next up previous contents
Next: Appendix B Statistics in XSPEC Up: Appendices Previous: Appendices

The User Interface


All communication with the user in XSPEC is performed through the tcl user interface. When XSPEC starts, a tcl interpreter is initialized, and the XSPEC commands are added to it so that the tcl interpreter understands them. The XSPEC commands, which are C++ functions, define the syntax through a new built-in library of utility functions. The parser used in earlier versions of XSPEC has been discontinued: however the syntax understood by XSPEC12 is much the same as before.

XSPEC and tcl/tk

Because tcl is a full scripting language, users can write complex scripts with loops, branching, etc., which utilize XSPEC commands.  Here we describe how to use those features of tcl necessary to give the user similar functionality to that available in previous versions of XSPEC, and to give information on the details of our tcl implementation that may be useful to experienced tcl users.  For a  description of  tcl, see, for example, Practical Programming in Tcl and Tk, B. Welch, (1997, Prentice Hall).

Tk, tcl's companion graphical user interface (GUI) toolkit, is also loaded by XSPEC on startup. It is planned that future versions of XSPEC will provide an optional GUI side-by-side with the command line interface (CLI). Although XSPEC does not currently use tk, its presence allows users to write XSPEC scripts with graphical interfaces using Tk commands.

A note on command processing

To emulate the performance of the former XSPEC parser, the command functions are programmed to react similarly to some of its features.

The # sign is used for comments in tcl, but may appear only at the beginning of a command.  tcl and XSPEC both ignore carriage returns on a new line, but XSPEC also ignores the skip character ’/’. The character sequence  ’/*’ entered during a command exits that command, sets any responses to the default response, and returns the user to the prompt. The ’\’ character is used in tcl for continuing a command onto the next line. 

Additionally, note that in tcl, commands and their arguments are delimited by white space. They are terminated by a newline or semicolon, unless there is an open set of parentheses ’{ }’ constituting a loop or test structure. In other words, in tcl the following starts a loop:

while { condition } {





while { condition }





is incorrect, since in the latter case the while command terminates at the end of the first line.

Command Recall/Editing

The XSPEC/tcl interface also uses gnu readline for command input, which allows command line editing and interactive command recall.  On most systems, the left and right arrow keys and the backspace/delete key can be used to navigate and edit the command line.  The up and down arrow keys can be used to step thru the command history list.  Gnu readline is highly customizable, and many more editing/recall functions are available.  Readline documentation can be generated in either postscript or html format from the files in the xanadu/readline/doc directory distributed with the source.

The default implementation of tcl also supports a C-shell like command recall mechanism.  The history command gives a numbered list of the most recently entered commands.  Any command in the list can be re-executed by entering !n, where n is the number of the command in the history list.  The previous command can be re-executed by entering !!.  The most recent command that begins with a string can be re-executed by entering !prefix, where prefix is the string the command begins with.

Note that command recall is implemented using the tcl unknown procedure, part of which is a script file loaded by tcl at run time.  See the section on the unknown command for more details on how it is implemented in XSPEC.


The log command can be used to open a log file to which all input and and output to tcl will be written.  Reading these log files can potentially be confusing when logging tcl flow control commands such as while or for.  This is because tcl treats the body of these commands as an argument of the command.  Thus when the command is echoed to the log file, the entire body of the command is echoed with it.

In order to make this situation less confusing, before commands are echoed to the command file, all newline characters are replaced by semicolons, and the resulting command line is trucated to 80 characters. Then any commands executed with in the body of a flow control command are echoed as they are executed.

Consider the following sequence of tcl commands within XSPEC:

 XSPEC12> log

 Logging to file: xspec.log

 XSPEC12> set i 1 ; set product 1


 XSPEC12> while {$i <= 5} {

 XSPEC12> set product [expr $product * $i]

 XSPEC12> incr i

 XSPEC12> }

 XSPEC12> set product




This would produce the following output in the file xspec.log:

Logging to file: xspec.log

 XSPEC12> set i 1

 set product 1


 XSPEC12> while {$i <= 5} {;set product [expr $product * $i];incr i;}

   expr $product * $i

  set product [expr $product * $i]

  incr i

   expr $product * $i

  set product [expr $product * $i]

  incr i

   expr $product * $i

  set product [expr $product * $i]

  incr i

   expr $product * $i

  set product [expr $product * $i]

  incr i

   expr $product * $i

  set product [expr $product * $i]

  incr i

 XSPEC12> set product



Command Completion

tcl attempts to match the name of any entered command as an abbreviation of a valid command (either a tcl or XSPEC command).  If the entered command matches more than one valid command, tcl then lists the possible choices, but does not execute the command.   For XSPEC commands, aliases have been constructed matching the command to its minimum abbreviation, as listed when typing `?' at the XSPEC prompt (see under Aliases).

For example, the minimum abbreviation for the `plot' command is `pl'.  Thus, typing `pl' will execute the plot command, even though this would otherwise be ambiguous with the tk command `place'.  Command completion is also implemented using the tcl unknown procedure, part of which is a script file loaded by tcl at run time, and may be different or not exist on your system.  See the section in this help file on the unknown command for more details on how it is implemented in XSPEC.

N.B. tcl explicitly switches off command completion for scripts. Because of the way scripts are implemented in XSPEC, however, command abbreviations nevertheless do work in scripts entered with the @ command, but not when entered from the command line or using the source command. See below for more details about tcl scripting.

Unknown Procedure

tcl provides a facility whereby if it cannot match an entered command to its list of known commands, it calls the  unknown procedure, with the unmatched command (along with its arguments) as its argument.  The version of init.tcl distributed with tcl contains a version of the unknown procedure.  When tcl initializes, it looks in several standard places for a script file named init.tcl, which it executes if found. The  unknown procedure is where tcl does command completion and automatic shell command execution.

At start up time, XSPEC loads its own unknown procedure, , which it uses to intercept script processing requests of the form


and renames the previously defined unknown procedure to tclunknown. If XSPEC is not doing any special processing, it simply passes any unmatched commands on to tclunknown, which then processes them as usual. XSPEC has its own special version of the unknown procedure

These factors need to be taken into consideration for programmers writing tcl scripts for use within XSPEC.  For example, if after initialization, users wishing to load a different version of the standard tcl unknown procedure should name that procedure tclunknown, rather than  unknown.


Command name aliases can be constructed using the tcl interp command:


interp alias {} <command_alias> {} <xspec_command>


where <xspec_command> is the name of the command you wish to make an alias for, and <command_alias> is the name of the alias you wish to  set for the command.  The {} are required syntax.

To delete the alias  <command_alias>, simply nullify it with:

interp alias {} <command_alias> {}


Initialization Script

When running interactively, the user has the option of providing an initialization script, which will be executed after XSPEC completes its startup procedure, ie. just before it begins prompting for commands.  The file should be named xspec.rc and located in the directory $HOME/.xspec.  If one runs XSPEC in batch mode, by specifying a script on the command line, this initialization script is not executed.

When multiple users are accessing a single system-wide XSPEC build, the installer can also provide additional initialization that will apply to all users.  See the section “XSPEC Overview and Helpful Hints: Customizing XSPEC” for more details.

XSPEC Command Result

After being executed, many tcl commands return a result string, which is echoed to the terminal when the command is entered on the command line.  When writing complex tcl scripts, this result can be stored and/or used as a test in loops, etc.  When XSPEC commands are executed, they write information to the terminal by writing directly to the appropriate output channel.  However, when running interactively, the tcl result string is also written to the terminal after the command is executed. The tclout command (see command description) creates tcl variables from xspec’s calculations.

Script Files

XSPEC/tcl script files can be executed in three different ways, as follows:


xspec - <script>

executing script on initialization

XSPEC12>@ <script>

executing script from within the program

XSPEC12>source tclscript

use tcl's source command from within the program.

Each of these usages does something slightly different.  In the first form, XSPEC will execute a file called <script>. One may execute a series of script files at startup with the following command syntax:

unix> xspec - file1 file2 file3 ...

Note that the space following the is required.

The second form is @<name>, where <name> is the name of the script file to be executed.  Here the default extension of .xcm is assumed. Scripts containing valid tcl or XSPEC commands will be executed using this form, and (unless the script ends in quit or exit) will return to the interactive prompt after completion.

The final form, using tcl's source command, is intended for the special case where the script contains the implementation of a new command written in tcl/tk. See the section on writing custom commands for more details. In current tcl versions it compiles the script into bytecode representation for more efficient execution, and adds any procedures defined in the script to the set of commands understood by the interpreter. It will not work for general scripts containing XSPEC/tcl commands, for example those produced by XSPEC's save command. These should rather be executed using the @ form.

Note that only in the second case @ is there a default filename suffix (i.e. .xcm) for both the other methods of script execution the filename must be given in full.

tcl  internally switches off the mechanism that expands command abbreviations when scripts are executed. If this were not done, the user could specify command abbreviations that change the behavior of the tcl command set (e.g. set  for the setplot  command would redefine tcl’s command for setting variables). This behavior can be overridden with the statement

set tcl_interactive 1

near the beginning of the script, but it is not recommended to do so. Instead, we strongly recommend spelling out command names in full within XSPEC scripts.

Command Echoing

By default, when XSPEC is executing a script file, it echoes each command to the terminal before it is executed. This can be controlled using the tcl variable xs_echo_script, whose default value is 1. If this variable is set to 0, the commands from the script file will not be echoed to the terminal.


In summary, we suggest the following convention:


that implement the commands addline and modid. These also show how to make commands self-documenting.

Unix Shell Commands

Shell commands can be executed within XSPEC using the exec command (see the help entry on the exec command).  When running interactively, if tcl cannot find a command that matches that entered on the command line, it will search for a shell command that matches the entered command.  If it finds a match, it automatically executes the shell command via exec.  Note that this feature is implemented using the tcl unknown procedure, part of which is a script file loaded by tcl at run time, and may be different or not exist on your system.  See the section in this help file on the unknown command for more details on how it is implemented in XSPEC.

Note that the tcl exec command executes the given command directly, without first passing it on to the shell.  Thus no globbing (ie. expansion of wildcards such *.pha) is performed. If you wish to pass you command through a shell for wildcard expansion, etc, use the syscall command.

If you want to start a subshell from within XSPEC, simple type the command for starting that shell, ie. type


in order to start a C-shell.  Note that typing

XSPEC12>exec csh

will not work properly.

Giving the


command with no arguments will start a subshell using your current shell (csh, tcsh, bash, sh, etc).


Writing Custom XSPEC commands

XSPEC commands can be written by users as tcl procedures, which have similarities with fortran subroutines. Within XSPEC, tcl procedures can take arguments and execute XSPEC and tcl commands. The syntax for specifying arguments to a tcl procedure is as follows:

proc my_proc {arg1 arg2}{



data 1:1 ${arg1}_s0_20

data 2:2 ${arg2}_s1_20



Here, arg1, arg2 are values supplied by the user (here, part of a filename) from the command line, and substituted wherever ${arg1}, ${arg2} appear within the script. One may also give  an argument a default value, so that the command so created may be invoked even without needing to specify the argument:


proc my_proc {arg1    {arg2 file2} }  {



Note that the parentheses enclosing both ${arg2} and file2 in this expression distinguish this from the case where 3 arguments are required for my_proc. Once this file is created, it needs to be source'd once, which compiles the script into an internal bytecode representation (this is similar to the way Java operates). Alternatively, one may place it in the user script directory and create an index in that directory, after which case it will be found automatically and compiled the first time it is invoked.

The user script directory is given by the line


in the Xspec.init file that is copied into $HOME/.xspec when the user starts xspec12 for the first time (the supplied default value for this directory is the $HOME/.xspec directory itself). After the script is placed there, perform the following command



XSPEC12>auto_mkindex .


This will instruct XSPEC to build an index of scripts to be loaded on xspec startup.

On the next invocation of XSPEC, the script will be sourced on startup and will appear in the list of commands XSPEC understands.

The my_proc procedure is then defined such  that one may  type:

XSPEC12>my_proc eso103 eso104

and the data statement in the above example will be executed as if the following had been entered:

data 1:1 eso103_s0_20

data 2:2 eso104_s1_20

The tcl info command can be used to show which procedures have been defined:


XSPEC12>info commands <procedure name>

This will return <procedure name> if that procedure has been compiled (source’d) already or  is a built-in command, or nothing if it has not (yet) been invoked or defined.

Scripting commands that prompt the user

The commands model, editmod, addmod, newpar, and fakeit may prompt the user for more information when used interactively.  In order to write scripts that use these commands, one must know how to  force XSPEC to enter the information that would be prompted for. The technique is  exemplified as follows. Suppose we defined a procedure xmodel that makes a model with certain predefined parameter values:

set p1  {1.5 0.001 0 0 1.E05 1.E06}

set p2  {1 0.001 0 0 1.E05 1.E06}

 proc xmodel {modelString param1 param2 args} {




  model $modelString & $param1 & param2 & /*




Here the “&” character is taken by XSPEC as a carriage return, delimiting the model string and parameter arguments into separate input lines.

The procedure xmodel may be compiled with the command

XSPEC12> source xmodel.tcl

This creates xmodel as a command with two arguments which sets subsequent parameters to their default values. It can be invoked e.g. by

XSPEC12>xmodel {wa(po + peg)} $p1 $p2

Note that  the model string, which contains spaces, needs to be entered in  {} or double quotes. Note also that tcl understands a single string argument, args, as in

proc  tclscript { args } {


to mean a variable number of arguments to a procedure (it is supplied as a tcl list, which can be split within the procedure into separate strings for digestion by xspec if present).

Script Example

In the directory $HEADAS/../spectral/session is a script file called tclex.xcm.  This script gives an example of how one might use the power of tcl's scripting language in an XSPEC session. This script should be executed with


XSPEC12> @tclex


# This script gives an example of how one might use the power of tcl's

# scripting language in an XSPEC session.  In this example, XSPEC loops

# thru 3 data files (file1, file2 and file3) and fits them each to the

# same model `wabs(po+ga)'.  After the fit the value of parameter 4 (the

# line energy for the gaussian) for each data set is saved to a file.


# Keep going until fit converges.

query yes


# Open the file to put the results in.

set fileid [open fit_result.dat w]


for {set i 1} {$i < 4} {incr i} {


# Set up the model.

  model wabs(po+ga) & /*


# Get the file.

  data file$i


# Fit it to the model.



# Get the values specified for parameter 4.

  tclout param 4

  set par4 [string trim $xspec_tclout]


# Turn it into a Tcl list.

  regsub -all { +} $par4 { } cpar4

  set lpar4 [split $cpar4]


# Print out the result to the file.  Parameter value is

# the 0th element of the list `lpar4'.

  puts $fileid "$i [lindex $lpar4 0]"




# Close the file.

close $fileid

The user is encouraged to read the voluminous on-line documentation and literature available about tcl in order to benefit fully its flexible command processing, graphical interfacing, and scripting capabilities. See for much more information and extensive bibliography.


next up previous contents
Next: Appendix B Statistics in XSPEC Up: Appendices Previous: Appendices