# Processing script configuration.
# Written by Ron Watkins, 13Jun94.
echo "$SH_VER:LO:Set up the processing run configuration" >> job.log

export FRFREAD="/usr/local/frfread/frfread3.00/frfreadng.3.027"
export FTOOLSBASE="/usr/local/ftools/ftools.3.1.5"
export FTOOLS="$FTOOLSBASE/bin.host"
export REFDATA="$FTOOLSBASE/refdata"
export STOOLS="/usr/local/stools/stools.2.3/bin"
export XANADU="/usr/local/xanadu"
export PPMTOGIF="/usr/local/bin/ppmtogif"
export ISASBIN="/usr/local/isas_software/bin"
export MKFILTERVER="mkfilter2.11"
export GAINHISTVER="temp2gain_v3.6"
export GAINHISTCAL="/aps/calibration/gis_temp2gain.fits"
export S0MAP="/aps/calibration/s0_teldef_ascalin.fits"
export S1MAP="/aps/calibration/s1_teldef_ascalin.fits"
export G2ONPOWMAP="/aps/calibration/gis2_ano_on_pow2.fits"
export G2ONFLFMAP="/aps/calibration/gis2_ano_on_flf.fits"
export G3ONPOWMAP="/aps/calibration/gis3_ano_on_pow2.fits"
export G3ONFLFMAP="/aps/calibration/gis3_phnew_tbl_flf.fits"
export G2OFFPOWMAP="/aps/calibration/gis2_ano_off_pow2.fits"
export G2OFFFLFMAP="/aps/calibration/gis2_ano_off_flf.fits"
export G3OFFPOWMAP="/aps/calibration/gis3_ano_off_pow2.fits"
export G3OFFFLFMAP="/aps/calibration/gis3_ano_off_flf.fits"
export RIGID="/aps/calibration/rigidity.data.1.23"
export LEAPTABLE="/aps/calibration/leapsec.dat.1.24"
export GIS2_REGION256="/aps/config/GIS2_REGION256.1.0"
export GIS3_REGION256="/aps/config/GIS3_REGION256.1.0"
export GIS2_REGION64="/aps/config/GIS2_REGION64.1.0"
export GIS3_REGION64="/aps/config/GIS3_REGION64.1.0"
export GIS3BFCAL="gis3_phnew_tbl_flf_200494.fits"
export SISPICAL="sisph2pi.fits"
export GIS_EVENTS_MIN="1000"
export SIS_EVENTS_MIN="10000"
export GIS_GAINHIST_STAGE="/data/trend/rev1/gis_temp2gain"
export SIS_FLK_PIXEL_STAGE="/data/trend/rev1/sis_flk_pixel"
export ISAS_MKF_STAGE="/data/trend/rev1/isas_mkf"
export ATT_LOG_STAGE="/data/trend/rev1/attitude_runs"
export GIS_KEYWORDS="/aps/config/ffilecat.gis.keywords.rev1"
export SIS0_KEYWORDS="/aps/config/ffilecat.sis0.keywords.rev1"
export SIS1_KEYWORDS="/aps/config/ffilecat.sis1.keywords.rev1"
export MODAL_LIST="/aps/config/modal_config"
export MODAL_LIST_STAGE="/data/trend/rev1/modal_config"
export GIF_STAGE="/data/trend/$TYPE/gif"
export ASCA_STAGE="/data/trend/rev1/ASCA.txt"
export PROC_HIST="/aps/$TYPE/automation/$TYPE.proc.history"
export DISPLAY="128.183.119.23:0"
export USERNAME="procinfo@ssvs.gsfc.nasa.gov"
export SSTIMES="/aps/sequence_science_times"

echo "$SH_VER:CO:FRFREAD is $FRFREAD" >> job.log
echo "$SH_VER:CO:FTOOLS are $FTOOLSBASE" >> job.log
echo "$SH_VER:CO:STOOLS are $STOOLS" >> job.log
echo "$SH_VER:CO:XANADU is $XANADU" >> job.log
echo "$SH_VER:CO:ISASBIN is $ISASBIN" >> job.log
echo "$SH_VER:CO:PPMTOGIF is $PPMTOGIF" >> job.log
echo "$SH_VER:CO:RIGID is $RIGID" >> job.log
echo "$SH_VER:CO:LEAPTABLE is $LEAPTABLE" >> job.log
echo "$SH_VER:CO:ISAS MKFILTERVER is $MKFILTERVER" >> job.log
echo "$SH_VER:CO:ISAS GAINHISTVER is $GAINHISTVER" >> job.log
echo "$SH_VER:CO:ISAS GAINHISTCAL is $GAINHISTCAL" >> job.log
echo "$SH_VER:CO:GIS3BFCAL is $GIS3BFCAL" >> job.log
echo "$SH_VER:CO:SISPICAL is $SISPICAL" >> job.log
echo "$SH_VER:CO:S0MAP is $S0MAP" >> job.log
echo "$SH_VER:CO:S1MAP is $S1MAP" >> job.log
echo "$SH_VER:CO:G2ONPOWMAP is $G2ONPOWMAP" >> job.log
echo "$SH_VER:CO:G2OFFPOWMAP is $G2OFFPOWMAP" >> job.log
echo "$SH_VER:CO:G2ONFLFMAP is $G2ONFLFMAP" >> job.log
echo "$SH_VER:CO:G2OFFFLFMAP is $G2OFFFLFMAP" >> job.log
echo "$SH_VER:CO:G3ONPOWMAP is $G3ONPOWMAP" >> job.log
echo "$SH_VER:CO:G3OFFPOWMAP is $G3OFFPOWMAP" >> job.log
echo "$SH_VER:CO:G3ONFLFMAP is $G3ONFLFMAP" >> job.log
echo "$SH_VER:CO:G3OFFFLFMAP is $G3OFFFLFMAP" >> job.log
echo "$SH_VER:CO:GIS2_REGION64 is $GIS2_REGION64" >> job.log
echo "$SH_VER:LO:$GIS2_REGION64 contents:" >> job.log
cat $GIS2_REGION64 >> job.log
echo "$SH_VER:LO:$GIS2_REGION64 END" >> job.log
echo "$SH_VER:CO:GIS3_REGION64 is $GIS3_REGION64" >> job.log
echo "$SH_VER:LO:$GIS3_REGION64 contents:" >> job.log
cat $GIS3_REGION64 >> job.log
echo "$SH_VER:LO:$GIS3_REGION64 END" >> job.log
echo "$SH_VER:CO:GIS2_REGION256 is $GIS2_REGION256" >> job.log
echo "$SH_VER:LO:$GIS2_REGION256 contents:" >> job.log
cat $GIS2_REGION256 >> job.log
echo "$SH_VER:LO:$GIS2_REGION256 END" >> job.log
echo "$SH_VER:CO:GIS3_REGION256 is $GIS3_REGION256" >> job.log
echo "$SH_VER:LO:$GIS3_REGION256 contents:" >> job.log
cat $GIS3_REGION256 >> job.log
echo "$SH_VER:LO:$GIS3_REGION256 END" >> job.log
echo "$SH_VER:CO:GIS_EVENTS_MIN is $GIS_EVENTS_MIN" >> job.log
echo "$SH_VER:CO:SIS_EVENTS_MIN is $SIS_EVENTS_MIN" >> job.log
echo "$SH_VER:CO:GIS_GAINHIST_STAGE is $GIS_GAINHIST_STAGE" >> job.log
echo "$SH_VER:CO:SIS_FLK_PIXEL_STAGE is $SIS_FLK_PIXEL_STAGE" >> job.log
echo "$SH_VER:CO:ISAS_MKF_STAGE is $ISAS_MKF_STAGE" >> job.log
echo "$SH_VER:CO:ATT_LOG_STAGE is $ATT_LOG_STAGE" >> job.log
echo "$SH_VER:CO:GIF_STAGE is $GIF_STAGE" >> job.log
echo "$SH_VER:CO:ASCA_STAGE is $ASCA_STAGE" >> job.log
echo "$SH_VER:CO:GIS_KEYWORDS is $GIS_KEYWORDS" >> job.log
echo "$SH_VER:CO:SIS0_KEYWORDS is $SIS0_KEYWORDS" >> job.log
echo "$SH_VER:CO:SIS1_KEYWORDS is $SIS1_KEYWORDS" >> job.log
echo "$SH_VER:CO:MODAL_LIST is $MODAL_LIST" >> job.log
echo "$SH_VER:CO:PROC_HIST is $PROC_HIST" >> job.log
echo "$SH_VER:CO:SSTIMES is $SSTIMES" >> job.log

# FTOOLS need 3 environment variables in order to correctly find *.par files
# these are defined here to look 1st in the current dir and 2nd in the 
# FTOOLS dir
export SYSPFILES="$FTOOLS"
export LOCPFILES="./"
export PFILES="$LOCPFILES;$SYSPFILES"
#export PFCLOBBER=1
unset PFCLOBBER

export PATH=":$FTOOLS:/usr/ucb:/bin:/usr/bin:/usr/local/bin"