# Processing script configuration.
# Written by Ron Watkins, 13Jun94.
echo "$SH_VER:LO:Set up the processing run configuration" >>job.log

export FRFREAD="/usr/local/frfread/frfread3.00/frfreadng.3.025"
export FTOOLS="/usr/local/ftools/ftools.2.9/bin.host"
export STOOLS="/usr/local/stools/stools.2.2/bin"
export MKFILTERVER="MKF1.23"
export MKFMAKEFRAMEDUMP="/usr/local/isas_software/bin/mkfMakeFrameDump.1.23"
export MKFBINNING="/usr/local/isas_software/bin/mkfBinning.1.23"
export MKFBINNING_P1="-s"
export MKFBINNING_P2="1"
export MKFBINNING_P3="1"
export MKFRECD2FITS="/usr/local/isas_software/bin/mkfRecd2Fits.1.23"
export GAINHISTVER="temp2gain_v3.1"
export GAINHISTDIR="/usr/local/isas_software/bin"
export S0MAP="/aps/calibration/s0_teldef_ascalin.fits"
export S1MAP="/aps/calibration/s1_teldef_ascalin.fits"
export G2ONPOWMAP="/aps/calibration/gis2_ano_on_pow2.fits"
export G2ONFLFMAP="/aps/calibration/gis2_ano_on_flf.fits"
export G3ONPOWMAP="/aps/calibration/gis3_ano_on_pow2.fits"
export G3ONFLFMAP="/aps/calibration/gis3_phnew_tbl_flf.fits"
export G2OFFPOWMAP="/aps/calibration/gis2_ano_off_pow2.fits"
export G2OFFFLFMAP="/aps/calibration/gis2_ano_off_flf.fits"
export G3OFFPOWMAP="/aps/calibration/gis3_ano_off_pow2.fits"
export G3OFFFLFMAP="/aps/calibration/gis3_ano_off_flf.fits"
export RIGID="/aps/calibration/rigidity.data.1.23"
export LEAPTABLE="/aps/calibration/leapsec.dat.1.24"
export G2FGTI_EXPR="/aps/config/G2FGTI_EXPR1.0"
export G3FGTI_EXPR="/aps/config/G3FGTI_EXPR1.0"
export S0_1CCD_EXPR="/aps/config/S0_1CCD_EXPR.1.0"
export S0_2CCD_EXPR="/aps/config/S0_2CCD_EXPR.1.0"
export S0_4CCD_EXPR="/aps/config/S0_4CCD_EXPR.1.0"
export S1_1CCD_EXPR="/aps/config/S1_1CCD_EXPR.1.0"
export S1_2CCD_EXPR="/aps/config/S1_2CCD_EXPR.1.0"
export S1_4CCD_EXPR="/aps/config/S1_4CCD_EXPR.1.0"
export GIS2_REGION256="/aps/config/GIS2_REGION256.1.0"
export GIS3_REGION256="/aps/config/GIS3_REGION256.1.0"
export GIS2_REGION64="/aps/config/GIS2_REGION64.1.0"
export GIS3_REGION64="/aps/config/GIS3_REGION64.1.0"
export GIS_EVENTS_MIN="1000"
export SIS_EVENTS_MIN="10000"
export GIS_GAINHIST_STAGE="/aps/stage/gis_temp2gain"
export SIS_FLK_PIXEL_STAGE="/aps/stage/sis_flk_pixel"
export ISAS_MKF_STAGE="/aps/stage/isas_mkf"
export ATT_LOG_STAGE="/aps/stage/attitude_runs"
export GIS_KEYWORDS="/aps/config/ffilecat.gis.keywords"
export SIS0_KEYWORDS="/aps/config/ffilecat.sis0.keywords"
export SIS1_KEYWORDS="/aps/config/ffilecat.sis1.keywords"

echo "$SH_VER:CO:FRFREAD is $FRFREAD" >>job.log
echo "$SH_VER:CO:FTOOLS are $FTOOLS" >>job.log
echo "$SH_VER:CO:STOOLS are $STOOLS" >>job.log
echo "$SH_VER:CO:ISAS MKFILTERVER is $MKFILTERVER" >>job.log
echo "$SH_VER:CO:ISAS MKFMAKEFRAMEDUMP is $MKFMAKEFRAMEDUMP" >>job.log
echo "$SH_VER:CO:ISAS MKFBINNING is $MKFBINNING" >>job.log
echo "$SH_VER:CO:ISAS MKFBINNING_P1 is $MKFBINNING_P1" >>job.log
echo "$SH_VER:CO:ISAS MKFBINNING_P2 is $MKFBINNING_P2" >>job.log
echo "$SH_VER:CO:ISAS MKFBINNING_P3 is $MKFBINNING_P3" >>job.log
echo "$SH_VER:CO:ISAS MKFRECD2FITS is $MKFRECD2FITS" >>job.log
echo "$SH_VER:CO:RIGID is $RIGID" >>job.log
echo "$SH_VER:CO:LEAPTABLE is $LEAPTABLE" >>job.log
echo "$SH_VER:CO:G2FGTI_EXPR is $G2FGTI_EXPR"  >>job.log
echo "$SH_VER:LO:$G2FGTI_EXPR contents:"  >>job.log
cat $G2FGTI_EXPR >>job.log
echo "$SH_VER:LO:$G2FGTI_EXPR END"  >>job.log
echo "$SH_VER:CO:G3FGTI_EXPR is $G3FGTI_EXPR"  >>job.log
echo "$SH_VER:LO:$G3FGTI_EXPR contents:"  >>job.log
cat $G3FGTI_EXPR >>job.log
echo "$SH_VER:LO:$G3FGTI_EXPR END"  >>job.log
echo "$SH_VER:CO:S0_1CCD_EXPR is $S0_1CCD_EXPR"  >>job.log
echo "$SH_VER:LO:$S0_1CCD_EXPR contents:"  >>job.log
cat $S0_1CCD_EXPR >>job.log
echo "$SH_VER:LO:$S0_1CCD_EXPR END"  >>job.log
echo "$SH_VER:CO:S0_2CCD_EXPR is $S0_2CCD_EXPR"  >>job.log
echo "$SH_VER:LO:$S0_2CCD_EXPR contents:"  >>job.log
cat $S0_2CCD_EXPR >>job.log
echo "$SH_VER:LO:$S0_2CCD_EXPR END"  >>job.log
echo "$SH_VER:CO:S0_4CCD_EXPR is $S0_4CCD_EXPR"  >>job.log
echo "$SH_VER:LO:$S0_4CCD_EXPR contents:"  >>job.log
cat $S0_4CCD_EXPR >>job.log
echo "$SH_VER:LO:$S0_4CCD_EXPR END"  >>job.log
echo "$SH_VER:CO:S1_1CCD_EXPR is $S1_1CCD_EXPR"  >>job.log
echo "$SH_VER:LO:$S1_1CCD_EXPR contents:"  >>job.log
cat $S1_1CCD_EXPR >>job.log
echo "$SH_VER:LO:$S1_1CCD_EXPR END"  >>job.log
echo "$SH_VER:CO:S1_2CCD_EXPR is $S1_2CCD_EXPR"  >>job.log
echo "$SH_VER:LO:$S1_2CCD_EXPR contents:"  >>job.log
cat $S1_2CCD_EXPR >>job.log
echo "$SH_VER:LO:$S1_2CCD_EXPR END"  >>job.log
echo "$SH_VER:CO:S1_4CCD_EXPR is $S1_4CCD_EXPR"  >>job.log
echo "$SH_VER:LO:$S1_4CCD_EXPR contents:"  >>job.log
cat $S1_4CCD_EXPR >>job.log
echo "$SH_VER:LO:$S1_4CCD_EXPR END"  >>job.log
echo "$SH_VER:CO:ISAS GAINHISTVER is $GAINHISTVER" >>job.log
echo "$SH_VER:CO:ISAS GAINHISTDIR is $GAINHISTDIR" >>job.log
echo "$SH_VER:CO:S0MAP is $S0MAP" >>job.log
echo "$SH_VER:CO:S1MAP is $S1MAP" >>job.log
echo "$SH_VER:CO:G2ONPOWMAP is $G2ONPOWMAP" >>job.log
echo "$SH_VER:CO:G2OFFPOWMAP is $G2OFFPOWMAP" >>job.log
echo "$SH_VER:CO:G2ONFLFMAP is $G2ONFLFMAP" >>job.log
echo "$SH_VER:CO:G2OFFFLFMAP is $G2OFFFLFMAP" >>job.log
echo "$SH_VER:CO:G3ONPOWMAP is $G3ONPOWMAP" >>job.log
echo "$SH_VER:CO:G3OFFPOWMAP is $G3OFFPOWMAP" >>job.log
echo "$SH_VER:CO:G3ONFLFMAP is $G3ONFLFMAP" >>job.log
echo "$SH_VER:CO:G3OFFFLFMAP is $G3OFFFLFMAP" >>job.log
echo "$SH_VER:CO:GIS2_REGION64 is $GIS2_REGION64" >>job.log
echo "$SH_VER:LO:$GIS2_REGION64 contents:"  >>job.log
cat $GIS2_REGION64 >>job.log
echo "$SH_VER:LO:$GIS2_REGION64 END"  >>job.log
echo "$SH_VER:CO:GIS3_REGION64 is $GIS3_REGION64" >>job.log
echo "$SH_VER:LO:$GIS3_REGION64 contents:"  >>job.log
cat $GIS3_REGION64 >>job.log
echo "$SH_VER:LO:$GIS3_REGION64 END"  >>job.log
echo "$SH_VER:CO:GIS2_REGION256 is $GIS2_REGION256" >>job.log
echo "$SH_VER:LO:$GIS2_REGION256 contents:"  >>job.log
cat $GIS2_REGION256 >>job.log
echo "$SH_VER:LO:$GIS2_REGION256 END"  >>job.log
echo "$SH_VER:CO:GIS3_REGION256 is $GIS3_REGION256" >>job.log
echo "$SH_VER:LO:$GIS3_REGION256 contents:"  >>job.log
cat $GIS3_REGION256 >>job.log
echo "$SH_VER:LO:$GIS3_REGION256 END"  >>job.log
echo "$SH_VER:CO:GIS_EVENTS_MIN is $GIS_EVENTS_MIN" >>job.log
echo "$SH_VER:CO:SIS_EVENTS_MIN is $SIS_EVENTS_MIN" >>job.log
echo "$SH_VER:CO:GIS_GAINHIST_STAGE is $GIS_GAINHIST_STAGE" >>job.log
echo "$SH_VER:CO:SIS_FLK_PIXEL_STAGE is $SIS_FLK_PIXEL_STAGE" >>job.log
echo "$SH_VER:CO:ISAS_MKF_STAGE is $ISAS_MKF_STAGE" >>job.log
echo "$SH_VER:CO:ATT_LOG_STAGE is $ATT_LOG_STAGE" >>job.log
echo "$SH_VER:CO:GIS_KEYWORDS is $GIS_KEYWORDS" >>job.log
echo "$SH_VER:CO:SIS0_KEYWORDS is $SIS0_KEYWORDS" >>job.log
echo "$SH_VER:CO:SIS1_KEYWORDS is $SIS1_KEYWORDS" >>job.log

# FTOOLS need 3 environment variables in order to correctly find *.par files
# these are defined here to look 1st in the current dir and 2nd in the 
# FTOOLS dir
export SYSPFILES=$FTOOLS
export LOCPFILES="./"
export PFILES="$LOCPFILES;$SYSPFILES"

export PATH=":$FTOOLS:/usr/ucb:/bin:/usr/bin:/usr/local/bin"