[Date Prev][Date Next][Thread Prev][Thread Next][Search] [Main Index] [Thread Index] [HEASARC Mailing List Archives]

GSFC XMM-Newton GOF Status Report #096: XMM-NEWTON NEWS #43



_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/
_/                                                                          
_/
_/                 XMM-NEWTON NEWS #43   ---    01-Dec-2004                 
_/
_/                                                                          
_/
_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/

                   XMM-Newton Science Operations Centre at
                    ESA's European Space Astronomy Centre,
                 P.O. Box - Apdo. 50727, 28080 Madrid, Spain

_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/

SOC Home Page:
        http://xmm.vilspa.esa.es/
Helpdesk web interface:
        http://xmm.vilspa.esa.es/external/xmm_user_support/helpdesk.shtml
Helpdesk email address:
        xmmhelp@xmm.vilspa.esa.es
News Mailing List:
        http://xmm.vilspa.esa.es/external/xmm_user_support/xmm_news/

_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/

Contents:
        - Version 6.1.0 of the Science Analysis System (SAS) released
        - Data processing facilities in the XMM-Newton Science Archive (XSA)
        - Changes to the Observation Data Files (ODF)
        - XMM-Newton EPIC background products updated


Version 6.1.0 of the Science Analysis System (SAS) released
===========================================================

http://xmm.vilspa.esa.es/external/xmm_sw_cal/sas_frame.shtml

The main improvements in this release can be summarized as follows:

General
-------
* The main changes introduced in this version with respect to SAS 6.0.0 are:

- an RGS background modelling capability. This is explained further below in
  the RGS section of this note,
- an upgrade of the OM grism data analysis, explained further below in the
  OM section,
- a new, experimental treatment of Time Correlation is included in SAS 6.1.
  The new treatment corrects known problems with existing time correlation
  data using Reconstructed Time Correlation (TCX) data. It should be noted
  that the validation of the TCX files in the ODF (see below) and their use
  in the SAS is still being validated and as such, experimental.

All other changes to SAS were either bug fixing or better handling of
calibration algorithms.

In addition, a small change has been introduced in the startup command files
sas-setup.(c)sh: the internal save directory $HOME/.sas.d is no longer part
of the SAS_PATH environment variable. This should avoid the problem of users
getting pre-established selection choices without knowing it, because of
saved parameters in former SAS sessions. A SAS user who wants to use a saved
configuration (see SAS GUI documentation) has now to consciously add this
directory to the SAS_PATH.

EPIC:
-----
MOS specific:
-------------
- epatplot calculations corrected
- correct response calculations for imaging mode data in Timing Mode
  observations

PN specific:
------------
- redistribution function upgraded (especially at low energies), in better
  agreement with results from ground calibration
- added Extended Full Frame mode tuning function for CTI correction

RGS:
----
An alternative method for determining the background spectrum has been
implemented, based on RGS background templates obtained from empty-field
observations. The whole method is described in XMM-SOC-CAL-TN-0058
"Templates for the RGS Background", by R. Gonzalez-Riestra. The technical
note includes test results of the new method, which is especially important
for the analysis of extended sources.

OM:
---
OM grism data processing has changed substantially. The output products have
been simplified, making them more usable and understandable.

CCF:
----
Please notice that a number of new calibration constituent files (CCFs) have
been released together with SAS 6.1.0, which are necessary for running some
of the tasks. You can follow the CCF download instructions at

http://xmm.vilspa.esa.es/external/xmm_sw_cal/calib/ccf.shtml


Data processing facilities in the XMM-Newton Science Archive (XSA)
==================================================================

As of XSA v2.7, released at the beginning of November 2004, a full suite of
data processing facilities can be triggered from the XSA user interface:

- reprocessing of raw telemetry (ODF) data for all XMM-Newton cameras through
  the latest public SAS data reduction meta-tasks ("emproc", "epproc",
  "rgsproc", "omichain", "omfchain"). After completion of processing, output
  products are stored in an ftp area for retrieval, together with the
  Calibration Index File and the ODF summary file generated by the reduction.

- filtering of EPIC calibrated and concatenated event lists prior to
  retrieval, according to standard "selectlib" expressions
  (cf. http://xmm.vilspa.esa.es/sas/current/doc/selectlib/ )

- interactive extraction of spectra and light curves from sky regions defined
  on EPIC exposure images in the XSA FITS viewer tool. Response matrices are
  generated together with spectral products. Again, data can be screened upon
  scientific products accumulation using data selection expressions such as
  in "xmm/evselect" or "especget". Output files are stored in an ftp area for
  retrieval after completion of processing.

- the same interface allows users to interactively generate a full
  field-of-view EPIC time series.

- filtering on high particle-background intervals can be applied to the
  interactive generation of EPIC spectra, or the screening of an event list.
  The filtering is applied by generating Good Time Intervals from the
  single-events, 10-s time-binned field-of-view, light curve. The minimum
  energy of the light curve (nominally 10 keV) and the count rate threshold
  applied (nominally 0.35 cts/s and 1.0 cts/s for the MOS and the pn,
  respectively) are customizable by the user.

These facilities are intended to complement the high-level (PPS) scientific
products generated by the Survey Science Centre for all XMM-Newton
observations, and the 1XMM Catalog of EPIC Serendipitous Sources. Both these
resources are stored within the XSA, and can be browsed through its user
interface on a large number of querying parameters.

Users are strongly encouraged to use these facilities. Opinions on these new
functionalities, as well as suggestions as to how they could be improved are
welcome, and should be conveyed, as usual, through the XMM-Newton Helpdesk.

Finally, we recall that users can now monitor the status of their shopping
basket download or data processing requests through a "Request Monitor" tool,
which can be launched via a button in the top panel of the XSA user 
interface.

A short "guided tour" of the XSA is available at the following URL:

http://xmm.vilspa.esa.es/external/xmm_data_acc/xsa/docs/tour.shtml

... together with a list of "how-to" Frequently Asked Questions:

http://xmm.vilspa.esa.es/external/xmm_data_acc/xsa/docs/xsa_faq_usage.shtml


Changes to the Observation Data Files (ODF)
===========================================

The XMM-Newton SOC is currently re-finalizing and checking all produced ODFs
preparatory to systematic regeneration of all pipeline products using the
latest SAS capabilities.

This process started on 15th May 2004 and consists of:

- Updating the Attitude data in an existing ODF with the latest re-generated
  Attitude information (always updated).
- Adding the Raw Attitude File (RAF) to existing ODFs (always added).
- Adding the corrected Time Correlation information (TCX) to existing ODFs
  (always added).
- Adding RGS offset files to existing ODFs (optionally added).
- Adding PN offset data image files to existing ODFs (added when available).
- Checking the Data Quality (ODF check) of the re-finalized and new ODFs.

The additional files are described in the latest version of the XMM-Newton
Data Files Handbook, which is available at:

http://xmm.vilspa.esa.es/external/xmm_user_support/documentation/

Further, and after the addition of the above information, each re-finalized
or newly produced ODF is being passed at the SOC through a Data Quality
checking process (ODF-check). This process extracts information about the ODF
that may occasionally lead to special handling of problem ODFs prior to their
delivery to SSC for Pipeline generation. This quality information will be
made available to XSA users.

So far, existing ODFs from revolutions in the range 385 to 710 have gone
through the re-finalization and ODF-check processes. ODFs for revolutions 800
and up have been similarly processed. Please, be aware that PN offset dumps
have been added (when available) to ODFs taken before revolution 832. From
revolution 833 onwards the PN offset dumps are already part of the
Observation.

To recognize whether an ODF has gone through the add-on and Quality Check
processes you may check the files listed in the SUM.ASC ODF constituent. The
presence of a file named ...RAS.ASC will be the confirmation that the ODF has
gone through both processes.


XMM-Newton EPIC background products updated
===========================================

Recent additions have been made to the XMM-Newton EPIC background products at
Birmingham University - XMM-Newton background events files for the 3 EPIC
instruments in their different instrument mode/filter combinations have been
constructed using a superposition of many pointed observations. These
'template Background' files are especially useful in the analysis of large or
extended sources, and can be found at:

http://www.sr.bham.ac.uk/xmm3/BGproducts.html

together with related software, details about their construction and some
guidance as to their usage. Recent additions include new THICK filter
background event datasets and exposure maps for PN (full frame and extended
full frame), MOS1 and MOS2 (full frame mode).



Yours sincerely,
XMM-Newton SOC
_______________________________________________
XMM-NEWS mailing list
XMM-NEWS@xmm.vilspa.esa.es
http://xmm.vilspa.esa.es/mailman/listinfo/xmm-news

----- End forwarded message -----
--
A service of the XMM-Newton GOF, NASA/GSFC

Please do not reply to this email.
Questions or comments should go to:
http://heasarc.gsfc.nasa.gov/cgi-bin/Feedback