| program |
version |
parfile |
status |
remarks |
| spi_scripts |
1.8 |
spi_science_analysis.par |
OK |
installed. The script name is spi_science_analysis. This executable script combines the analysis steps from POIN to IMA
(i.e. calling the programs spipoint, spi_gti_creation,
spidead, spi_gain_corr, spi_psd_optimise, spi_psd_postprocess, spibounds, spihist, spiback, cat_extract, spi_psd_effigen, spi_psd_respgen, spiskymax, spiros). It now also
allows stepping back and re-running parts of the analysis!
spi_science_analsysis can be used with in-flight data, Reference Orbit Test, and E2E-F data. For incomplete data sets use blc_sa. |
| blc_sa |
1.9 |
blc_sa.par |
not working |
installed, not delivered yet. Solves SPR 1995. New parameter file! This executable combines the analysis steps from POIN to IMA
(i.e. calling the programs blc_spipoint, spi_gti_creation,
spidead, spi_gain_corr, spi_psd_optimise, spi_psd_postprocess, spibounds, spihist, spiback, spi_psd_effigen, spi_psd_respgen, spiskymax, spiros). It also
allows stepping back in your
data analysis. |
| spi_toolslib |
2.0.2 |
|
OK |
installed. spi_toolslib 3.0.4 |
| spipoint |
1.7 |
spipoint.par |
OK |
installed. Solves SPRs 2251, 1327, 1768 and probably 1820 and
1821. This tool can be used for in-flight data, Reference Orbit
Test and E2E-F data. For incomplete data sets you might use blc_spipoint. |
| blc_spipoint |
2.2 |
blc_spipoint.par |
OK |
installed. blc_spipoint should work with any kind of data where the HK data for the pointing of the telescope is missing (BLC data, SVT-E, and PLC). |
| spi_gti_creation |
1.9 |
spi_gti_creation.par |
OK |
Installed. Solves SPR 2673 and SCREW 1217. |
| spigti |
3.3 |
spigti.par |
OK |
installed. This program only works inside
spi_gti_creation. Takes into account SPR 1233, 3027 and SCREW 1086 and 954 (handles the on
board spectra). Needs update due to SPR 2693, SPR 1816 and SCREW 705 |
| spi_allgti |
1.0 |
spi_allgti.par |
OK |
installed. This defines all times in a pointing as 'good time'. |
| spidead |
2.3 |
spidead.par |
OK |
installed. Solves SPR 1233. This version takes into
account either the real dead times which are written in the scientific
housekeeping OR (when you set the parameter deadtimecorrection to
a value> 0.0) uses a user defined dead time correction
(e.g. 0.88) to speed up the process OR set deadtimecorrection
to -1 (recommended!) to use only one detector for the dead time determination. Use a
chatter level < 20 if you want to avoid a lot of logbook comments! |
| spi_gain_corr |
1.4.1 |
spi_gain_corr.par |
OK |
installed. New parameter file. See Jürgen Knödlseder's s/w page for documentation. |
| spi_psd_optimise |
2.0.1 |
spi_psd_optimise.par |
OK |
installed. New parameter file! See Jürgen Knödlseder's s/w page for documentation. |
| spi_psd_postprocess |
1.3.1 |
spi_psd_postprocess.par |
OK |
installed. See Jürgen Knödlseder's s/w page for documentation. |
| spicommon |
1.8 |
|
OK |
installed. Handles the on board spectra |
| spibounds |
1.2 |
spibounds.par |
OK |
installed. Solves SPR 2940. |
| spihist |
3.1.2 |
spihist.par |
OK |
installed. New parameter file. Solves SPR 3140,
SPR 3039 and SPR 3027. Read the spihist user guide.
|
| spiback |
6.0 |
spiback.par |
OK |
installed. Solves SPR 3038. Now
DFEE option should work (ACS/IREM only when running spi_gti_creation
with 'DATA_GAPS' option)! Does not depend on spibham anymore. New parameter file! |
| spi_obs_back |
2.0.1 |
spi_obs_back.par |
OK |
installed. This is an alternative program
to spiback. For more information look at Jürgen Knödlseder's s/w page |
| spi_psd_effigen |
1.1.1 |
spi_psd_effigen.par |
OK |
installed. New parameter file. See Jürgen Knödlseder's s/w page for documentation. |
| spi_psd_respgen |
2.0.1 |
spi_psd_respgen.par |
OK |
installed. See Jürgen Knödlseder's s/w page for documentation. |
| spibham |
6.0 |
|
OK |
installed, not delivered yet. Solves SPR 1233 and SPR 2990 |
| spiros |
6.0.1 |
spiros.par |
OK |
installed, not delivered yet. New parameter file!. Please read the spiros user manual and
cookbook. There is also a very useful spiros tips and tricks page |
| spiskymax |
29.1 |
spiskymax.par |
OK |
installed. Please read the spiskymax user manual. |
| spidiffit |
3.0 |
spidiffit.par |
OK |
installed. This program performs diffuse model fitting to SPI data. Please read the spidiffit user manual. |
| spiarf |
1.5 |
spiarf.par |
OK |
Installed. |
| spirmf |
1.5 |
spirmf.par |
OK |
Installed. |
| spi_displays |
1.2 |
spi_spectral_display.par
spi_dsp_display.par |
OK |
Installed. To display the spiros output spectra use
spi_spectral_display, for detector spectra produced by spihist,
use spi_dsp_display. |
| program |
version |
parfile |
status |
remarks |
| iosm_spi |
1.0 |
|
OK |
installed at ISDC. Standard IOSM displays for the operation. Requires IOSM 10.0 or higher. |
| spioffback |
2.0 |
spioffback.par |
OK |
installed locally. Creating a SPI.-BMOD-DSP file from an empty field observation. |
| spiaddobs |
6.0 |
spiaddobs.par |
OK |
installed locally. |
| spidisplay |
2.0 |
spidisplay.par |
not tested yet |
installed. This tool shows you the detector spectra for up to
19 science windows (graphic display). |
| spisumhist |
2.1 |
spisumhist.par |
OK |
installed. Solves SPR 2037 and 2346 |
| spiobs |
3.8 |
|
expert use only |
Not installed at GSFC. Needs spibham 3.8. This is a tool
to have a look on the detector spectra, counts per bin etc. |
| blc_spitime |
1.2 |
|
not foreseen for delivery |
small program to convert times during the BLC calibration
from dezimal days (e.g. TSTART and TSTOP) to real date and time. This is not under
configuration managemen. |
| spiaccess |
1.0 |
spiaccess.par |
not foreseen for delivery |
not installed. Small program to read the PSD_RAWFLAGS of an observation
group. |