ASCAEFFMAP (Dec) 96 ASCAEFFMAP (Dec) NAME ASCAEFFMAP -- Generates an ASCA detector efficiency map in detector coordinates. USAGE ascaeffmap [ ] DESCRIPTION ASCAEFFMAP generates an ASCA detector efficiency map in detector coordinates for the energy band specified by and of the input spectral file. The input spectral file is used as the weights to calculate the energy averaged efficiency map. The weights used for the calculation, as well as the input spectrum, is written in the first extension of the output file. The output efficiency map may be used to correct vignetting, GIS grid structure, GIS efficiency non-uniformity, and gaps between SIS chips. The output efficiency map can be also used as an input of the ftool 'ascaexpo' (to specify as the 'instfile' parameter), to make exposure maps with vignetting and instrumental efficiency corrections. PARAMETERS phafile [string] Name of the input spectral file. chip [string] CCD chip ID string (SIS only). The chips selected. pha_lo [real] The lower boundary of the pulse-height channels to use. The channel number refers to the channel after grouping. pha_hi [real] The upper boundary of the pulse-height channels to use. The channel number refers to the channel after grouping. outfile [string] Output file name. (rmffile [string]) Name of the input RMF file. If 'CALDB', the calibration database is searched for an appropriate file. The default is 'CALDB'. (wmapfile [string]) The name of the input WMAP file. If 'default', WMAP is taken from the input spectral file. (teldef [string]) The name of the telescope definition file to get chip image (SIS only). If 'CALDB', the calibration database is searched for an appropriate file. If 'AUTO', the calibration database is searched if present otherwise the appropriate file in the ftools refdata directory is used. The default is 'AUTO'. (clobber [bool]) If clobber=yes, the output file overwrites any existing file of the same name. The default is yes. (xrteff [bool]) If xrteff=yes, multiply by the XRT effective area. The default is yes. (gispsf [bool]) If gispsf=yes, convolve with the GIS point spread function. The default is yes. (bethick [string]) The filename for the GIS Be thickness detector map. If 'CALDB', the calibration database is searched for an appropriate file. If 'AUTO', the calibration database is searched if present otherwise the appropriate file in the ftools refdata directory is used. The default is 'AUTO'. (grid [string]) The filename for the GIS grid detector map. If 'CALDB', the calibration database is searched for an appropriate file. If 'AUTO', the calibration database is searched if present otherwise the appropriate file in the ftools refdata directory is used. The default is 'AUTO'. (xrtrsp [string]) The path to the XRT effective area file. If 'CALDB', the calibration database is searched for an appropriate file. If 'AUTO', the calibration database is searched if present otherwise the appropriate file in the ftools refdata directory is used. The default is 'AUTO'. EXAMPLES 1) Produce an efficiency map file 'eff.fits' from the spectral file 'gis2pha.fits' for chips 0 and 1 for the spectral channels 10-20. The response matrix is found from the calibration database. ca> ascaeffmap gis2pha.fits 01 10 20 eff.fits CALDB NOTE The output efficiency map is made in detector coordinate. To make an exposure map in the sky coordinate, 'ascaexpo' should be used. BUGS Since ascaeffmap calculates the efficiency map for each grouped spectral bin between the lower and upper boundaries, it can take an extremely long time to finish when the entire energy band is specified. It is recommended that a narrow spectral band be specified or the spectral bins be coarsely grouped. SEE ALSO ascaexpo .endhelp