543           352
 (i.e., observation class < 3)

Observing interval                   03-Feb-00      03-Feb-00       1 yr
                                    - 31-Dec-22    - 31-Dec-21

Sky coverage, taking overlaps        1328 sq.deg    1283 sq.deg     45 sq.deg
 into account (>= 1ksec exposure)

Number of detections                 983948         939270          44678

Number of 'clean' detections         854095	    821953          32142
 (i.e., summary flag < 3)
Number of unique sources             656997	    630347          26650
Number of 'cleanest' (summary        20971	    20169           802
 flag = 0, not in high-background
 fields) extended detections

Number of detections with spectra    353821	    337058          16763

Number of detections with timeseries 353538	    336776          16762
Number of detections where the       8029	    7697            332
 probability of timeseries being
 constant is < 1.0E-05

Known Problems and Other Issues

Please refer to http://xmmssc.irap.omp.eu/Catalogue/4XMM-DR13/4XMM_DR13.html#watchouts (the Watchouts section of the 4XMM-DR13 catalog page) for the latest information on 4XMM-DR13 catalog issues.

Parameters

DetID
A unique number which identifies each entry (detection) in the catalog. The DETID numbering assignments in 4XMM-DR9 bear no relation to those in 3XMM-DR4 and earlier but the DETID of the matching detection from the 3XMM-DR4 catalog to the 4XMM-DR9 detection is provided via the DR4_DETID column.

SrcID
A unique number assigned to a group of catalog entries which are assumed to be the same source. The process of grouping detections into unique sources has changed since the 2XMM catalog series and is described in Section 3.8 of the 3XMM-DR4 UG at http://xmmssc-www.star.le.ac.uk/Catalogue/3XMM-DR4/UserGuide_xmmcat.html#DiffUniqueI. The SRCID assignments in 4XMM-DR13 bear no relation to those in 3XMM-DR4 and earlier, but the nearest unique sources from the 3XMM-DR4 catalog to the 4XMM-DR13 unique source is provided via the DR4_SRCID column.

DR3_SrcID
The 2XMMi-DR3 source identifier of the nearest unique 2XMMi-DR3 source that lies within 10 arcseconds of the 4XMM-DR13 unique source position.

DR3_DetID
The 2XMMi-DR3 detection identifier of the nearest 2XMMi-DR3 detection that lies within 10 arcseconds of the detection position in 4XMM-DR13.

DR3_DetDist
The distance in arcseconds between the 4XMM-DR13 detection position and the nearest detection (within 10 arcseconds) in the 2XMMi-DR3 catalog.

DR3_SrcDist
The distance in arcseconds between the 4XMM-DR13 unique source position and the nearest unique source (within 10 arcseconds) in the 2XMMi-DR3 catalog. Null values signify no matching detections in the DR3 version of the catalog (e.g., the fields was not yet observed). Zeros signify cases where the distance with the matching detection is below 10-2 arcseconds.

DR3_Mult
The number of unique sources from the 2XMMi-DR3 catalog that lie within 10 arcseconds of the unique source position in 4XMM-DR13.

DR4_SrcID
The 3XMM-DR4 source identifier of the nearest unique 3XMM-DR4 source that lies within 10 arcseconds of the 4XMM-DR13 unique source position.

DR4_DetID
The 3XMM-DR4 detection identifier of the nearest 3XMM-DR4 detection that lies within 10 arcseconds of the detection position in 4XMM-DR13.

DR4_DetDist
The distance in arcseconds between the 4XMM-DR13 detection position and the nearest detection (within 10 arcseconds) in the 3XMM-DR4 catalog.

DR4_SrcDist
The distance in arcseconds between the 4XMM-DR13 unique source position and the nearest unique source (within 10 arcseconds) in the 3XMM-DR4 catalog.

DR4_Mult
The number of unique sources from the 3XMM-DR4 catalog that lie within 10 arcseconds of the unique source position in 4XMM-DR13.

Name
The IAU designation assigned to the unique SRCID. An IAU-style identification, NAME, has been assigned to each unique source (SRCID) based upon the IAU-registered classification, 4XMM, and the J2000.0 source coordinates. The form of the IAU names is '4XMM Jhhmmss.sSddmmss' where hhmmss.s is taken from the Right Ascension coordinate given in the RA parameter and Sddmmss is the Declination taken from the Dec parameter.

Src_Num
The decimal source number in the individual source list for this observation; when expressed in hexadecimal it identifies the SAS task srcmatch source-specific product files belonging to this detection. (See Appendix A.1 of the 2XMM UG at http://xmmssc-www.star.le.ac.uk/Catalogue/2XMM/UserGuide_xmmcat.html#AppProd for more details).

ObsID
The XMM-Newton observation identification.

XMM_Revolution
The XMM-Newton revolution number in which the observation took place.

Time
The start time of the observation (converted from the Modified Julian Date format given in the original input file).

End_Time
The end time of the observation (converted from the Modified Julian Date format given in the original input file).

Obs_Class
The quality classification of the whole observation based on the area flagged as bad in the manual flagging process as compared to the whole detection area, see 2XMM UG Section 3.2.6 at http://xmmssc-www.star.le.ac.uk/Catalogue/2XMM/UserGuide_xmmcat.html#CatVisScreen. 0 means nothing has been flagged; 1 indicates that 0% < area < 0.1% of the total detection mask has been flagged; 2 indicates that 0.1% <= area < 1% has been flagged; 3 indicates that 1% <= area < 10% has been flagged; 4 indicates that 10% <= area < 100% has been flagged; and 5 means that the whole field was flagged as bad.

PN_Filter
The type of PN filter used. The options are Thick, Medium, Thin1, Thin2, and Open, depending on the efficiency of the optical blocking.

M1_Filter
The type of M1 filter used. The options are Thick, Medium, Thin1, and Open, depending on the efficiency of the optical blocking.

M2_Filter
The type of M2 filter used. The options are Thick, Medium, Thin1, and Open, depending on the efficiency of the optical blocking.

PN_Submode
The PN observing mode. The options are full frame mode with the full FOV exposed (in two sub-modes), and large window mode with only parts of the FOV exposed, see Table 2.3 at http://xmmssc-www.star.le.ac.uk/Catalogue/3XMM-DR4/modes.html.

M1_Submode
The M1 observing mode. The options are full frame mode with the full FOV exposed, partial window mode with only parts of the central CCD exposed (in different sub-modes, see Table 2.3 at http://xmmssc-www.star.le.ac.uk/Catalogue/3XMM-DR4/modes.html), and timing mode where the central CCD was not exposed ('Fast Uncompressed').

M2_Submode
The M2 observing mode. The options are full frame mode with the full FOV exposed, partial window mode with only parts of the central CCD exposed (in different sub-modes, see Table 2.3 at http://xmmssc-www.star.le.ac.uk/Catalogue/3XMM-DR4/modes.html), and timing mode where the central CCD was not exposed ('Fast Uncompressed').

RA
The corrected Right Ascension of the detection in the selected equinox after statistical correlation of the emldetect coordinates, RA_UNC and DEC_UNC, with the USNO B1.0, 2MASS or SDSS (DR8) optical/IR source catalogs using the SAS task catcorr (the process of correcting the coordinates is also referred to as field rectification). In cases where the cross-correlation is determined to be unreliable, no correction is applied and this value is therefore the same as RA_UNC. The RA was given in J2000.0 decimal degrees in the original table.

Dec
The corrected Declination of the detection in the selected equinox after statistical correlation of the emldetect coordinates, RA_UNC and DEC_UNC, with the USNO B1.0, 2MASS or SDSS (DR8) optical/IR source catalogs using the SAS task catcorr (the process of correcting the coordinates is also referred to as field rectification). In cases where the cross-correlation is determined to be unreliable, no correction is applied and this value is therefore the same as DEC_UNC. The Declination was given in J2000 decimal degrees in the original table.

Error_Radius
The total positional uncertainty, in arcseconds, (called POSERR in the original table) calculated by combining the statistical error RADEC_ERROR (called RADEC_ERR in the original table) and the error arising from the field rectification process SYSERRCC as follows:

     POSERR = SQRT (RADEC_ERROR2 + SYSERRCC2 ).
  
For a 2-dimensional Gaussian error distribution, this radius reflects a 63% probability that the true source position lies within this radius of the measured position. The corresponding 68% confidence radius is 1.075 * RADEC_ERR.

LII
The corrected Galactic Longitude of the detection in degrees.

BII
The corrected Galactic Latitude of the detection in degrees.

RADec_Error
The statistical 1-sigma error in the detection position, in arcseconds. This is a radial error on the position, computed as sqrt(ra_err2 + dec_err2), in arcseconds, where ra_err and dec_err are the 1-sigma uncertainties in the RA and DEC coordinates respectively. The ra_err and dec_err quantities are provided, in image pixel units, in the X_IMA_ERR and Y_IMA_ERR columns, respectively, in the P__OMSRLI__.FIT pipeline product file of each observation - they are not provided directly in the catalog.

Syserrcc
The estimated error arising from the field rectification process, in arcseconds. If the SAS task catcorr results in a statistically reliable cross-correlation with the USNO B1.0, 2MASS or SDSS (DR8) optical/IR catalogs, SYSERRCC combines the 1-sigma errors on the translational shifts in the RA (rashift_error) and DEC (decshift_error) directions, together with the rotational error component, derived from the catalog that yields the 'best' solution, as follows:

     SYSERRCC = SQRT (rashift_error2 + decshift_error2 +
                       (r * thetarot_error)2)
  
where r is the radial off-axis angle of the detection from the spacecraft boresight, in arcseconds, and thetarot_error is the error on the rotational correction, in radians. Where catcorr fails to obtain a statistically reliable result, SYSERRCC is set to 1.5 arcseconds (see 3XMM-DR4 UG, Sec. 3.4 at http://xmmssc-www.star.le.ac.uk/Catalogue/3XMM-DR4/UserGuide_xmmcat.html#Astrom for details). Note that rashift_error, decshift_error and thetarot_error are not provided separately in the catalog.

Refcat
An integer code reflecting the absolute astrometric reference catalog which gave the statistically 'best' result for the field rectification process (from which the corrections are taken). It is 1 for the SDSS (DR9) catalog, 2 for 2MASS and 3 for USNO B1.0. Where catcorr fails to produce a reliable solution, REFCAT is a negative number, indicating the cause of the failure. The failure codes are

     -1 = Too few matches (< 10),
     -2 = poor fit (goodness of fit parameter in catcorr < 5.0),
     -3 = error on the field positional rectification correction is > 0.75
          arcseconds
  
See 3XMM-DR4 UG, Sec. 3.4 at http://xmmssc-www.star.le.ac.uk/Catalogue/3XMM-DR4/UserGuide_xmmcat.html#Astrom for more details.

Poscorok_Flag
This Boolean flag [T/F] parameter signifies whether catcorr obtained a statistically reliable solution or not. This parameter is redundant in the sense that if REFCAT is positive, then a reliable solution was considered to have been found (see 3XMM-DR4 UG, Sec. 3.4 at http://xmmssc-www.star.le.ac.uk/Catalogue/3XMM-DR4/UserGuide_xmmcat.html#Astrom for details).

RA_Unc
The Right Ascension of the detection in the selected equinox, as determined by the SAS task emldetect by fitting a detection simultaneously in all cameras and energy bands. This was given in J2000.0 decimal degrees in the original SSC table.

Dec_Unc
The Declination of the detection in the selected equinox, as determined by the SAS task emldetect by fitting a detection simultaneously in all cameras and energy bands. This was given in J2000.0 decimal degrees in the original SSC table.

Ccdpn
The PN CCD number in which the detection lies.

PN_RawX
The raw X pixel position of the detection in the PN image.

PN_RawY
The raw Y pixel position of the detection in the PN image.

Ccdm1
The M1 CCD number in which the detection lies.

M1_RawX
The raw X pixel position of the detection in the M1 image.

M1_RawY
The raw Y pixel position of the detection in the M1 image.

Ccdm2
The M2 CCD number in which the detection lies.

M2_RawX
The raw X pixel position of the detection in the M2 image.

M2_RawY
The raw Y pixel position of the detection in the M2 image.

EP_1_Flux
The EPIC band 1 flux (erg/cm2/s). Fluxes are calculated by the SAS tasks emldetect and by srcmatch for the various input bands. Note that they correspond to the flux in the entire PSF and do not need any further corrections for PSF losses. For the individual cameras, individual-band fluxes (bands 1 - 5, 9) are calculated from the respective band count rate using the filter- and camera-dependent energy conversion factors given in Table 8 above and corrected for the dead time due to the read-out phase. These can be 0.0 if the detection has no counts. The EPIC flux in each band is the mean of the band-specific detections in all cameras weighted by the errors.

EP_1_Flux_Error
The uncertainty in EPIC band 1 flux (erg/cm2/s). The error in the weighted mean of the EPIC flux in band b is given by:

            EP_b_FLUX_ERR = SQRT (1.0 / SUM (1 / ca_b_FLUX_ERR2 ))
  
where ca = PN, M1, M2, and b is the band (1, 2, 3, 4, 5, 8, 9). The flux errors are calculated from the respective band count rate error using the respective energy conversion factors

EP_2_Flux
The EPIC band 2 flux (erg/cm2/s). Fluxes are calculated by the SAS tasks emldetect and by srcmatch for the various input bands. Note that they correspond to the flux in the entire PSF and do not need any further corrections for PSF losses. For the individual cameras, individual-band fluxes (bands 1 - 5, 9) are calculated from the respective band count rate using the filter- and camera-dependent energy conversion factors given in Table 8 above and corrected for the dead time due to the read-out phase. These can be 0.0 if the detection has no counts. The EPIC flux in each band is the mean of the band-specific detections in all cameras weighted by the errors.

EP_2_Flux_Error
The uncertainty in EPIC band 2 flux (erg/cm2/s). The error in the weighted mean of the EPIC flux in band b is given by:

            EP_b_FLUX_ERR = SQRT (1.0 / SUM (1 / ca_b_FLUX_ERR2 ))
  
where ca = PN, M1, M2, and b is the band (1, 2, 3, 4, 5, 8, 9). The flux errors are calculated from the respective band count rate error using the respective energy conversion factors

EP_3_Flux
The EPIC band 3 flux (erg/cm2/s). Fluxes are calculated by the SAS tasks emldetect and by srcmatch for the various input bands. Note that they correspond to the flux in the entire PSF and do not need any further corrections for PSF losses. For the individual cameras, individual-band fluxes (bands 1 - 5, 9) are calculated from the respective band count rate using the filter- and camera-dependent energy conversion factors given in Table 8 above and corrected for the dead time due to the read-out phase. These can be 0.0 if the detection has no counts. The EPIC flux in each band is the mean of the band-specific detections in all cameras weighted by the errors.

EP_3_Flux_Error
The uncertainty in the EPIC band 3 flux (erg/cm2/s). The error in the weighted mean of the EPIC flux in band b is given by:

            EP_b_FLUX_ERR = SQRT (1.0 / SUM (1 / ca_b_FLUX_ERR2 ))
  
where ca = PN, M1, M2, and b is the band (1, 2, 3, 4, 5, 8, 9). The flux errors are calculated from the respective band count rate error using the respective energy conversion factors

EP_4_Flux
The EPIC band 4 flux (erg/cm2/s). Fluxes are calculated by the SAS tasks emldetect and by srcmatch for the various input bands. Note that they correspond to the flux in the entire PSF and do not need any further corrections for PSF losses. For the individual cameras, individual-band fluxes (bands 1 - 5, 9) are calculated from the respective band count rate using the filter- and camera-dependent energy conversion factors given in Table 8 above and corrected for the dead time due to the read-out phase. These can be 0.0 if the detection has no counts. The EPIC flux in each band is the mean of the band-specific detections in all cameras weighted by the errors.

EP_4_Flux_Error
The uncertainty in the EPIC band 4 flux (erg/cm2/s). The error in the weighted mean of the EPIC flux in band b is given by:

            EP_b_FLUX_ERR = SQRT (1.0 / SUM (1 / ca_b_FLUX_ERR2 ))
  
where ca = PN, M1, M2, and b is the band (1, 2, 3, 4, 5, 8, 9). The flux errors are calculated from the respective band count rate error using the respective energy conversion factors

EP_5_Flux
The EPIC band 5 flux (erg/cm2/s). Fluxes are calculated by the SAS tasks emldetect and by srcmatch for the various input bands. Note that they correspond to the flux in the entire PSF and do not need any further corrections for PSF losses. For the individual cameras, individual-band fluxes (bands 1 - 5, 9) are calculated from the respective band count rate using the filter- and camera-dependent energy conversion factors given in Table 8 above and corrected for the dead time due to the read-out phase. These can be 0.0 if the detection has no counts. The EPIC flux in each band is the mean of the band-specific detections in all cameras weighted by the errors.

EP_5_Flux_Error
The uncertainty in the EPIC band 5 flux (erg/cm2/s). The error in the weighted mean of the EPIC flux in band b is given by:

            EP_b_FLUX_ERR = SQRT (1.0 / SUM (1 / ca_b_FLUX_ERR2 ))
  
where ca = PN, M1, M2, and b is the band (1, 2, 3, 4, 5, 8, 9). The flux errors are calculated from the respective band count rate error using the respective energy conversion factors

EP_8_Flux
The EPIC combined band 8 flux (erg/cm2/s). Fluxes are calculated by the SAS tasks emldetect and by srcmatch for the various input bands. Note that they correspond to the flux in the entire PSF and do not need any further corrections for PSF losses. For the individual cameras, individual-band fluxes (bands 1 - 5, 9) are calculated from the respective band count rate using the filter- and camera-dependent energy conversion factors given in Table 8 above and corrected for the dead time due to the read-out phase. These can be 0.0 if the detection has no counts. The EPIC flux in each band is the mean of the band-specific detections in all cameras weighted by the errors. Combined band fluxes for the individual cameras are the sum of the fluxes and errors from each band (1 - 5).

EP_8_Flux_Error
The uncertainty in the EPIC combined band flux (erg/cm2/s). The error in the weighted mean of the EPIC flux in band b is given by:

            EP_b_FLUX_ERR = SQRT (1.0 / SUM (1 / ca_b_FLUX_ERR2 ))
  
where ca = PN, M1, M2, and b is the band (1, 2, 3, 4, 5, 8, 9). The flux errors are calculated from the respective band count rate error using the respective energy conversion factors

EP_9_Flux
The EPIC band 9 (XID) flux (erg/cm2/s). Fluxes are calculated by the SAS tasks emldetect and by srcmatch for the various input bands. Note that they correspond to the flux in the entire PSF and do not need any further corrections for PSF losses. For the individual cameras, individual-band fluxes (bands 1 - 5, 9) are calculated from the respective band count rate using the filter- and camera-dependent energy conversion factors given in Table 8 above and corrected for the dead time due to the read-out phase. These can be 0.0 if the detection has no counts. The EPIC flux in each band is the mean of the band-specific detections in all cameras weighted by the errors.

EP_9_Flux_Error
The uncertainty in the EPIC band 9 flux (erg/cm2/s). The error in the weighted mean of the EPIC flux in band b is given by:

            EP_b_FLUX_ERR = SQRT (1.0 / SUM (1 / ca_b_FLUX_ERR2 ))
  
where ca = PN, M1, M2, and b is the band (1, 2, 3, 4, 5, 8, 9). The flux errors are calculated from the respective band count rate error using the respective energy conversion factors

PN_1_Flux
The PN band 1 flux (erg/cm2/s). Fluxes are calculated by the SAS tasks emldetect and by srcmatch for the various input bands. Note that they correspond to the flux in the entire PSF and do not need any further corrections for PSF losses. For the individual cameras, individual-band fluxes (bands 1 - 5, 9) are calculated from the respective band count rate using the filter- and camera-dependent energy conversion factors given in Table 8 above and corrected for the dead time due to the read-out phase. These can be 0.0 if the detection has no counts

PN_1_Flux_Error
The uncertainty in the PN band 1 flux (erg/cm2/s). These errors are calculated from the respective band count rate error using the respective energy conversion factors.

PN_2_Flux
The PN band 2 flux (erg/cm2/s). Fluxes are calculated by the SAS tasks emldetect and by srcmatch for the various input bands. Note that they correspond to the flux in the entire PSF and do not need any further corrections for PSF losses. For the individual cameras, individual-band fluxes (bands 1 - 5, 9) are calculated from the respective band count rate using the filter- and camera-dependent energy conversion factors given in Table 8 above and corrected for the dead time due to the read-out phase. These can be 0.0 if the detection has no counts

PN_2_Flux_Error
The uncertainty in the PN band 2 flux (erg/cm2/s). These errors are calculated from the respective band count rate error using the respective energy conversion factors.

PN_3_Flux
The PN band 3 flux (erg/cm2/s). Fluxes are calculated by the SAS tasks emldetect and by srcmatch for the various input bands. Note that they correspond to the flux in the entire PSF and do not need any further corrections for PSF losses. For the individual cameras, individual-band fluxes (bands 1 - 5, 9) are calculated from the respective band count rate using the filter- and camera-dependent energy conversion factors given in Table 8 above and corrected for the dead time due to the read-out phase. These can be 0.0 if the detection has no counts

PN_3_Flux_Error
The uncertainty in the PN band 3 flux (erg/cm2/s). These errors are calculated from the respective band count rate error using the respective energy conversion factors.

PN_4_Flux
The PN band 4 flux (erg/cm2/s). Fluxes are calculated by the SAS tasks emldetect and by srcmatch for the various input bands. Note that they correspond to the flux in the entire PSF and do not need any further corrections for PSF losses. For the individual cameras, individual-band fluxes (bands 1 - 5, 9) are calculated from the respective band count rate using the filter- and camera-dependent energy conversion factors given in Table 8 above and corrected for the dead time due to the read-out phase. These can be 0.0 if the detection has no counts

PN_4_Flux_Error
The uncertainty in the PN band 4 flux (erg/cm2/s). These errors are calculated from the respective band count rate error using the respective energy conversion factors.

PN_5_Flux
The PN band 5 flux (erg/cm2/s). Fluxes are calculated by the SAS tasks emldetect and by srcmatch for the various input bands. Note that they correspond to the flux in the entire PSF and do not need any further corrections for PSF losses. For the individual cameras, individual-band fluxes (bands 1 - 5, 9) are calculated from the respective band count rate using the filter- and camera-dependent energy conversion factors given in Table 8 above and corrected for the dead time due to the read-out phase. These can be 0.0 if the detection has no counts

PN_5_Flux_Error
The uncertainty in the PN band 5 flux (erg/cm2/s). These errors are calculated from the respective band count rate error using the respective energy conversion factors.

PN_8_Flux
The PN combined band flux (erg/cm2/s). Fluxes are calculated by the SAS tasks emldetect and by srcmatch for the various input bands. Note that they correspond to the flux in the entire PSF and do not need any further corrections for PSF losses. Combined band fluxes (band 8) for the individual cameras are the sum of the fluxes from each band (1 - 5).

PN_8_Flux_Error
The uncertainty in the PN combined band flux (erg/cm2/s). Combined band fluxes and errors (band 8) for the individual cameras are the sum of the fluxes and errors from each band (1 - 5).

PN_9_Flux
The PN band 9 flux (erg/cm2/s). Fluxes are calculated by the SAS tasks emldetect and by srcmatch for the various input bands. Note that they correspond to the flux in the entire PSF and do not need any further corrections for PSF losses. For the individual cameras, individual-band fluxes (bands 1 - 5, 9) are calculated from the respective band count rate using the filter- and camera-dependent energy conversion factors given in Table 8 above and corrected for the dead time due to the read-out phase. These can be 0.0 if the detection has no counts

PN_9_Flux_Error
The uncertainty in the PN band 9 flux (erg/cm2/s). These errors are calculated from the respective band count rate error using the respective energy conversion factors.

M1_1_Flux
The M1 band 1 flux (erg/cm2/s). Fluxes are calculated by the SAS tasks emldetect and by srcmatch for the various input bands. Note that they correspond to the flux in the entire PSF and do not need any further corrections for PSF losses. For the individual cameras, individual-band fluxes (bands 1 - 5, 9) are calculated from the respective band count rate using the filter- and camera-dependent energy conversion factors given in Table 8 above and corrected for the dead time due to the read-out phase. These can be 0.0 if the detection has no counts

M1_1_Flux_Error
The uncertainty in the M1 band 1 flux (erg/cm2/s). These errors are calculated from the respective band count rate error using the respective energy conversion factors.

M1_2_Flux
The M1 band 2 flux (erg/cm2/s). Fluxes are calculated by the SAS tasks emldetect and by srcmatch for the various input bands. Note that they correspond to the flux in the entire PSF and do not need any further corrections for PSF losses. For the individual cameras, individual-band fluxes (bands 1 - 5, 9) are calculated from the respective band count rate using the filter- and camera-dependent energy conversion factors given in Table 8 above and corrected for the dead time due to the read-out phase. These can be 0.0 if the detection has no counts

M1_2_Flux_Error
The uncertainty in the M1 band 2 flux (erg/cm2/s). These errors are calculated from the respective band count rate error using the respective energy conversion factors.

M1_3_Flux
The M1 band 3 flux (erg/cm2/s). Fluxes are calculated by the SAS tasks emldetect and by srcmatch for the various input bands. Note that they correspond to the flux in the entire PSF and do not need any further corrections for PSF losses. For the individual cameras, individual-band fluxes (bands 1 - 5, 9) are calculated from the respective band count rate using the filter- and camera-dependent energy conversion factors given in Table 8 above and corrected for the dead time due to the read-out phase. These can be 0.0 if the detection has no counts

M1_3_Flux_Error
The uncertainty in the M1 band 3 flux (erg/cm2/s). These errors are calculated from the respective band count rate error using the respective energy conversion factors.

M1_4_Flux
The M1 band 4 flux (erg/cm2/s). Fluxes are calculated by the SAS tasks emldetect and by srcmatch for the various input bands. Note that they correspond to the flux in the entire PSF and do not need any further corrections for PSF losses. For the individual cameras, individual-band fluxes (bands 1 - 5, 9) are calculated from the respective band count rate using the filter- and camera-dependent energy conversion factors given in Table 8 above and corrected for the dead time due to the read-out phase. These can be 0.0 if the detection has no counts

M1_4_Flux_Error
The uncertainty in the M1 band 4 flux (erg/cm2/s). These errors are calculated from the respective band count rate error using the respective energy conversion factors.

M1_5_Flux
The M1 band 5 flux (erg/cm2/s). Fluxes are calculated by the SAS tasks emldetect and by srcmatch for the various input bands. Note that they correspond to the flux in the entire PSF and do not need any further corrections for PSF losses. For the individual cameras, individual-band fluxes (bands 1 - 5, 9) are calculated from the respective band count rate using the filter- and camera-dependent energy conversion factors given in Table 8 above and corrected for the dead time due to the read-out phase. These can be 0.0 if the detection has no counts

M1_5_Flux_Error
The uncertainty in the M1 band 5 flux (erg/cm2/s). These errors are calculated from the respective band count rate error using the respective energy conversion factors.

M1_8_Flux
The M1 combined band flux (erg/cm2/s). Fluxes are calculated by the SAS tasks emldetect and by srcmatch for the various input bands. Note that they correspond to the flux in the entire PSF and do not need any further corrections for PSF losses. Combined band fluxes and errors (band 8) for the individual cameras are the sum of the fluxes and errors from each band (1 - 5).

M1_8_Flux_Error
The uncertainty in the M1 combined band flux (erg/cm2/s). Combined band fluxes and errors (band 8) for the individual cameras are the sum of the fluxes and errors from each band (1 - 5).

M1_9_Flux
The M1 band 9 flux (erg/cm2/s). Fluxes are calculated by the SAS tasks emldetect and by srcmatch for the various input bands. Note that they correspond to the flux in the entire PSF and do not need any further corrections for PSF losses. For the individual cameras, individual-band fluxes (bands 1 - 5, 9) are calculated from the respective band count rate using the filter- and camera-dependent energy conversion factors given in Table 8 above and corrected for the dead time due to the read-out phase. These can be 0.0 if the detection has no counts

M1_9_Flux_Error
The uncertainty in the M1 band 9 flux (erg/cm2/s). These errors are calculated from the respective band count rate error using the respective energy conversion factors.

M2_1_Flux
The M2 band 1 flux (erg/cm2/s). Fluxes are calculated by the SAS tasks emldetect and by srcmatch for the various input bands. Note that they correspond to the flux in the entire PSF and do not need any further corrections for PSF losses. For the individual cameras, individual-band fluxes (bands 1 - 5, 9) are calculated from the respective band count rate using the filter- and camera-dependent energy conversion factors given in Table 8 above and corrected for the dead time due to the read-out phase. These can be 0.0 if the detection has no counts

M2_1_Flux_Error
The uncertainty in the M2 band 1 flux (erg/cm2/s). These errors are calculated from the respective band count rate error using the respective energy conversion factors.

M2_2_Flux
The M2 band 2 flux (erg/cm2/s). Fluxes are calculated by the SAS tasks emldetect and by srcmatch for the various input bands. Note that they correspond to the flux in the entire PSF and do not need any further corrections for PSF losses. For the individual cameras, individual-band fluxes (bands 1 - 5, 9) are calculated from the respective band count rate using the filter- and camera-dependent energy conversion factors given in Table 8 above and corrected for the dead time due to the read-out phase. These can be 0.0 if the detection has no counts

M2_2_Flux_Error
The uncertainty in the M2 band 2 flux (erg/cm2/s). These errors are calculated from the respective band count rate error using the respective energy conversion factors.

M2_3_Flux
The M2 band 3 flux (erg/cm2/s). Fluxes are calculated by the SAS tasks emldetect and by srcmatch for the various input bands. Note that they correspond to the flux in the entire PSF and do not need any further corrections for PSF losses. For the individual cameras, individual-band fluxes (bands 1 - 5, 9) are calculated from the respective band count rate using the filter- and camera-dependent energy conversion factors given in Table 8 above and corrected for the dead time due to the read-out phase. These can be 0.0 if the detection has no counts

M2_3_Flux_Error
The uncertainty in the M2 band 3 flux (erg/cm2/s). These errors are calculated from the respective band count rate error using the respective energy conversion factors.

M2_4_Flux
The M2 band 4 flux (erg/cm2/s). Fluxes are calculated by the SAS tasks emldetect and by srcmatch for the various input bands. Note that they correspond to the flux in the entire PSF and do not need any further corrections for PSF losses. For the individual cameras, individual-band fluxes (bands 1 - 5, 9) are calculated from the respective band count rate using the filter- and camera-dependent energy conversion factors given in Table 8 above and corrected for the dead time due to the read-out phase. These can be 0.0 if the detection has no counts

M2_4_Flux_Error
The uncertainty in the M2 band 4 flux (erg/cm2/s). These errors are calculated from the respective band count rate error using the respective energy conversion factors.

M2_5_Flux
The M2 band 5 flux (erg/cm2/s). Fluxes are calculated by the SAS tasks emldetect and by srcmatch for the various input bands. Note that they correspond to the flux in the entire PSF and do not need any further corrections for PSF losses. For the individual cameras, individual-band fluxes (bands 1 - 5, 9) are calculated from the respective band count rate using the filter- and camera-dependent energy conversion factors given in Table 8 above and corrected for the dead time due to the read-out phase. These can be 0.0 if the detection has no counts

M2_5_Flux_Error
The uncertainty in the M2 band 5 flux (erg/cm2/s). These errors are calculated from the respective band count rate error using the respective energy conversion factors.

M2_8_Flux
The M2 combined band flux (erg/cm2/s). Fluxes are calculated by the SAS tasks emldetect and by srcmatch for the various input bands. Note that they correspond to the flux in the entire PSF and do not need any further corrections for PSF losses. Combined band fluxes and errors (band 8) for the individual cameras are the sum of the fluxes and errors from each band (1 - 5).

M2_8_Flux_Error
The uncertainty in the M2 combined band flux (erg/cm2/s). Combined band fluxes and errors (band 8) for the individual cameras are the sum of the fluxes and errors from each band (1 - 5).

M2_9_Flux
The M2 band 9 flux (erg/cm2/s). Fluxes are calculated by the SAS tasks emldetect and by srcmatch for the various input bands. Note that they correspond to the flux in the entire PSF and do not need any further corrections for PSF losses. For the individual cameras, individual-band fluxes (bands 1 - 5, 9) are calculated from the respective band count rate using the filter- and camera-dependent energy conversion factors given in Table 8 above and corrected for the dead time due to the read-out phase. These can be 0.0 if the detection has no counts

M2_9_Flux_Error
The uncertainty in the M2 band 9 flux (erg/cm2/s). These errors are calculated from the respective band count rate error using the respective energy conversion factors.

EP_8_Rate
The EPIC combined band count rate (ct/s), as derived by the SAS task emldetect. The individual-band count rate (bands 1 - 5, 9) is the band-dependent source counts (ca_b_CTS) divided by the exposure map, which combines the mirror vignetting, detector efficiency, bad pixels and CCD gaps, and an OOT-factor (Out Of Time), depending on the PN modes (PN_SUBMODE). The source counts and with it the count rates were implicitly background subtracted during the fitting process. They correspond to the count rate in the entire PSF and do not need any further corrections for PSF losses. Note that rates can be 0.0 (but not negative) if the source is too faint in the respective band to be detectable. The combined band count rate (band 8) for each camera is calculated as the sum of the count rates in the individual bands 1 - 5. The EPIC rates are the sum of the camera-specific count rates in the respective band.

EP_8_Rate_Error
The uncertainty in the EPIC combined band 8 count rate (ct/s).

EP_9_Rate
The EPIC band 9 count rate (ct/s), as derived by the SAS task emldetect. The individual-band count rate (bands 1 - 5, 9) is the band-dependent source counts (ca_b_CTS) divided by the exposure map, which combines the mirror vignetting, detector efficiency, bad pixels and CCD gaps, and an OOT-factor (Out Of Time), depending on the PN modes (PN_SUBMODE). The source counts and with it the count rates were implicitly background subtracted during the fitting process. They correspond to the count rate in the entire PSF and do not need any further corrections for PSF losses. Note that rates can be 0.0 (but not negative) if the source is too faint in the respective band to be detectable. The EPIC rates are the sum of the camera-specific count rates in the respective band.

EP_9_Rate_Error
The uncertainty in the EPIC band 9 count rate (ct/s).

PN_1_Rate
The PN band 1 count rate (ct/s), as derived by the SAS task emldetect. The individual-band count rate (bands 1 - 5, 9) is the band-dependent source counts (ca_b_CTS) divided by the exposure map, which combines the mirror vignetting, detector efficiency, bad pixels and CCD gaps, and an OOT-factor (Out Of Time), depending on the PN modes (PN_SUBMODE). The source counts and with it the count rates were implicitly background subtracted during the fitting process. They correspond to the count rate in the entire PSF and do not need any further corrections for PSF losses. Note that rates can be 0.0 (but not negative) if the source is too faint in the respective band to be detectable.

PN_1_Rate_Error
The uncertainty in the PN band 1 count rate (ct/s).

PN_2_Rate
The PN band 2 count rate (ct/s), as derived by the SAS task emldetect. The individual-band count rate (bands 1 - 5, 9) is the band-dependent source counts (ca_b_CTS) divided by the exposure map, which combines the mirror vignetting, detector efficiency, bad pixels and CCD gaps, and an OOT-factor (Out Of Time), depending on the PN modes (PN_SUBMODE). The source counts and with it the count rates were implicitly background subtracted during the fitting process. They correspond to the count rate in the entire PSF and do not need any further corrections for PSF losses. Note that rates can be 0.0 (but not negative) if the source is too faint in the respective band to be detectable.

PN_2_Rate_Error
The uncertainty in the PN band 2 count rate (ct/s).

PN_3_Rate
The PN band 3 count rate (ct/s), as derived by the SAS task emldetect. The individual-band count rate (bands 1 - 5, 9) is the band-dependent source counts (ca_b_CTS) divided by the exposure map, which combines the mirror vignetting, detector efficiency, bad pixels and CCD gaps, and an OOT-factor (Out Of Time), depending on the PN modes (PN_SUBMODE). The source counts and with it the count rates were implicitly background subtracted during the fitting process. They correspond to the count rate in the entire PSF and do not need any further corrections for PSF losses. Note that rates can be 0.0 (but not negative) if the source is too faint in the respective band to be detectable.

PN_3_Rate_Error
The uncertainty in the PN band 3 count rate (ct/s).

PN_4_Rate
The PN band 4 count rate (ct/s), as derived by the SAS task emldetect. The individual-band count rate (bands 1 - 5, 9) is the band-dependent source counts (ca_b_CTS) divided by the exposure map, which combines the mirror vignetting, detector efficiency, bad pixels and CCD gaps, and an OOT-factor (Out Of Time), depending on the PN modes (PN_SUBMODE). The source counts and with it the count rates were implicitly background subtracted during the fitting process. They correspond to the count rate in the entire PSF and do not need any further corrections for PSF losses. Note that rates can be 0.0 (but not negative) if the source is too faint in the respective band to be detectable.

PN_4_Rate_Error
The uncertainty in the PN band 4 count rate (ct/s).

PN_5_Rate
The PN band 5 count rate (ct/s), as derived by the SAS task emldetect. The individual-band count rate (bands 1 - 5, 9) is the band-dependent source counts (ca_b_CTS) divided by the exposure map, which combines the mirror vignetting, detector efficiency, bad pixels and CCD gaps, and an OOT-factor (Out Of Time), depending on the PN modes (PN_SUBMODE). The source counts and with it the count rates were implicitly background subtracted during the fitting process. They correspond to the count rate in the entire PSF and do not need any further corrections for PSF losses. Note that rates can be 0.0 (but not negative) if the source is too faint in the respective band to be detectable.

PN_5_Rate_Error
The uncertainty in the PN band 5 count rate (ct/s).

PN_8_Rate
The PN combined band 8 count rate (ct/s), as derived by the SAS task emldetect. The individual-band count rate (bands 1 - 5, 9) is the band-dependent source counts (ca_b_CTS) divided by the exposure map, which combines the mirror vignetting, detector efficiency, bad pixels and CCD gaps, and an OOT-factor (Out Of Time), depending on the PN modes (PN_SUBMODE). The source counts and with it the count rates were implicitly background subtracted during the fitting process. They correspond to the count rate in the entire PSF and do not need any further corrections for PSF losses. Note that rates can be 0.0 (but not negative) if the source is too faint in the respective band to be detectable.

PN_8_Rate_Error
The uncertainty in the PN combined band 8 count rate (ct/s).

PN_9_Rate
The PN band 9 count rate (ct/s), as derived by the SAS task emldetect. The individual-band count rate (bands 1 - 5, 9) is the band-dependent source counts (ca_b_CTS) divided by the exposure map, which combines the mirror vignetting, detector efficiency, bad pixels and CCD gaps, and an OOT-factor (Out Of Time), depending on the PN modes (PN_SUBMODE). The source counts and with it the count rates were implicitly background subtracted during the fitting process. They correspond to the count rate in the entire PSF and do not need any further corrections for PSF losses. Note that rates can be 0.0 (but not negative) if the source is too faint in the respective band to be detectable.

PN_9_Rate_Error
The uncertainty in the PN band 9 count rate (ct/s).

M1_1_Rate
The M1 band 1 count rate (ct/s), as derived by the SAS task emldetect. The individual-band count rate (bands 1 - 5, 9) is the band-dependent source counts (ca_b_CTS) divided by the exposure map, which combines the mirror vignetting, detector efficiency, bad pixels and CCD gaps, and an OOT-factor (Out Of Time), depending on the PN modes (PN_SUBMODE). The source counts and with it the count rates were implicitly background subtracted during the fitting process. They correspond to the count rate in the entire PSF and do not need any further corrections for PSF losses. Note that rates can be 0.0 (but not negative) if the source is too faint in the respective band to be detectable.

M1_1_Rate_Error
The uncertainty in the M1 band 1 count rate (ct/s).

M1_2_Rate
The M1 band 2 count rate (ct/s), as derived by the SAS task emldetect. The individual-band count rate (bands 1 - 5, 9) is the band-dependent source counts (ca_b_CTS) divided by the exposure map, which combines the mirror vignetting, detector efficiency, bad pixels and CCD gaps, and an OOT-factor (Out Of Time), depending on the PN modes (PN_SUBMODE). The source counts and with it the count rates were implicitly background subtracted during the fitting process. They correspond to the count rate in the entire PSF and do not need any further corrections for PSF losses. Note that rates can be 0.0 (but not negative) if the source is too faint in the respective band to be detectable.

M1_2_Rate_Error
The uncertainty in the M1 band 2 count rate (ct/s).

M1_3_Rate
The M1 band 3 count rate (ct/s), as derived by the SAS task emldetect. The individual-band count rate (bands 1 - 5, 9) is the band-dependent source counts (ca_b_CTS) divided by the exposure map, which combines the mirror vignetting, detector efficiency, bad pixels and CCD gaps, and an OOT-factor (Out Of Time), depending on the PN modes (PN_SUBMODE). The source counts and with it the count rates were implicitly background subtracted during the fitting process. They correspond to the count rate in the entire PSF and do not need any further corrections for PSF losses. Note that rates can be 0.0 (but not negative) if the source is too faint in the respective band to be detectable.

M1_3_Rate_Error
The uncertainty in the M1 band 3 count rate (ct/s).

M1_4_Rate
The M1 band 4 count rate (ct/s), as derived by the SAS task emldetect. The individual-band count rate (bands 1 - 5, 9) is the band-dependent source counts (ca_b_CTS) divided by the exposure map, which combines the mirror vignetting, detector efficiency, bad pixels and CCD gaps, and an OOT-factor (Out Of Time), depending on the PN modes (PN_SUBMODE). The source counts and with it the count rates were implicitly background subtracted during the fitting process. They correspond to the count rate in the entire PSF and do not need any further corrections for PSF losses. Note that rates can be 0.0 (but not negative) if the source is too faint in the respective band to be detectable.

M1_4_Rate_Error
The uncertainty in the M1 band 4 count rate (ct/s).

M1_5_Rate
The M1 band 5 count rate (ct/s), as derived by the SAS task emldetect. The individual-band count rate (bands 1 - 5, 9) is the band-dependent source counts (ca_b_CTS) divided by the exposure map, which combines the mirror vignetting, detector efficiency, bad pixels and CCD gaps, and an OOT-factor (Out Of Time), depending on the PN modes (PN_SUBMODE). The source counts and with it the count rates were implicitly background subtracted during the fitting process. They correspond to the count rate in the entire PSF and do not need any further corrections for PSF losses. Note that rates can be 0.0 (but not negative) if the source is too faint in the respective band to be detectable.

M1_5_Rate_Error
The uncertainty in the M1 band 5 count rate (ct/s).

M1_8_Rate
The M1 combined band 8 count rate (ct/s), as derived by the SAS task emldetect. The individual-band count rate (bands 1 - 5, 9) is the band-dependent source counts (ca_b_CTS) divided by the exposure map, which combines the mirror vignetting, detector efficiency, bad pixels and CCD gaps, and an OOT-factor (Out Of Time), depending on the PN modes (PN_SUBMODE). The source counts and with it the count rates were implicitly background subtracted during the fitting process. They correspond to the count rate in the entire PSF and do not need any further corrections for PSF losses. Note that rates can be 0.0 (but not negative) if the source is too faint in the respective band to be detectable.

M1_8_Rate_Error
The uncertainty in the M1 combined band count rate (ct/s).

M1_9_Rate
The M1 band 1 count rate (ct/s), as derived by the SAS task emldetect. The individual-band count rate (bands 1 - 5, 9) is the band-dependent source counts (ca_b_CTS) divided by the exposure map, which combines the mirror vignetting, detector efficiency, bad pixels and CCD gaps, and an OOT-factor (Out Of Time), depending on the PN modes (PN_SUBMODE). The source counts and with it the count rates were implicitly background subtracted during the fitting process. They correspond to the count rate in the entire PSF and do not need any further corrections for PSF losses. Note that rates can be 0.0 (but not negative) if the source is too faint in the respective band to be detectable.

M1_9_Rate_Error
The uncertainty in the M1 band 9 count rate (ct/s).

M2_1_Rate
The M2 band 1 count rate (ct/s), as derived by the SAS task emldetect. The individual-band count rate (bands 1 - 5, 9) is the band-dependent source counts (ca_b_CTS) divided by the exposure map, which combines the mirror vignetting, detector efficiency, bad pixels and CCD gaps, and an OOT-factor (Out Of Time), depending on the PN modes (PN_SUBMODE). The source counts and with it the count rates were implicitly background subtracted during the fitting process. They correspond to the count rate in the entire PSF and do not need any further corrections for PSF losses. Note that rates can be 0.0 (but not negative) if the source is too faint in the respective band to be detectable.

M2_1_Rate_Error
The uncertainty in the M2 band 1 count rate (ct/s).

M2_2_Rate
The M2 band 2 count rate (ct/s), as derived by the SAS task emldetect. The individual-band count rate (bands 1 - 5, 9) is the band-dependent source counts (ca_b_CTS) divided by the exposure map, which combines the mirror vignetting, detector efficiency, bad pixels and CCD gaps, and an OOT-factor (Out Of Time), depending on the PN modes (PN_SUBMODE). The source counts and with it the count rates were implicitly background subtracted during the fitting process. They correspond to the count rate in the entire PSF and do not need any further corrections for PSF losses. Note that rates can be 0.0 (but not negative) if the source is too faint in the respective band to be detectable.

M2_2_Rate_Error
The uncertainty in the M2 band 2 count rate (ct/s).

M2_3_Rate
The M2 band 3 count rate (ct/s), as derived by the SAS task emldetect. The individual-band count rate (bands 1 - 5, 9) is the band-dependent source counts (ca_b_CTS) divided by the exposure map, which combines the mirror vignetting, detector efficiency, bad pixels and CCD gaps, and an OOT-factor (Out Of Time), depending on the PN modes (PN_SUBMODE). The source counts and with it the count rates were implicitly background subtracted during the fitting process. They correspond to the count rate in the entire PSF and do not need any further corrections for PSF losses. Note that rates can be 0.0 (but not negative) if the source is too faint in the respective band to be detectable.

M2_3_Rate_Error
The uncertainty in the M2 band 3 count rate (ct/s).

M2_4_Rate
The M2 band 4 count rate (ct/s), as derived by the SAS task emldetect. The individual-band count rate (bands 1 - 5, 9) is the band-dependent source counts (ca_b_CTS) divided by the exposure map, which combines the mirror vignetting, detector efficiency, bad pixels and CCD gaps, and an OOT-factor (Out Of Time), depending on the PN modes (PN_SUBMODE). The source counts and with it the count rates were implicitly background subtracted during the fitting process. They correspond to the count rate in the entire PSF and do not need any further corrections for PSF losses. Note that rates can be 0.0 (but not negative) if the source is too faint in the respective band to be detectable.

M2_4_Rate_Error
The uncertainty in the M2 band 4 count rate (ct/s).

M2_5_Rate
The M2 band 5 count rate (ct/s), as derived by the SAS task emldetect. The individual-band count rate (bands 1 - 5, 9) is the band-dependent source counts (ca_b_CTS) divided by the exposure map, which combines the mirror vignetting, detector efficiency, bad pixels and CCD gaps, and an OOT-factor (Out Of Time), depending on the PN modes (PN_SUBMODE). The source counts and with it the count rates were implicitly background subtracted during the fitting process. They correspond to the count rate in the entire PSF and do not need any further corrections for PSF losses. Note that rates can be 0.0 (but not negative) if the source is too faint in the respective band to be detectable.

M2_5_Rate_Error
The uncertainty in the M2 band 5 count rate (ct/s).

M2_8_Rate
The M2 combined band 8 count rate (ct/s), as derived by the SAS task emldetect. The individual-band count rate (bands 1 - 5, 9) is the band-dependent source counts (ca_b_CTS) divided by the exposure map, which combines the mirror vignetting, detector efficiency, bad pixels and CCD gaps, and an OOT-factor (Out Of Time), depending on the PN modes (PN_SUBMODE). The source counts and with it the count rates were implicitly background subtracted during the fitting process. They correspond to the count rate in the entire PSF and do not need any further corrections for PSF losses. Note that rates can be 0.0 (but not negative) if the source is too faint in the respective band to be detectable.

M2_8_Rate_Error
The uncertainty in the M2 combined band count rate (ct/s).

M2_9_Rate
The M2 band 9 count rate (ct/s), as derived by the SAS task emldetect. The individual-band count rate (bands 1 - 5, 9) is the band-dependent source counts (ca_b_CTS) divided by the exposure map, which combines the mirror vignetting, detector efficiency, bad pixels and CCD gaps, and an OOT-factor (Out Of Time), depending on the PN modes (PN_SUBMODE). The source counts and with it the count rates were implicitly background subtracted during the fitting process. They correspond to the count rate in the entire PSF and do not need any further corrections for PSF losses. Note that rates can be 0.0 (but not negative) if the source is too faint in the respective band to be detectable.

M2_9_Rate_Error
The uncertainty in the M2 band 9 count rate (ct/s).

EP_8_Cts
The EPIC combined band 8 source counts, as derived by the SAS task emldetect. The individual-band source counts (not given in this catalog) are derived under the total PSF (point spread function) and corrected for background. The PSF is fitted on sub-images of radius 60 arcseconds in each band (CUTRAD), which means, that in most cases at least 90% of the PSF (if covered by the detector) was effectively used in the fit. Combined band source counts (band 8) for each camera are calculated as the sum of the source counts in the individual bands 1 - 5. The EPIC band 8 counts are the sum of the (available) individual camera band 8 counts.

EP_8_Cts_Error
The uncertainty in the EPIC combined band source counts, being the statistical 1-sigma error in the total source counts of the detection, as derived by the SAS task emldetect.

PN_8_Cts
The PN combined band 8 source counts, as derived by the SAS task emldetect. The individual-band source counts (not given in this catalog) are derived under the total PSF (point spread function) and corrected for background. The PSF is fitted on sub-images of radius 60 arcseconds in each band (CUTRAD), which means, that in most cases at least 90% of the PSF (if covered by the detector) was effectively used in the fit. Combined band source counts (band 8) for each camera are calculated as the sum of the source counts in the individual bands 1 - 5.

PN_8_Cts_Error
The uncertainty in the PN combined band source counts, being the statistical 1-sigma error in the total source counts of the detection, as derived by the SAS task emldetect.

M1_8_Cts
The M1 combined band 8 source counts, as derived by the SAS task emldetect. The individual-band source counts (not given in this catalog) are derived under the total PSF (point spread function) and corrected for background. The PSF is fitted on sub-images of radius 60 arcseconds in each band (CUTRAD), which means, that in most cases at least 90% of the PSF (if covered by the detector) was effectively used in the fit. Combined band source counts (band 8) for each camera are calculated as the sum of the source counts in the individual bands 1 - 5.

M1_8_Cts_Error
The uncertainty in the M1 combined band 8 source counts, being the statistical 1-sigma error in the total source counts of the detection, as derived by the SAS task emldetect.

M2_8_Cts
The M2 combined band source counts, as derived by the SAS task emldetect. The individual-band source counts (not given in this catalog) are derived under the total PSF (point spread function) and corrected for background. The PSF is fitted on sub-images of radius 60 arcseconds in each band (CUTRAD), which means, that in most cases at least 90% of the PSF (if covered by the detector) was effectively used in the fit. Combined band source counts (band 8) for each camera are calculated as the sum of the source counts in the individual bands 1 - 5.

M2_8_Cts_Error
The uncertainty in the M2 combined band 8 source counts, being the statistical 1-sigma error in the total source counts of the detection, as derived by the SAS task emldetect.

EP_8_Det_ML
The EPIC combined band detection likelihood. Maximum likelihoods are derived by the SAS task emldetect. The individual-band maximum likelihood values (bands 1 - 5, 9) stand for the detection likelihood of the source, L = - ln p, where p is the probability of the detection occurring by chance. While the detection likelihood of an extended source is computed in the same way, systematic effects such as deviations between the real background and the model, have a larger effect on extended sources and thus detection likelihoods of extended sources are more uncertain. To calculate the maximum likelihood values for the combined band 8 and EPIC the sum of the individual likelihoods is being normalized to two degrees of freedom using the function ML_corr = gammaq (ndof/2, ML), where ndof = 2 (for xpos,ypos) + N_images for point sources, ndof = 3 (for xpos,ypos,extent) + N_images for extended sources, gammaq = - ln (Q(a,x)) = - ln (1 - P(a,x)), and P is the incomplete gamma function.

EP_9_Det_ML
The EPIC band 9 detection likelihood. Maximum likelihoods are derived by the SAS task emldetect. The individual-band maximum likelihood values (bands 1 - 5, 9) stand for the detection likelihood of the source, L = - ln p, where p is the probability of the detection occurring by chance. While the detection likelihood of an extended source is computed in the same way, systematic effects such as deviations between the real background and the model, have a larger effect on extended sources and thus detection likelihoods of extended sources are more uncertain.

PN_1_Det_ML
The PN band 1 detection likelihood. Maximum likelihoods are derived by the SAS task emldetect. The individual-band maximum likelihood values (bands 1 - 5, 9) stand for the detection likelihood of the source, L = - ln p, where p is the probability of the detection occurring by chance. While the detection likelihood of an extended source is computed in the same way, systematic effects such as deviations between the real background and the model, have a larger effect on extended sources and thus detection likelihoods of extended sources are more uncertain.

PN_2_Det_ML
The PN band 2 detection likelihood. Maximum likelihoods are derived by the SAS task emldetect. The individual-band maximum likelihood values (bands 1 - 5, 9) stand for the detection likelihood of the source, L = - ln p, where p is the probability of the detection occurring by chance. While the detection likelihood of an extended source is computed in the same way, systematic effects such as deviations between the real background and the model, have a larger effect on extended sources and thus detection likelihoods of extended sources are more uncertain.

PN_3_Det_ML
The PN band 3 detection likelihood. Maximum likelihoods are derived by the SAS task emldetect. The individual-band maximum likelihood values (bands 1 - 5, 9) stand for the detection likelihood of the source, L = - ln p, where p is the probability of the detection occurring by chance. While the detection likelihood of an extended source is computed in the same way, systematic effects such as deviations between the real background and the model, have a larger effect on extended sources and thus detection likelihoods of extended sources are more uncertain.

PN_4_Det_ML
The PN band 4 detection likelihood. Maximum likelihoods are derived by the SAS task emldetect. The individual-band maximum likelihood values (bands 1 - 5, 9) stand for the detection likelihood of the source, L = - ln p, where p is the probability of the detection occurring by chance. While the detection likelihood of an extended source is computed in the same way, systematic effects such as deviations between the real background and the model, have a larger effect on extended sources and thus detection likelihoods of extended sources are more uncertain.

PN_5_Det_ML
The PN band 5 detection likelihood. Maximum likelihoods are derived by the SAS task emldetect. The individual-band maximum likelihood values (bands 1 - 5, 9) stand for the detection likelihood of the source, L = - ln p, where p is the probability of the detection occurring by chance. While the detection likelihood of an extended source is computed in the same way, systematic effects such as deviations between the real background and the model, have a larger effect on extended sources and thus detection likelihoods of extended sources are more uncertain.

PN_8_Det_ML
The PN combined band 8 detection likelihood. Maximum likelihoods are derived by the SAS task emldetect. The individual-band maximum likelihood values (bands 1 - 5, 9) stand for the detection likelihood of the source, L = - ln p, where p is the probability of the detection occurring by chance. While the detection likelihood of an extended source is computed in the same way, systematic effects such as deviations between the real background and the model, have a larger effect on extended sources and thus detection likelihoods of extended sources are more uncertain.

PN_9_Det_ML
The PN band 9 detection likelihood. Maximum likelihoods are derived by the SAS task emldetect. The individual-band maximum likelihood values (bands 1 - 5, 9) stand for the detection likelihood of the source, L = - ln p, where p is the probability of the detection occurring by chance. While the detection likelihood of an extended source is computed in the same way, systematic effects such as deviations between the real background and the model, have a larger effect on extended sources and thus detection likelihoods of extended sources are more uncertain.

M1_1_Det_ML
The M1 band 1 detection likelihood. Maximum likelihoods are derived by the SAS task emldetect. The individual-band maximum likelihood values (bands 1 - 5, 9) stand for the detection likelihood of the source, L = - ln p, where p is the probability of the detection occurring by chance. While the detection likelihood of an extended source is computed in the same way, systematic effects such as deviations between the real background and the model, have a larger effect on extended sources and thus detection likelihoods of extended sources are more uncertain.

M1_2_Det_ML
The M1 band 2 detection likelihood. Maximum likelihoods are derived by the SAS task emldetect. The individual-band maximum likelihood values (bands 1 - 5, 9) stand for the detection likelihood of the source, L = - ln p, where p is the probability of the detection occurring by chance. While the detection likelihood of an extended source is computed in the same way, systematic effects such as deviations between the real background and the model, have a larger effect on extended sources and thus detection likelihoods of extended sources are more uncertain.

M1_3_Det_ML
The M1 band 3 detection likelihood. Maximum likelihoods are derived by the SAS task emldetect. The individual-band maximum likelihood values (bands 1 - 5, 9) stand for the detection likelihood of the source, L = - ln p, where p is the probability of the detection occurring by chance. While the detection likelihood of an extended source is computed in the same way, systematic effects such as deviations between the real background and the model, have a larger effect on extended sources and thus detection likelihoods of extended sources are more uncertain.

M1_4_Det_ML
The M1 band 4 detection likelihood. Maximum likelihoods are derived by the SAS task emldetect. The individual-band maximum likelihood values (bands 1 - 5, 9) stand for the detection likelihood of the source, L = - ln p, where p is the probability of the detection occurring by chance. While the detection likelihood of an extended source is computed in the same way, systematic effects such as deviations between the real background and the model, have a larger effect on extended sources and thus detection likelihoods of extended sources are more uncertain.

M1_5_Det_ML
The M1 band 5 detection likelihood. Maximum likelihoods are derived by the SAS task emldetect. The individual-band maximum likelihood values (bands 1 - 5, 9) stand for the detection likelihood of the source, L = - ln p, where p is the probability of the detection occurring by chance. While the detection likelihood of an extended source is computed in the same way, systematic effects such as deviations between the real background and the model, have a larger effect on extended sources and thus detection likelihoods of extended sources are more uncertain.

M1_8_Det_ML
The M1 combined band 8 detection likelihood. Maximum likelihoods are derived by the SAS task emldetect. The individual-band maximum likelihood values (bands 1 - 5, 9) stand for the detection likelihood of the source, L = - ln p, where p is the probability of the detection occurring by chance. While the detection likelihood of an extended source is computed in the same way, systematic effects such as deviations between the real background and the model, have a larger effect on extended sources and thus detection likelihoods of extended sources are more uncertain.

M1_9_Det_ML
The M1 band 9 detection likelihood. Maximum likelihoods are derived by the SAS task emldetect. The individual-band maximum likelihood values (bands 1 - 5, 9) stand for the detection likelihood of the source, L = - ln p, where p is the probability of the detection occurring by chance. While the detection likelihood of an extended source is computed in the same way, systematic effects such as deviations between the real background and the model, have a larger effect on extended sources and thus detection likelihoods of extended sources are more uncertain.

M2_1_Det_ML
The M2 band 1 detection likelihood. Maximum likelihoods are derived by the SAS task emldetect. The individual-band maximum likelihood values (bands 1 - 5, 9) stand for the detection likelihood of the source, L = - ln p, where p is the probability of the detection occurring by chance. While the detection likelihood of an extended source is computed in the same way, systematic effects such as deviations between the real background and the model, have a larger effect on extended sources and thus detection likelihoods of extended sources are more uncertain.

M2_2_Det_ML
The M2 band 2 detection likelihood. Maximum likelihoods are derived by the SAS task emldetect. The individual-band maximum likelihood values (bands 1 - 5, 9) stand for the detection likelihood of the source, L = - ln p, where p is the probability of the detection occurring by chance. While the detection likelihood of an extended source is computed in the same way, systematic effects such as deviations between the real background and the model, have a larger effect on extended sources and thus detection likelihoods of extended sources are more uncertain.

M2_3_Det_ML
The M2 band 3 detection likelihood. Maximum likelihoods are derived by the SAS task emldetect. The individual-band maximum likelihood values (bands 1 - 5, 9) stand for the detection likelihood of the source, L = - ln p, where p is the probability of the detection occurring by chance. While the detection likelihood of an extended source is computed in the same way, systematic effects such as deviations between the real background and the model, have a larger effect on extended sources and thus detection likelihoods of extended sources are more uncertain.

M2_4_Det_ML
The M2 band 4 detection likelihood. Maximum likelihoods are derived by the SAS task emldetect. The individual-band maximum likelihood values (bands 1 - 5, 9) stand for the detection likelihood of the source, L = - ln p, where p is the probability of the detection occurring by chance. While the detection likelihood of an extended source is computed in the same way, systematic effects such as deviations between the real background and the model, have a larger effect on extended sources and thus detection likelihoods of extended sources are more uncertain.

M2_5_Det_ML
The M2 band 5 detection likelihood. Maximum likelihoods are derived by the SAS task emldetect. The individual-band maximum likelihood values (bands 1 - 5, 9) stand for the detection likelihood of the source, L = - ln p, where p is the probability of the detection occurring by chance. While the detection likelihood of an extended source is computed in the same way, systematic effects such as deviations between the real background and the model, have a larger effect on extended sources and thus detection likelihoods of extended sources are more uncertain.

M2_8_Det_ML
The M2 combined band 8 detection likelihood. Maximum likelihoods are derived by the SAS task emldetect. The individual-band maximum likelihood values (bands 1 - 5, 9) stand for the detection likelihood of the source, L = - ln p, where p is the probability of the detection occurring by chance. While the detection likelihood of an extended source is computed in the same way, systematic effects such as deviations between the real background and the model, have a larger effect on extended sources and thus detection likelihoods of extended sources are more uncertain.

M2_9_Det_ML
The M2 band 9 detection likelihood. Maximum likelihoods are derived by the SAS task emldetect. The individual-band maximum likelihood values (bands 1 - 5, 9) stand for the detection likelihood of the source, L = - ln p, where p is the probability of the detection occurring by chance. While the detection likelihood of an extended source is computed in the same way, systematic effects such as deviations between the real background and the model, have a larger effect on extended sources and thus detection likelihoods of extended sources are more uncertain.

EP_Extent
The EPIC extent radius (arcseconds). The extent radius and error as well as the extent likelihood of a source detected as extended is determined by the SAS task emldetect. It is determined by convolving a beta-model profile with the source PSF and fitting the result to the source image. Anything below 6" is considered to be a point source and the extent is set to zero. To avoid non-converging fitting an upper limit of 80" is imposed.

EP_Extent_Error
The uncertainty in the EPIC extent radius (arcseconds). The extent radius and error as well as the extent likelihood of a source detected as extended is determined by the SAS task emldetect. It is determined by convolving a beta-model profile with the source PSF and fitting the result to the source image. Anything below 6" is considered to be a point source and the extent is set to zero. To avoid non-converging fitting an upper limit of 80" is imposed.

EP_Extent_ML
The EPIC extent likelihood. The extent radius and error as well as the extent likelihood of a source detected as extended is determined by the SAS task emldetect. The extent likelihood is the likelihood of the detection being extended as given by EXTENT_ML = - ln(P), where P is the probability of the extent occurring by chance.

EP_HR1
The EPIC hardness ratio HR1 for bands 1 and 2. The hardness ratios for each camera are derived by the SAS task emldetect. They are defined as the ratio between the bands A and B:

              HR(A,B) = (band B - band A) / (band A + band B).
  

Note that in the case where the rate in one band is 0.0 (i.e., too faint to be detected in this band) the hardness ratio will be -1 or +1 which is only a lower or upper limit, respectively. In cases where the rate in both bands is zero, the hardness ratio is undefined (NULL).

There are four hardness ratios (n) using the following bands:

              HR1: bands 1 & 2
              HR2: bands 2 & 3
              HR3: bands 3 & 4
              HR4: bands 4 & 5
  

EPIC hardness ratios are calculated by the SAS task srcmatch and are averaged over all three cameras (PN, M1, M2). Note that no energy conversion factor was used and that the EPIC hardness ratios are de facto not hardness ratios but an equivalent number helpful to characterize the hardness of a source.

EP_HR1_Error
The uncertainty in the EPIC hardness ratio for bands 1 and 2. Errors are the 1-sigma error on the hardness ratio 1 as derived by the SAS task emldetect.

EP_HR2
The EPIC hardness ratio HR2 for bands 2 and 3. The hardness ratios for each camera are derived by the SAS task emldetect. They are defined as the ratio between the bands A and B:

              HR(A,B) = (band B - band A) / (band A + band B).
  

Note that in the case where the rate in one band is 0.0 (i.e., too faint to be detected in this band) the hardness ratio will be -1 or +1 which is only a lower or upper limit, respectively. In cases where the rate in both bands is zero, the hardness ratio is undefined (NULL).

There are four hardness ratios (n) using the following bands:

              HR1: bands 1 & 2
              HR2: bands 2 & 3
              HR3: bands 3 & 4
              HR4: bands 4 & 5
  

EPIC hardness ratios are calculated by the SAS task srcmatch and are averaged over all three cameras (PN, M1, M2). Note that no energy conversion factor was used and that the EPIC hardness ratios are de facto not hardness ratios but an equivalent number helpful to characterize the hardness of a source.

EP_HR2_Error
The uncertainty in the EPIC hardness ratio for bands 2 and 3. Errors are the 1-sigma error on the hardness ratio 1 as derived by the SAS task emldetect.

EP_HR3
The EPIC hardness ratio HR3 for bands 3 and 4. The hardness ratios for each camera are derived by the SAS task emldetect. They are defined as the ratio between the bands A and B:

              HR(A,B) = (band B - band A) / (band A + band B).
  

Note that in the case where the rate in one band is 0.0 (i.e., too faint to be detected in this band) the hardness ratio will be -1 or +1 which is only a lower or upper limit, respectively. In cases where the rate in both bands is zero, the hardness ratio is undefined (NULL).

There are four hardness ratios (n) using the following bands:

              HR1: bands 1 & 2
              HR2: bands 2 & 3
              HR3: bands 3 & 4
              HR4: bands 4 & 5
  

EPIC hardness ratios are calculated by the SAS task srcmatch and are averaged over all three cameras (PN, M1, M2). Note that no energy conversion factor was used and that the EPIC hardness ratios are de facto not hardness ratios but an equivalent number helpful to characterize the hardness of a source.

EP_HR3_Error
The uncertainty in the EPIC hardness ratio for bands 3 and 4. Errors are the 1-sigma error on the hardness ratio 1 as derived by the SAS task emldetect.

EP_HR4
The EPIC hardness ratio HR4 for bands 4 and 5. The hardness ratios for each camera are derived by the SAS task emldetect. They are defined as the ratio between the bands A and B:

              HR(A,B) = (band B - band A) / (band A + band B).
  

Note that in the case where the rate in one band is 0.0 (i.e., too faint to be detected in this band) the hardness ratio will be -1 or +1 which is only a lower or upper limit, respectively. In cases where the rate in both bands is zero, the hardness ratio is undefined (NULL).

There are four hardness ratios (n) using the following bands:

              HR1: bands 1 & 2
              HR2: bands 2 & 3
              HR3: bands 3 & 4
              HR4: bands 4 & 5
  

EPIC hardness ratios are calculated by the SAS task srcmatch and are averaged over all three cameras (PN, M1, M2). Note that no energy conversion factor was used and that the EPIC hardness ratios are de facto not hardness ratios but an equivalent number helpful to characterize the hardness of a source.

EP_HR4_Error
The uncertainty in the EPIC hardness ratio for bands 4 and 5. Errors are the 1-sigma error on the hardness ratio 1 as derived by the SAS task emldetect.

PN_HR1
The PN hardness ratio HR1 for bands 1 and 2. The hardness ratios for each camera are derived by the SAS task emldetect. They are defined as the ratio between the bands A and B:

              HR(A,B) = (band B - band A) / (band A + band B).
  

Note that in the case where the rate in one band is 0.0 (i.e., too faint to be detected in this band) the hardness ratio will be -1 or +1 which is only a lower or upper limit, respectively. In cases where the rate in both bands is zero, the hardness ratio is undefined (NULL).

There are four hardness ratios (n) using the following bands:

              HR1: bands 1 & 2
              HR2: bands 2 & 3
              HR3: bands 3 & 4
              HR4: bands 4 & 5
  

PN_HR1_Error
The uncertainty in the PN hardness ratio for bands 1 and 2. Errors are the 1-sigma error on the hardness ratio 1 as derived by the SAS task emldetect.

PN_HR2
The PN hardness ratio HR2 for bands 2 and 3. The hardness ratios for each camera are derived by the SAS task emldetect. They are defined as the ratio between the bands A and B:

              HR(A,B) = (band B - band A) / (band A + band B).
  

Note that in the case where the rate in one band is 0.0 (i.e., too faint to be detected in this band) the hardness ratio will be -1 or +1 which is only a lower or upper limit, respectively. In cases where the rate in both bands is zero, the hardness ratio is undefined (NULL).

There are four hardness ratios (n) using the following bands:

              HR1: bands 1 & 2
              HR2: bands 2 & 3
              HR3: bands 3 & 4
              HR4: bands 4 & 5
  

PN_HR2_Error
The uncertainty in the PN hardness ratio for bands 2 and 3. Errors are the 1-sigma error on the hardness ratio 1 as derived by the SAS task emldetect.

PN_HR3
The PN hardness ratio HR3 for bands 3 and 4. The hardness ratios for each camera are derived by the SAS task emldetect. They are defined as the ratio between the bands A and B:

              HR(A,B) = (band B - band A) / (band A + band B).
  

Note that in the case where the rate in one band is 0.0 (i.e., too faint to be detected in this band) the hardness ratio will be -1 or +1 which is only a lower or upper limit, respectively. In cases where the rate in both bands is zero, the hardness ratio is undefined (NULL).

There are four hardness ratios (n) using the following bands:

              HR1: bands 1 & 2
              HR2: bands 2 & 3
              HR3: bands 3 & 4
              HR4: bands 4 & 5
  

PN_HR3_Error
The uncertainty in the PN hardness ratio for bands 3 and 4. Errors are the 1-sigma error on the hardness ratio 1 as derived by the SAS task emldetect.

PN_HR4
The PN hardness ratio HR4 for bands 4 and 5. The hardness ratios for each camera are derived by the SAS task emldetect. They are defined as the ratio between the bands A and B:

              HR(A,B) = (band B - band A) / (band A + band B).
  

Note that in the case where the rate in one band is 0.0 (i.e., too faint to be detected in this band) the hardness ratio will be -1 or +1 which is only a lower or upper limit, respectively. In cases where the rate in both bands is zero, the hardness ratio is undefined (NULL).

There are four hardness ratios (n) using the following bands:

              HR1: bands 1 & 2
              HR2: bands 2 & 3
              HR3: bands 3 & 4
              HR4: bands 4 & 5
  

PN_HR4_Error
The uncertainty in the PN hardness ratio for bands 4 and 5. Errors are the 1-sigma error on the hardness ratio 1 as derived by the SAS task emldetect.

M1_HR1
The M1 hardness ratio HR1 for bands 1 and 2. The hardness ratios for each camera are derived by the SAS task emldetect. They are defined as the ratio between the bands A and B:

              HR(A,B) = (band B - band A) / (band A + band B).
  

Note that in the case where the rate in one band is 0.0 (i.e., too faint to be detected in this band) the hardness ratio will be -1 or +1 which is only a lower or upper limit, respectively. In cases where the rate in both bands is zero, the hardness ratio is undefined (NULL).

There are four hardness ratios (n) using the following bands:

              HR1: bands 1 & 2
              HR2: bands 2 & 3
              HR3: bands 3 & 4
              HR4: bands 4 & 5
  

M1_HR1_Error
The uncertainty in the M1 hardness ratio for bands 1 and 2. Errors are the 1-sigma error on the hardness ratio 1 as derived by the SAS task emldetect.

M1_HR2
The M1 hardness ratio HR2 for bands 2 and 3. The hardness ratios for each camera are derived by the SAS task emldetect. They are defined as the ratio between the bands A and B:

              HR(A,B) = (band B - band A) / (band A + band B).
  

Note that in the case where the rate in one band is 0.0 (i.e., too faint to be detected in this band) the hardness ratio will be -1 or +1 which is only a lower or upper limit, respectively. In cases where the rate in both bands is zero, the hardness ratio is undefined (NULL).

There are four hardness ratios (n) using the following bands:

              HR1: bands 1 & 2
              HR2: bands 2 & 3
              HR3: bands 3 & 4
              HR4: bands 4 & 5
  

M1_HR2_Error
The uncertainty in the M1 hardness ratio for bands 2 and 3. Errors are the 1-sigma error on the hardness ratio 1 as derived by the SAS task emldetect.

M1_HR3
The M1 hardness ratio HR3 for bands 3 and 4. The hardness ratios for each camera are derived by the SAS task emldetect. They are defined as the ratio between the bands A and B:

              HR(A,B) = (band B - band A) / (band A + band B).
  

Note that in the case where the rate in one band is 0.0 (i.e., too faint to be detected in this band) the hardness ratio will be -1 or +1 which is only a lower or upper limit, respectively. In cases where the rate in both bands is zero, the hardness ratio is undefined (NULL).

There are four hardness ratios (n) using the following bands:

              HR1: bands 1 & 2
              HR2: bands 2 & 3
              HR3: bands 3 & 4
              HR4: bands 4 & 5
  

M1_HR3_Error
The uncertainty in the M1 hardness ratio for bands 3 and 4. Errors are the 1-sigma error on the hardness ratio 1 as derived by the SAS task emldetect.

M1_HR4
The M1 hardness ratio HR4 for bands 4 and 5. The hardness ratios for each camera are derived by the SAS task emldetect. They are defined as the ratio between the bands A and B:

              HR(A,B) = (band B - band A) / (band A + band B).
  

Note that in the case where the rate in one band is 0.0 (i.e., too faint to be detected in this band) the hardness ratio will be -1 or +1 which is only a lower or upper limit, respectively. In cases where the rate in both bands is zero, the hardness ratio is undefined (NULL).

There are four hardness ratios (n) using the following bands:

              HR1: bands 1 & 2
              HR2: bands 2 & 3
              HR3: bands 3 & 4
              HR4: bands 4 & 5
  

M1_HR4_Error
The uncertainty in the M1 hardness ratio for bands 4 and 5. Errors are the 1-sigma error on the hardness ratio 1 as derived by the SAS task emldetect.

M2_HR1
The M2 hardness ratio HR1 for bands 1 and 2. The hardness ratios for each camera are derived by the SAS task emldetect. They are defined as the ratio between the bands A and B:

              HR(A,B) = (band B - band A) / (band A + band B).
  

Note that in the case where the rate in one band is 0.0 (i.e., too faint to be detected in this band) the hardness ratio will be -1 or +1 which is only a lower or upper limit, respectively. In cases where the rate in both bands is zero, the hardness ratio is undefined (NULL).

There are four hardness ratios (n) using the following bands:

              HR1: bands 1 & 2
              HR2: bands 2 & 3
              HR3: bands 3 & 4
              HR4: bands 4 & 5
  

M2_HR1_Error
The uncertainty in the M2 hardness ratio for bands 1 and 2. Errors are the 1-sigma error on the hardness ratio 1 as derived by the SAS task emldetect.

M2_HR2
The M2 hardness ratio HR2 for bands 2 and 3. The hardness ratios for each camera are derived by the SAS task emldetect. They are defined as the ratio between the bands A and B:

              HR(A,B) = (band B - band A) / (band A + band B).
  

Note that in the case where the rate in one band is 0.0 (i.e., too faint to be detected in this band) the hardness ratio will be -1 or +1 which is only a lower or upper limit, respectively. In cases where the rate in both bands is zero, the hardness ratio is undefined (NULL).

There are four hardness ratios (n) using the following bands:

              HR1: bands 1 & 2
              HR2: bands 2 & 3
              HR3: bands 3 & 4
              HR4: bands 4 & 5
  

M2_HR2_Error
The uncertainty in the M2 hardness ratio for bands 2 and 3. Errors are the 1-sigma error on the hardness ratio 1 as derived by the SAS task emldetect.

M2_HR3
The M2 hardness ratio HR3 for bands 3 and 4. The hardness ratios for each camera are derived by the SAS task emldetect. They are defined as the ratio between the bands A and B:

              HR(A,B) = (band B - band A) / (band A + band B).
  

Note that in the case where the rate in one band is 0.0 (i.e., too faint to be detected in this band) the hardness ratio will be -1 or +1 which is only a lower or upper limit, respectively. In cases where the rate in both bands is zero, the hardness ratio is undefined (NULL).

There are four hardness ratios (n) using the following bands:

              HR1: bands 1 & 2
              HR2: bands 2 & 3
              HR3: bands 3 & 4
              HR4: bands 4 & 5
  

M2_HR3_Error
The uncertainty in the M2 hardness ratio for bands 3 and 4. Errors are the 1-sigma error on the hardness ratio 1 as derived by the SAS task emldetect.

M2_HR4
The M2 hardness ratio HR4 for bands 4 and 5. The hardness ratios for each camera are derived by the SAS task emldetect. They are defined as the ratio between the bands A and B:

              HR(A,B) = (band B - band A) / (band A + band B).
  

Note that in the case where the rate in one band is 0.0 (i.e., too faint to be detected in this band) the hardness ratio will be -1 or +1 which is only a lower or upper limit, respectively. In cases where the rate in both bands is zero, the hardness ratio is undefined (NULL).

There are four hardness ratios (n) using the following bands:

              HR1: bands 1 & 2
              HR2: bands 2 & 3
              HR3: bands 3 & 4
              HR4: bands 4 & 5
  

M2_HR4_Error
The uncertainty in the M2 hardness ratio for bands 4 and 5. Errors are the 1-sigma error on the hardness ratio 1 as derived by the SAS task emldetect.

PN_1_Exposure
The PN band 1 exposure map value (s). The exposure maps are made by the SAS task eexpmap; they combine the mirror vignetting, detector efficiency, bad pixels and CCD gaps. The exposure map values in the catalog are given in seconds and are derived by the SAS task emldetect as the PSF weighted mean of the area of the sub-images (radius 60 arcseconds) in the individual-band exposure maps.

PN_2_Exposure
The PN band 2 exposure map value (s). The exposure maps are made by the SAS task eexpmap; they combine the mirror vignetting, detector efficiency, bad pixels and CCD gaps. The exposure map values in the catalog are given in seconds and are derived by the SAS task emldetect as the PSF weighted mean of the area of the sub-images (radius 60 arcseconds) in the individual-band exposure maps.

PN_3_Exposure
The PN band 3 exposure map value (s). The exposure maps are made by the SAS task eexpmap; they combine the mirror vignetting, detector efficiency, bad pixels and CCD gaps. The exposure map values in the catalog are given in seconds and are derived by the SAS task emldetect as the PSF weighted mean of the area of the sub-images (radius 60 arcseconds) in the individual-band exposure maps.

PN_4_Exposure
The PN band 4 exposure map value (s). The exposure maps are made by the SAS task eexpmap; they combine the mirror vignetting, detector efficiency, bad pixels and CCD gaps. The exposure map values in the catalog are given in seconds and are derived by the SAS task emldetect as the PSF weighted mean of the area of the sub-images (radius 60 arcseconds) in the individual-band exposure maps.

PN_5_Exposure
The PN band 5 exposure map value (s). The exposure maps are made by the SAS task eexpmap; they combine the mirror vignetting, detector efficiency, bad pixels and CCD gaps. The exposure map values in the catalog are given in seconds and are derived by the SAS task emldetect as the PSF weighted mean of the area of the sub-images (radius 60 arcseconds) in the individual-band exposure maps.

M1_1_Exposure
The M1 band 1 exposure map value (s). The exposure maps are made by the SAS task eexpmap; they combine the mirror vignetting, detector efficiency, bad pixels and CCD gaps. The exposure map values in the catalog are given in seconds and are derived by the SAS task emldetect as the PSF weighted mean of the area of the sub-images (radius 60 arcseconds) in the individual-band exposure maps.

M1_2_Exposure
The M1 band 2 exposure map value (s). The exposure maps are made by the SAS task eexpmap; they combine the mirror vignetting, detector efficiency, bad pixels and CCD gaps. The exposure map values in the catalog are given in seconds and are derived by the SAS task emldetect as the PSF weighted mean of the area of the sub-images (radius 60 arcseconds) in the individual-band exposure maps.

M1_3_Exposure
The M1 band 3 exposure map value (s). The exposure maps are made by the SAS task eexpmap; they combine the mirror vignetting, detector efficiency, bad pixels and CCD gaps. The exposure map values in the catalog are given in seconds and are derived by the SAS task emldetect as the PSF weighted mean of the area of the sub-images (radius 60 arcseconds) in the individual-band exposure maps.

M1_4_Exposure
The M1 band 4 exposure map value (s). The exposure maps are made by the SAS task eexpmap; they combine the mirror vignetting, detector efficiency, bad pixels and CCD gaps. The exposure map values in the catalog are given in seconds and are derived by the SAS task emldetect as the PSF weighted mean of the area of the sub-images (radius 60 arcseconds) in the individual-band exposure maps.

M1_5_Exposure
The M1 band 5 exposure map value (s). The exposure maps are made by the SAS task eexpmap; they combine the mirror vignetting, detector efficiency, bad pixels and CCD gaps. The exposure map values in the catalog are given in seconds and are derived by the SAS task emldetect as the PSF weighted mean of the area of the sub-images (radius 60 arcseconds) in the individual-band exposure maps.

M2_1_Exposure
The M2 band 1 exposure map value (s). The exposure maps are made by the SAS task eexpmap; they combine the mirror vignetting, detector efficiency, bad pixels and CCD gaps. The exposure map values in the catalog are given in seconds and are derived by the SAS task emldetect as the PSF weighted mean of the area of the sub-images (radius 60 arcseconds) in the individual-band exposure maps.

M2_2_Exposure
The M2 band 2 exposure map value (s). The exposure maps are made by the SAS task eexpmap; they combine the mirror vignetting, detector efficiency, bad pixels and CCD gaps. The exposure map values in the catalog are given in seconds and are derived by the SAS task emldetect as the PSF weighted mean of the area of the sub-images (radius 60 arcseconds) in the individual-band exposure maps.

M2_3_Exposure
The M2 band 3 exposure map value (s). The exposure maps are made by the SAS task eexpmap; they combine the mirror vignetting, detector efficiency, bad pixels and CCD gaps. The exposure map values in the catalog are given in seconds and are derived by the SAS task emldetect as the PSF weighted mean of the area of the sub-images (radius 60 arcseconds) in the individual-band exposure maps.

M2_4_Exposure
The M2 band 4 exposure map value (s). The exposure maps are made by the SAS task eexpmap; they combine the mirror vignetting, detector efficiency, bad pixels and CCD gaps. The exposure map values in the catalog are given in seconds and are derived by the SAS task emldetect as the PSF weighted mean of the area of the sub-images (radius 60 arcseconds) in the individual-band exposure maps.

M2_5_Exposure
The M2 band 5 exposure map value (s). The exposure maps are made by the SAS task eexpmap; they combine the mirror vignetting, detector efficiency, bad pixels and CCD gaps. The exposure map values in the catalog are given in seconds and are derived by the SAS task emldetect as the PSF weighted mean of the area of the sub-images (radius 60 arcseconds) in the individual-band exposure maps.

PN_1_Bg
The PN band 1 background map value (ct/pixel). The background maps are made by the SAS task esplinemap; they are made using a 12 x 12 nodes spline fit on the source-free individual-band images. The background map values in the catalog are given in counts per pixel and are derived by the SAS task emldetect as the background map value at the given detection position. Note that the source fitting routine uses the background map itself rather than the single value given here. The value is zero if the detection position lies outside the FOV.

PN_2_Bg
The PN band 2 background map value (ct/pixel). The background maps are made by the SAS task esplinemap; they are made using a 12 x 12 nodes spline fit on the source-free individual-band images. The background map values in the catalog are given in counts per pixel and are derived by the SAS task emldetect as the background map value at the given detection position. Note that the source fitting routine uses the background map itself rather than the single value given here. The value is zero if the detection position lies outside the FOV.

PN_3_Bg
The PN band 3 background map value (ct/pixel). The background maps are made by the SAS task esplinemap; they are made using a 12 x 12 nodes spline fit on the source-free individual-band images. The background map values in the catalog are given in counts per pixel and are derived by the SAS task emldetect as the background map value at the given detection position. Note that the source fitting routine uses the background map itself rather than the single value given here. The value is zero if the detection position lies outside the FOV.

PN_4_Bg
The PN band 4 background map value (ct/pixel). The background maps are made by the SAS task esplinemap; they are made using a 12 x 12 nodes spline fit on the source-free individual-band images. The background map values in the catalog are given in counts per pixel and are derived by the SAS task emldetect as the background map value at the given detection position. Note that the source fitting routine uses the background map itself rather than the single value given here. The value is zero if the detection position lies outside the FOV.

PN_5_Bg
The PN band 5 background map value (ct/pixel). The background maps are made by the SAS task esplinemap; they are made using a 12 x 12 nodes spline fit on the source-free individual-band images. The background map values in the catalog are given in counts per pixel and are derived by the SAS task emldetect as the background map value at the given detection position. Note that the source fitting routine uses the background map itself rather than the single value given here. The value is zero if the detection position lies outside the FOV.

M1_1_Bg
The M1 band 1 background map value (ct/pixel). The background maps are made by the SAS task esplinemap; they are made using a 12 x 12 nodes spline fit on the source-free individual-band images. The background map values in the catalog are given in counts per pixel and are derived by the SAS task emldetect as the background map value at the given detection position. Note that the source fitting routine uses the background map itself rather than the single value given here. The value is zero if the detection position lies outside the FOV.

M1_2_Bg
The M1 band 2 background map value (ct/pixel). The background maps are made by the SAS task esplinemap; they are made using a 12 x 12 nodes spline fit on the source-free individual-band images. The background map values in the catalog are given in counts per pixel and are derived by the SAS task emldetect as the background map value at the given detection position. Note that the source fitting routine uses the background map itself rather than the single value given here. The value is zero if the detection position lies outside the FOV.

M1_3_Bg
The M1 band 3 background map value (ct/pixel). The background maps are made by the SAS task esplinemap; they are made using a 12 x 12 nodes spline fit on the source-free individual-band images. The background map values in the catalog are given in counts per pixel and are derived by the SAS task emldetect as the background map value at the given detection position. Note that the source fitting routine uses the background map itself rather than the single value given here. The value is zero if the detection position lies outside the FOV.

M1_4_Bg
The M1 band 4 background map value (ct/pixel). The background maps are made by the SAS task esplinemap; they are made using a 12 x 12 nodes spline fit on the source-free individual-band images. The background map values in the catalog are given in counts per pixel and are derived by the SAS task emldetect as the background map value at the given detection position. Note that the source fitting routine uses the background map itself rather than the single value given here. The value is zero if the detection position lies outside the FOV.

M1_5_Bg
The M1 band 5 background map value (ct/pixel). The background maps are made by the SAS task esplinemap; they are made using a 12 x 12 nodes spline fit on the source-free individual-band images. The background map values in the catalog are given in counts per pixel and are derived by the SAS task emldetect as the background map value at the given detection position. Note that the source fitting routine uses the background map itself rather than the single value given here. The value is zero if the detection position lies outside the FOV.

M2_1_Bg
The M2 band 1 background map value (ct/pixel). The background maps are made by the SAS task esplinemap; they are made using a 12 x 12 nodes spline fit on the source-free individual-band images. The background map values in the catalog are given in counts per pixel and are derived by the SAS task emldetect as the background map value at the given detection position. Note that the source fitting routine uses the background map itself rather than the single value given here. The value is zero if the detection position lies outside the FOV.

M2_2_Bg
The M2 band 2 background map value (ct/pixel). The background maps are made by the SAS task esplinemap; they are made using a 12 x 12 nodes spline fit on the source-free individual-band images. The background map values in the catalog are given in counts per pixel and are derived by the SAS task emldetect as the background map value at the given detection position. Note that the source fitting routine uses the background map itself rather than the single value given here. The value is zero if the detection position lies outside the FOV.

M2_3_Bg
The M2 band 3 background map value (ct/pixel). The background maps are made by the SAS task esplinemap; they are made using a 12 x 12 nodes spline fit on the source-free individual-band images. The background map values in the catalog are given in counts per pixel and are derived by the SAS task emldetect as the background map value at the given detection position. Note that the source fitting routine uses the background map itself rather than the single value given here. The value is zero if the detection position lies outside the FOV.

M2_4_Bg
The M2 band 4 background map value (ct/pixel). The background maps are made by the SAS task esplinemap; they are made using a 12 x 12 nodes spline fit on the source-free individual-band images. The background map values in the catalog are given in counts per pixel and are derived by the SAS task emldetect as the background map value at the given detection position. Note that the source fitting routine uses the background map itself rather than the single value given here. The value is zero if the detection position lies outside the FOV.

M2_5_Bg
The M2 band 5 background map value (ct/pixel). The background maps are made by the SAS task esplinemap; they are made using a 12 x 12 nodes spline fit on the source-free individual-band images. The background map values in the catalog are given in counts per pixel and are derived by the SAS task emldetect as the background map value at the given detection position. Note that the source fitting routine uses the background map itself rather than the single value given here. The value is zero if the detection position lies outside the FOV.

PN_Pileup
The estimate of the pile-up level in EPIC/PN detection. A value below 1 corresponds to negligible pile-up (less than a few % flux loss) while values larger than 10 denote heavy pile-up.

M1_Pileup
The estimate of the pile-up level in EPIC/PN detection. A value below 1 corresponds to negligible pile-up (less than a few % flux loss) while values larger than 10 denote heavy pile-up.

M2_Pileup
The estimate of the pile-up level in EPIC/PN detection. A value below 1 corresponds to negligible pile-up (less than a few % flux loss) while values larger than 10 denote heavy pile-up.

PN_1_Vig
The PN band 1 vignetting value. The vignetting values in the catalog are derived by the SAS task emldetect; they are a function of energy band and off-axis angle. (Vignetting values used in the source parametrization come from the vignetted exposure maps.)

PN_2_Vig
The PN band 2 vignetting value. The vignetting values in the catalog are derived by the SAS task emldetect; they are a function of energy band and off-axis angle. (Vignetting values used in the source parametrization come from the vignetted exposure maps.)

PN_3_Vig
The PN band 3 vignetting value. The vignetting values in the catalog are derived by the SAS task emldetect; they are a function of energy band and off-axis angle. (Vignetting values used in the source parametrization come from the vignetted exposure maps.)

PN_4_Vig
The PN band 4 vignetting value. The vignetting values in the catalog are derived by the SAS task emldetect; they are a function of energy band and off-axis angle. (Vignetting values used in the source parametrization come from the vignetted exposure maps.)

PN_5_Vig
The PN band 5 vignetting value. The vignetting values in the catalog are derived by the SAS task emldetect; they are a function of energy band and off-axis angle. (Vignetting values used in the source parametrization come from the vignetted exposure maps.)

M1_1_Vig
The M1 band 1 vignetting value. The vignetting values in the catalog are derived by the SAS task emldetect; they are a function of energy band and off-axis angle. (Vignetting values used in the source parametrization come from the vignetted exposure maps.)

M1_2_Vig
The M1 band 2 vignetting value. The vignetting values in the catalog are derived by the SAS task emldetect; they are a function of energy band and off-axis angle. (Vignetting values used in the source parametrization come from the vignetted exposure maps.)

M1_3_Vig
The M1 band 3 vignetting value. The vignetting values in the catalog are derived by the SAS task emldetect; they are a function of energy band and off-axis angle. (Vignetting values used in the source parametrization come from the vignetted exposure maps.)

M1_4_Vig
The M1 band 4 vignetting value. The vignetting values in the catalog are derived by the SAS task emldetect; they are a function of energy band and off-axis angle. (Vignetting values used in the source parametrization come from the vignetted exposure maps.)

M1_5_Vig
The M1 band 5 vignetting value. The vignetting values in the catalog are derived by the SAS task emldetect; they are a function of energy band and off-axis angle. (Vignetting values used in the source parametrization come from the vignetted exposure maps.)

M2_1_Vig
The M2 band 1 vignetting value. The vignetting values in the catalog are derived by the SAS task emldetect; they are a function of energy band and off-axis angle. (Vignetting values used in the source parametrization come from the vignetted exposure maps.)

M2_2_Vig
The M2 band 2 vignetting value. The vignetting values in the catalog are derived by the SAS task emldetect; they are a function of energy band and off-axis angle. (Vignetting values used in the source parametrization come from the vignetted exposure maps.)

M2_3_Vig
The M2 band 3 vignetting value. The vignetting values in the catalog are derived by the SAS task emldetect; they are a function of energy band and off-axis angle. (Vignetting values used in the source parametrization come from the vignetted exposure maps.)

M2_4_Vig
The M2 band 4 vignetting value. The vignetting values in the catalog are derived by the SAS task emldetect; they are a function of energy band and off-axis angle. (Vignetting values used in the source parametrization come from the vignetted exposure maps.)

M2_5_Vig
The M2 band 5 vignetting value. The vignetting values in the catalog are derived by the SAS task emldetect; they are a function of energy band and off-axis angle. (Vignetting values used in the source parametrization come from the vignetted exposure maps.)

PN_Ontime
The PN total good exposure time after GTI filtering, in seconds, of the CCD where the detection is positioned. Note that some source positions fall into CCD gaps or outside of the detector and will have therefore a NULL given.

M1_Ontime
The M1 total good exposure time after GTI filtering, in seconds, of the CCD where the detection is positioned. Note that some source positions fall into CCD gaps or outside of the detector and will have therefore a NULL given.

M2_Ontime
The M2 total good exposure time after GTI filtering, in seconds, of the CCD where the detection is positioned. Note that some source positions fall into CCD gaps or outside of the detector and will have therefore a NULL given.

EP_Ontime
The largest total good exposure time after GTI filtering, in seconds, of any of the individual cameras used.

PN_Offax
The distance between the detection position and the on-axis position on the PN detector, in arcminutes. Note that the off-axis angle for a camera can be larger than 15 arcminutes when the detection is located outside the FOV of that camera.

M1_Offax
The distance between the detection position and the on-axis position on the M1 detector, in arcminutes. Note that the off-axis angle for a camera can be larger than 15 arcminutes when the detection is located outside the FOV of that camera.

M2_Offax
The distance between the detection position and the on-axis position on the M2 detector, in arcminutes. Note that the off-axis angle for a camera can be larger than 15 arcminutes when the detection is located outside the FOV of that camera.

EP_Offax
The smallest off-axis angle (the angular distance between the detection position and the on-axis direction) of the individual camera values, in arcminutes.

PN_Maskfrac
The PSF weighted mean of the PN detector coverage of a detection as derived from the detection mask. It depends slightly on energy; only band 8 values are given here which are the minimum of the energy-dependent maskfrac values. Sources which have less than 0.15 of their PSF covered by the detector are considered as being not detected.

M1_Maskfrac
The PSF weighted mean of the M1 detector coverage of a detection as derived from the detection mask. It depends slightly on energy; only band 8 values are given here which are the minimum of the energy-dependent maskfrac values. Sources which have less than 0.15 of their PSF covered by the detector are considered as being not detected.

M2_Maskfrac
The PSF weighted mean of the M2 detector coverage of a detection as derived from the detection mask. It depends slightly on energy; only band 8 values are given here which are the minimum of the energy-dependent maskfrac values. Sources which have less than 0.15 of their PSF covered by the detector are considered as being not detected.

Dist_NN
The distance to the nearest neighbor detection, in arcseconds; it is derived by the SAS task emldetect. Emldetect uses an internal threshold of 6 arcseconds (before positional fitting) for splitting a source into two.

Sum_Flag
The summary flag of the source, derived from the EPIC flag (EP_FLAG, see 2XMM UG Sec. 3.1.2(h) at http://xmmssc-www.star.le.ac.uk/Catalogue/2XMM/UserGuide_xmmcat.html#AutFlags and 2XMM UG Sec. 3.2.6 at http://xmmssc-www.star.le.ac.uk/Catalogue/2XMM/UserGuide_xmmcat.html#CatVisScreen, but note also sections 3XMM-DR4 UG 3.11 and 3.7 at http://xmmssc-www.star.le.ac.uk/Catalogue/2XMM/UserGuide_xmmcat.html#CatVisScreen and http://xmmssc-www.star.le.ac.uk/Catalogue/3XMM-DR4/UserGuide_xmmcat.html#OOTFlag, respectively). It is 0 if none of the nine flags was set; it is set to 1 if at least one of the warning flags (flag 1, 2, 3, 9) was set but no possible-spurious-detection flag (flag 7, 8); it is set to 2 if at least one of the possible-spurious-detection flags (flag 7, 8) was set but not the manual flag (flag 11); it is set to 3 if the manual flag (flag 11) was set but no possible-spurious-detection flags (flag 7, 8); it is set to 4 if the manual flag (flag 11) as well as one of the possible-spurious-detection flags (flag 7, 8) is set. The meaning is thus:

     0 = good
     1 = source parameters may be affected
     2 = possibly spurious
     3 = located in a area where spurious detection may occur
     4 = located in a area where spurious detection may occur and possibly spurious
  
For details see Sec. 3.2.7 of the 2XMM UG.

EP_Flag
The EPIC flag string made of the flags 1 - 12 (counted from left to right): it combines the flags in each camera (PN_FLAG, M1_FLAG, M2_FLAG), that is, a flag is set in EP_FLAG if at least one of the camera-dependent flags is set.

PN_Flag
The PN flag string made of the flags 1 - 12 (counted from left to right) for the PN source detection. A flag is set to True according to the conditions summarized in Tab. 3.3a of the 2XMM Users Guide for the automatic flags, and in Tab. 3.3b of the 2XMM Users Guide for the manual flags. In cases where the camera was not used in the source detection, a dash is given. In cases where a source was not detected by the PN, the flags are all set to False (default).

M1_Flag
The M1 flag string made of the flags 1 - 12 (counted from left to right) for the M1 source detection. A flag is set to True according to the conditions summarized in Tab. 3.3a of the 2XMM Users Guide for the automatic flags, and Tab. 3.3b of the 2XMM Users Guide for the manual flags. In cases where the camera was not used in the source detection, a dash is given. In cases where a source was not detected by the M1, the flags are all set to False (default).

M2_Flag
The M2 flag string made of the flags 1 - 12 (counted from left to right) for the M2 source detection. A flag is set to True according to the conditions summarized in Tab. 3.3a of the 2XMM Users Guide for the automatic flags, and Tab. 3.3b of the 2XMM Users Guide for the manual flags. In cases where the camera was not used in the source detection, a dash is given. In cases where a source was not detected by the M2, the flags are all set to False (default).

Tseries_Flag
This flag is set to T(rue) to indicate that the source has a time series made in at least one exposure (see Sec. 3.6 of the UG at http://xmmssc-www.star.le.ac.uk/Catalogue/3XMM-DR4/UserGuide_xmmcat.html#OptSSPExtr).

Spectra_Flag
This flag is set to T(rue) to indicate that the source has a spectrum made in at least one exposure (see Sec. 3.6 of the UG at http://xmmssc-www.star.le.ac.uk/Catalogue/3XMM-DR4/UserGuide_xmmcat.html#OptSSPExtr).

EP_Chi2prob
The chi2 probability (based on the null hypothesis) that the source, as detected by any of the cameras, is constant. The minimum value of the available camera probabilities (PN_CHI2PROB, M1_CHI2PROB, M2_CHI2PROB) is given.

PN_Chi2prob
The chi2 probability (based on the null hypothesis) that the source as detected by the PN camera is constant. The Pearson's approximation to chi2 for Poissonian data was used, in which the model is used as the estimator of its own variance (see the documentation of ekstest for a more detailed description). If more than one exposure (that is, time series) is available for this source the smallest value of probability was used. See Sec. 3.1.4 of the 2XMM UG at http://xmmssc-www.star.le.ac.uk/Catalogue/2XMM/UserGuide_xmmcat.html#ProcSsp for more details but note also changes described in 3XMM UG at http://xmmssc-www.star.le.ac.uk/Catalogue/3XMM-DR4/UserGuide_xmmcat.html#OptSSPExtr.

M1_Chi2prob
The chi2 probability (based on the null hypothesis) that the source as detected by the M1 camera is constant. The Pearson's approximation to chi2 for Poissonian data was used, in which the model is used as the estimator of its own variance (see the documentation of ekstest for a more detailed description). If more than one exposure (that is, time series) is available for this source the smallest value of probability was used. See Sec. 3.1.4 of the 2XMM UG at http://xmmssc-www.star.le.ac.uk/Catalogue/2XMM/UserGuide_xmmcat.html#ProcSsp for more details but note also changes described in 3XMM UG at http://xmmssc-www.star.le.ac.uk/Catalogue/3XMM-DR4/UserGuide_xmmcat.html#OptSSPExtr.

M2_Chi2prob
The chi2 probability (based on the null hypothesis) that the source as detected by the M2 camera is constant. The Pearson's approximation to chi2 for Poissonian data was used, in which the model is used as the estimator of its own variance (see the documentation of ekstest for a more detailed description). If more than one exposure (that is, time series) is available for this source the smallest value of probability was used. See Sec. 3.1.4 of the 2XMM UG at http://xmmssc-www.star.le.ac.uk/Catalogue/2XMM/UserGuide_xmmcat.html#ProcSsp for more details but note also changes described in 3XMM UG at http://xmmssc-www.star.le.ac.uk/Catalogue/3XMM-DR4/UserGuide_xmmcat.html#OptSSPExtr.

PN_Fvar
The fractional excess variance measured in the PN timeseries of the detection. Where multiple PN exposures exist, it is for the one giving the largest probability of variability (PN_CHI2PROB). This quantity provides a measure of the amplitude of variability in the timeseries, above purely statistical fluctuations. See Sec. 3.9 of the 3XMM UG at http://xmmssc-www.star.le.ac.uk/Catalogue/3XMM-DR4/UserGuide_xmmcat.html#Fvar. This parameter was first introduced in 3XMM-DR4.

PN_Fvar_Error
The error on the fractional excess variance for the PN timeseries of the detection (PN_FVAR). See Sec. 3.9 of the 3XMM UG at http://xmmssc-www.star.le.ac.uk/Catalogue/3XMM-DR4/UserGuide_xmmcat.html#Fvar. This parameter was first introduced in 3XMM-DR4.

M1_Fvar
The fractional excess variance measured in the MOS1 timeseries of the detection. Where multiple MOS1 exposures exist, it is for the one giving the largest probability of variability (M1_CHI2PROB). This quantity provides a measure of the amplitude of variability in the timeseries, above purely statistical fluctuations. See Sec. 3.9 of the 3XMM UG at http://xmmssc-www.star.le.ac.uk/Catalogue/3XMM-DR4/UserGuide_xmmcat.html#Fvar. This parameter was first introduced in 3XMM-DR4.

M1_Fvar_Error
The error on the fractional excess variance for the MOS1 timeseries of the detection (M1_FVAR). See Sec. 3.9 of the 3XMM UG at http://xmmssc-www.star.le.ac.uk/Catalogue/3XMM-DR4/UserGuide_xmmcat.html#Fvar. This parameter was first introduced in 3XMM-DR4.

M2_Fvar
The fractional excess variance measured in the MOS2 timeseries of the detection. Where multiple MOS2 exposures exist, it is for the one giving the largest probability of variability (M2_CHI2PROB). This quantity provides a measure of the amplitude of variability in the timeseries, above purely statistical fluctuations. See Sec. 3.9 of the 3XMM UG at http://xmmssc-www.star.le.ac.uk/Catalogue/3XMM-DR4/UserGuide_xmmcat.html#Fvar. This parameter was first introduced in 3XMM-DR4.

M2_Fvar_Error
The error on the fractional excess variance for the MOS2 timeseries of the detection (M2_FVAR). See Sec. 3.9 of the 3XMM UG at http://xmmssc-www.star.le.ac.uk/Catalogue/3XMM-DR4/UserGuide_xmmcat.html#Fvar. This parameter was first introduced in 3XMM-DR4.

Var_Flag
This flag is set to T(rue) if the source was detected as variable (chi2 probability < 1E-5, see PN_CHI2PROB, M1_CHI2PROB, M2_CHI2PROB) in at least one exposure, to F(alse) if the source was tested for variability but did not qualify as such, or to N(ull) or U(ndefined) if there was no timeseries file for the given detection or insufficient points were left in the timeseries after applying background flare GTIs,. See Sec. 3.2.8 of the 2XMM UG at http://xmmssc-www.star.le.ac.uk/Catalogue/2XMM/UserGuide_xmmcat.html#CatVarFlag.

Var_Exp_ID
If the source is detected as variable (that is, if VAR_FLAG is set to T(rue)), the exposure ID ('S' or 'U' followed by a three-digit number) of the exposure with the smallest chi2 probability is given here.

Var_Inst_ID
If the source is detected as variable (that is, if VAR_FLAG is set to T(rue)), the instrument ID (PN, M1, M2) of the exposure given in VAR_EXP_ID is listed here.

SC_RA
The mean Right Ascension in the selected equinox of all detections of the source SRCID, weighted by the positional errors POSERR (called error_radius in this table) values. This was given in J2000.0 decimal degrees in the original table.

SC_Dec
The mean Declination in the selected equinox of all detections of the source SRCID, weighted by the positional errors POSERR (called error_radius in this table) values. This was given in J2000.0 decimal degrees in the original table.

SC_Poserr
The error of the weighted mean position given in SC_RA and SC_DEC, in arcseconds (see 2XMM UG, Sec. 3.2.4 at http://xmmssc-www.star.le.ac.uk/Catalogue/2XMM/UserGuide_xmmcat.html#CatComb for details).

SC_Det_ML
The total band detection likelihood of the source SRCID, i.e., the maximum of the likelihoods of all detections of this source (EP_8_DET_ML).

SC_EP_1_Flux
The mean band 1 flux (0.2 - 0.5 keV) of all the detections of the source SRCID (see EP_1_FLUX) weighted by the errors (EP_1_FLUX_ERROR), in erg/cm2/s.

SC_EP_1_Flux_Error
The error in the weighted mean band 1 flux, in erg/cm2/s (see 2XMM UG, Sec. 3.2.4 at http://xmmssc-www.star.le.ac.uk/Catalogue/2XMM/UserGuide_xmmcat.html#CatComb for details).

SC_EP_2_Flux
The mean band 2 flux (0.5 - 1.0 keV) of all the detections of the source SRCID (see EP_2_FLUX) weighted by the errors (EP_2_FLUX_ERROR), in erg/cm2/s.

SC_EP_2_Flux_Error
The error in the weighted mean band 2 flux, in erg/cm2/s (see 2XMM UG, Sec. 3.2.4 at http://xmmssc-www.star.le.ac.uk/Catalogue/2XMM/UserGuide_xmmcat.html#CatComb for details).

SC_EP_3_Flux
The mean band 3 flux (1.0 - 2.0 keV) of all the detections of the source SRCID (see EP_3_FLUX) weighted by the errors (EP_3_FLUX_ERROR), in erg/cm2/s.

SC_EP_3_Flux_Error
The error in the weighted mean band 3 flux, in erg/cm2/s (see 2XMM UG, Sec. 3.2.4 at http://xmmssc-www.star.le.ac.uk/Catalogue/2XMM/UserGuide_xmmcat.html#CatComb for details).

SC_EP_4_Flux
The mean band 4 flux (2.0 - 4.5 keV) of all the detections of the source SRCID (see EP_4_FLUX) weighted by the errors (EP_4_FLUX_ERROR), in erg/cm2/s.

SC_EP_4_Flux_Error
The error in the weighted mean band 4 flux, in erg/cm2/s (see 2XMM UG, Sec. 3.2.4 at http://xmmssc-www.star.le.ac.uk/Catalogue/2XMM/UserGuide_xmmcat.html#CatComb for details).

SC_EP_5_Flux
The mean band 5 flux (4.5 - 12.0 keV) of all the detections of the source SRCID (see EP_5_FLUX) weighted by the errors (EP_5_FLUX_ERROR), in erg/cm2/s.

SC_EP_5_Flux_Error
The error in the weighted mean band 5 flux, in erg/cm2/s (see 2XMM UG, Sec. 3.2.4 at http://xmmssc-www.star.le.ac.uk/Catalogue/2XMM/UserGuide_xmmcat.html#CatComb for details).

SC_EP_8_Flux
The mean combined band flux (0.2 - 12.0 keV) of all the detections of the source SRCID (see EP_1_FLUX) weighted by the errors (EP_8_FLUX_ERROR), in erg/cm2/s.

SC_EP_8_Flux_Error
The error in the weighted mean band 8 flux, in erg/cm2/s (see 2XMM UG, Sec. 3.2.4 at http://xmmssc-www.star.le.ac.uk/Catalogue/2XMM/UserGuide_xmmcat.html#CatComb for details).

SC_EP_9_Flux
The mean band 9 flux (0.5 - 4.5keV) of all the detections of the source SRCID (see EP_9_FLUX) weighted by the errors (EP_9_FLUX_ERROR), in erg/cm2/s.

SC_EP_9_Flux_Error
The error in the weighted mean band 9 flux, in erg/cm2/s (see 2XMM UG, Sec. 3.2.4 at http://xmmssc-www.star.le.ac.uk/Catalogue/2XMM/UserGuide_xmmcat.html#CatComb for details).

SC_HR1
The mean hardness ratio of the bands 1 and 2 of all the detections of the Source SRCID (EP_HR1) weighted by the errors.

SC_HR1_Error
The error in the weighted mean hardness ratio of bands 1 and 2 of all the detections (see 2XMM UG, Sec. 3.2.4 at http://xmmssc-www.star.le.ac.uk/Catalogue/2XMM/UserGuide_xmmcat.html#CatComb for details).

SC_HR2
The mean hardness ratio of the bands 2 and 3 of all the detections of the source SRCID (EP_HR2) weighted by the errors.

SC_HR2_Error
The error in the weighted mean hardness ratio of bands 2 and 3 of all the detections (see 2XMM UG, Sec. 3.2.4 at http://xmmssc-www.star.le.ac.uk/Catalogue/2XMM/UserGuide_xmmcat.html#CatComb for details).

SC_HR3
The mean hardness ratio of the bands 3 and 4 of all the detections of the source SRCID (EP_HR3) weighted by the errors.

SC_HR3_Error
The error in the weighted mean hardness ratio of bands 3 and 4 of all the detections (see 2XMM UG, Sec. 3.2.4 at http://xmmssc-www.star.le.ac.uk/Catalogue/2XMM/UserGuide_xmmcat.html#CatComb for details).

SC_HR4
The mean hardness ratio of the bands 4 and 5 of all the detections of the source SRCID (EP_HR4) weighted by the errors.

SC_HR4_Error
The error in the weighted mean hardness ratio of bands 4 and 5 of all the detections (see 2XMM UG, Sec. 3.2.4 at http://xmmssc-www.star.le.ac.uk/Catalogue/2XMM/UserGuide_xmmcat.html#CatComb for details).

SC_Extent
The total band extent, i.e., the weighted average of the EPIC extents in the total band of all the detections of the source, in arcseconds.

SC_Extent_Error
The 1-sigma error in the total band extent, in arcseconds.

SC_Extent_ML
The total band detection likelihood of the extended source SRCID, i.e., the largest of the extent likelihoods of all detections of this source.

SC_Chi2prob
The chi2 probability (based on the null hypothesis) that the unique source SRCID as detected by any of the observations is constant, that is, the minimum value of the EPIC probabilities in each detection, EP_CHI2PROB, is given.

SC_Fvar
The fractional excess variance of the unique source. It is the value corresponding to the exposure and instrument that shows the lowest probability of being constant (i.e. it is the PN_FVAR, M1_FVAR or M2_FVAR value corresponding to EP_CHI2PROB, SC_CHI2PROB. This parameter was first introduced in 3XMM-DR4.

SC_Fvar_Error
The error on the fractional excess variance of the unique source. It is the value corresponding to the exposure and instrument that shows the lowest probability of being constant (i.e. it is the PN_FVARERR, M1_FVARERR or M2_FVARERR value corresponding to EP_CHI2PROB, SC_CHI2PROB. This parameter was first introduced in 3XMM-DR4.

SC_Var_Flag
The variability flag for the unique source SRCID which is set to the value of VAR_FLAG for the most variable detection of this source. Note that where a timeseries is not available or insufficient points are left in the timeseries after applying background flare GTIs, the value is set to NULL or U(ndefined).

SC_Sum_Flag
The summary flag for the unique source SRCID is taken to be the worst flag of all detections of this source (SUM_FLAG).

SC_EP_8_Fmin
The minimum EPIC band 8 flux (EP_8_FLUX), in erg/cm2/s, among any of the constituent detections of the unique source. This parameter was first introduced in 3XMM-DR4.

SC_EP_8_Fmin_Error
The error on the minimum EPIC band 8 flux (EP_8_FLUX_ERR), in erg/cm2/s, among any of the constituent detections of the unique source. This parameter was first introduced in 3XMM-DR4.

SC_EP_8_Fmax
The maximum EPIC band 8 flux (EP_8_FLUX), in erg/cm2/s, among any of the constituent detections of the unique source. This parameter was first introduced in 3XMM-DR4.

SC_EP_8_Fmax_Error
The error on the maximum EPIC band 8 flux (EP_8_FLUX_ERR), in erg/cm2/s, among any of the constituent detections of the unique source. This parameter was first introduced in 3XMM-DR4.

Obs_First
The start date of the earliest observation of any constituent detection of the unique source. This parameter was first introduced in 3XMM-DR4.

Obs_Last
The end date of the last observation of any constituent detection of the unique source. This parameter was first introduced in 3XMM-DR4.

N_Detections
The number of detections of the unique source SRCID used to derive the combined values.

Confused_Flag
This flag parameter is normally set to (F)alse, but is set to (T)rue when a given detection has a probability above zero of being associated with two or more distinct sources. The SRCID is that of the match with the highest probability, but there remains some uncertainty about which source is the correct match for the detection.

High_Background_Flag
The flag is set to T(rue) if this detection comes from a field which, during manual screening, was considered to have a high background level which notably impacted on source detection (see Sec. 6.1.2 at http://xmmssc-www.star.le.ac.uk/Catalogue/3XMM-DR4/UserGuide_xmmcat.html#HighBkg). This parameter was first introduced in 3XMM-DR4. It was added to provide information about detections arising in fields with high background levels. However, since 4XMM, thanks to the improved data reduction, the high background is eliminated more efficiently, and this parameter is no longer necessary. It has been retained for consistency with previous releases and all values are currently F(alse).


Contact Person

Questions regarding the XMMSSC database table can be addressed to the HEASARC Help Desk.
Page Author: Browse Software Development Team
Last Modified: Monday, 12-Jun-2023 13:36:22 EDT