# Processing script configuration.
# Written by Ron Watkins, 13Jun94.
#
# maintained by D. Jennings as of 03/01/95
#

echo "$SH_VER:LO:Set up the processing run configuration" >> job.log

export FRFREAD="/usr/local/frfread/frfread3.00/frfreadng.3.027"
export FTOOLSBASE="/usr/local/ftools/ftools.3.3.1"
export FTOOLS="$FTOOLSBASE/bin.host"
export REFDATA="/aps/calibration"
export STOOLS="/usr/local/stools/stools.2.6/bin"
export XANADU="/usr/local/xanadu"
export PPMTOGIF="/usr/local/bin/ppmtogif"
export ISASBIN="/usr/local/isas_software/bin"
export MKFILTERVER="mkfilter2.2"
export GAINHISTVER="temp2gain_v3.6"
export GAINHISTCAL="/aps/calibration/gis_temp2gain.fits"
export S0MAP="/aps/calibration/s0_teldef_ascalin.fits"
export S1MAP="/aps/calibration/s1_teldef_ascalin.fits"
export G2ONPOWMAP="/aps/calibration/gis2_ano_on_pow2.fits"
export G2ONFLFMAP="/aps/calibration/gis2_ano_on_flf_180295.fits"
export G3ONFLFMAP="/aps/calibration/gis3_ano_on_flf_180295.fits"
export G3ONPOWMAP="/aps/calibration/gis3_ano_on_pow2.fits"
export G2OFFPOWMAP="/aps/calibration/gis2_ano_off_pow2.fits"
export G2OFFFLFMAP="/aps/calibration/gis2_ano_off_flf.fits"
export G3OFFPOWMAP="/aps/calibration/gis3_ano_off_pow2.fits"
export G3OFFFLFMAP="/aps/calibration/gis3_ano_off_flf.fits"
export RIGID="/aps/calibration/rigidity.data.1.23"
export LEAPTABLE="/aps/calibration/leapsec.fits"
export GIS2_REGION256="/aps/config/GIS2_REGION256.1.0"
export GIS3_REGION256="/aps/config/GIS3_REGION256.1.0"
export GIS2_REGION64="/aps/config/GIS2_REGION64.1.0"
export GIS3_REGION64="/aps/config/GIS3_REGION64.1.0"
export GIS3BFCAL_FLF="gis3_phnew_tbl_flf_200494.fits"
export GIS3BFCAL_POW2="gis3_ano_on_pow2_200494.fits"
export SISPICAL="sisph2pi.fits"
export GIS_EVENTS_MIN="1000"
export SIS_EVENTS_MIN="10000"
export GIS_GAINHIST_STAGE="/data/trend/rev1/gis_temp2gain"
export SIS_FLK_PIXEL_STAGE="/data/trend/rev1/sis_flk_pixel"
export ISAS_MKF_STAGE="/data/trend/rev1/isas_mkf"
export ATT_LOG_STAGE="/data/trend/rev1/attitude_runs"
export SIS_RATE_STAGE="/data/trend/rev1/sis_rate"
export GIS_KEYWORDS="/aps/config/ffilecat.gis.keywords.rev1"
export SIS0_KEYWORDS="/aps/config/ffilecat.sis0.keywords.rev1"
export SIS1_KEYWORDS="/aps/config/ffilecat.sis1.keywords.rev1"
export MODAL_LIST="/aps/config/modal_config"
export MODAL_LIST_STAGE="/data/trend/rev1/modal_config"
export GIF_STAGE="/data/trend/$TYPE/gif"
export ASCA_STAGE="/data/trend/rev1/ASCA.txt"
export PROC_HIST="/aps/$TYPE/automation/$TYPE.proc.history"
export DISPLAY="128.183.119.43:0"
export USERNAME="procinfo@ssvs.gsfc.nasa.gov"
export SSTIMES="/aps/sequence_science_times"
export WWW_DIR="/data/trend/www/proclogs"
export DFE_DIR="/data/trend/rev1/dfe"
export LOG_DIR="/data/trend/rev1/joblogs"
export OBJ_DIST_STAGE="/data/trend/rev1/objdist"
export MAX_SEPARATION=".016667"

echo "$SH_VER:CO:FRFREAD             is $FRFREAD" >> job.log
echo "$SH_VER:CO:FTOOLS              is $FTOOLSBASE" >> job.log
echo "$SH_VER:CO:STOOLS              is $STOOLS" >> job.log
echo "$SH_VER:CO:XANADU              is $XANADU" >> job.log
echo "$SH_VER:CO:ISASBIN             is $ISASBIN" >> job.log
echo "$SH_VER:CO:PPMTOGIF            is $PPMTOGIF" >> job.log
echo "$SH_VER:CO:RIGID               is $RIGID" >> job.log
echo "$SH_VER:CO:LEAPTABLE           is $LEAPTABLE" >> job.log
echo "$SH_VER:CO:ISAS MKFILTERVER    is $MKFILTERVER" >> job.log
echo "$SH_VER:CO:ISAS GAINHISTVER    is $GAINHISTVER" >> job.log
echo "$SH_VER:CO:ISAS GAINHISTCAL    is $GAINHISTCAL" >> job.log
echo "$SH_VER:CO:GIS3BFCAL_FLF       is $GIS3BFCAL_FLF" >> job.log
echo "$SH_VER:CO:GIS3BFCAL_POW2      is $GIS3BFCAL_POW2" >> job.log
echo "$SH_VER:CO:SISPICAL            is $SISPICAL" >> job.log
echo "$SH_VER:CO:S0MAP               is $S0MAP" >> job.log
echo "$SH_VER:CO:S1MAP               is $S1MAP" >> job.log
echo "$SH_VER:CO:G2ONPOWMAP          is $G2ONPOWMAP" >> job.log
echo "$SH_VER:CO:G2OFFPOWMAP         is $G2OFFPOWMAP" >> job.log
echo "$SH_VER:CO:G2ONFLFMAP          is $G2ONFLFMAP" >> job.log
echo "$SH_VER:CO:G2OFFFLFMAP         is $G2OFFFLFMAP" >> job.log
echo "$SH_VER:CO:G3ONPOWMAP          is $G3ONPOWMAP" >> job.log
echo "$SH_VER:CO:G3OFFPOWMAP         is $G3OFFPOWMAP" >> job.log
echo "$SH_VER:CO:G3ONFLFMAP          is $G3ONFLFMAP" >> job.log
echo "$SH_VER:CO:G3OFFFLFMAP         is $G3OFFFLFMAP" >> job.log
echo "$SH_VER:CO:GIS2_REGION64       is $GIS2_REGION64" >> job.log
echo "$SH_VER:LO:$GIS2_REGION64 contents:" >> job.log
cat $GIS2_REGION64 >> job.log
echo "$SH_VER:LO:$GIS2_REGION64 END" >> job.log
echo "$SH_VER:CO:GIS3_REGION64       is $GIS3_REGION64" >> job.log
echo "$SH_VER:LO:$GIS3_REGION64 contents:" >> job.log
cat $GIS3_REGION64 >> job.log
echo "$SH_VER:LO:$GIS3_REGION64 END" >> job.log
echo "$SH_VER:CO:GIS2_REGION256      is $GIS2_REGION256" >> job.log
echo "$SH_VER:LO:$GIS2_REGION256 contents:" >> job.log
cat $GIS2_REGION256 >> job.log
echo "$SH_VER:LO:$GIS2_REGION256 END" >> job.log
echo "$SH_VER:CO:GIS3_REGION256      is $GIS3_REGION256" >> job.log
echo "$SH_VER:LO:$GIS3_REGION256 contents:" >> job.log
cat $GIS3_REGION256 >> job.log
echo "$SH_VER:LO:$GIS3_REGION256 END" >> job.log
echo "$SH_VER:CO:GIS_EVENTS_MIN      is $GIS_EVENTS_MIN" >> job.log
echo "$SH_VER:CO:SIS_EVENTS_MIN      is $SIS_EVENTS_MIN" >> job.log
echo "$SH_VER:CO:GIS_GAINHIST_STAGE  is $GIS_GAINHIST_STAGE" >> job.log
echo "$SH_VER:CO:SIS_FLK_PIXEL_STAGE is $SIS_FLK_PIXEL_STAGE" >> job.log
echo "$SH_VER:CO:ISAS_MKF_STAGE      is $ISAS_MKF_STAGE" >> job.log
echo "$SH_VER:CO:ATT_LOG_STAGE       is $ATT_LOG_STAGE" >> job.log
echo "$SH_VER:CO:GIF_STAGE           is $GIF_STAGE" >> job.log
echo "$SH_VER:CO:ASCA_STAGE          is $ASCA_STAGE" >> job.log
echo "$SH_VER:CO:GIS_KEYWORDS        is $GIS_KEYWORDS" >> job.log
echo "$SH_VER:CO:SIS0_KEYWORDS       is $SIS0_KEYWORDS" >> job.log
echo "$SH_VER:CO:SIS1_KEYWORDS       is $SIS1_KEYWORDS" >> job.log
echo "$SH_VER:CO:MODAL_LIST          is $MODAL_LIST" >> job.log
echo "$SH_VER:CO:PROC_HIST           is $PROC_HIST" >> job.log
echo "$SH_VER:CO:SSTIMES             is $SSTIMES" >> job.log
echo "$SH_VER:CO:WWW_DIR             is $WWW_DIR" >> job.log
echo "$SH_VER:CO:DFE_DIR             is $DFE_DIR" >> job.log
echo "$SH_VER:CO:LOG_DIR             is $LOG_DIR" >> job.log
echo "$SH_VER:CO:MAX_SEPARATION      is $MAX_SEPARATION" >> job.log
echo "$SH_VER:CO:OBJ_DIST_STAGE      is $OBJ_DIST_STAGE" >> job.log

# FTOOLS need 3 environment variables in order to correctly find *.par files
# these are defined here to look 1st in the current dir and 2nd in the 
# FTOOLS dir
export SYSPFILES="$FTOOLS"
export LOCPFILES="./"
export PFILES="$LOCPFILES;$SYSPFILES"
#export PFCLOBBER=1
unset PFCLOBBER

export PATH=":$FTOOLS:/usr/ucb:/bin:/usr/bin:/usr/local/bin"