NAME
mxgscandat
USAGE
mxgscandat scanflist outfname pibandfname evtflist bevtflist srcregfile bgdregfile bgdscale mjd_start mjd_end phindx nh src_dcolphi_max src_dcoltha_max bgd_dcoltha_min bgd_dcoltha_max evt_colphi_max dlpath effcalc gtifile0 gtifile1 gtifile2 gtifile3 gtifile4 gtifile5 gtifile6 gtifile7 gtifile8 gtifile9 gtifile10 gtifile11
DESCRIPTION
This tool determines the scan history of a source for each GSC detector that views the source.
PARAMETERS
- scanflist [filename]
-
This file (or list of files) tells time-history of the source position relative to each camera. It is the output
file from the tool mxscancur. List files are given as "@scan_list.txt", where scan_list.txt is an ascii file in which
each row contains the name of a file.
- outfname [filename]
-
Output filename for mxgscandat. This file contains the scan history of the source by each GSC detector exposed to the source.
- pibandfname [filename]
-
Ascii file which which contains the lower and upper channel of each PI band. The default contents of this
file are as follows:
40 119
120 239
- evtflist [filename]
-
Name of source event file, or the name of a file containing a list of names of source event files. Text list files are given as "@event_list.txt", where event_list.txt is an ascii file in which each row contains the name of an event file.
- bevtflist [filename]
-
Name of background event file, or the name of a file containing a list of names of background event files. Text list files are given as "@event_list.txt", where event_list.txt is an ascii file in which each row contains the name of an event file.
- srcregfile=NONE [filename]
-
Source region file name. This is an optional parameter that is used to determine the value of bgdscale if it is not provided.
- bgdregfile=NONE [filename]
-
Background region file name. This is an optional parameter that is used to determine the value of bgdscale if it is not provided.
- bgdscale [double]
-
Background region / source region scale factor. -1.0 is specified for a LC type background.
- mjd_start [double]
-
Start time of observation in MJD.
- mjd_stop [double]
-
Stop time of observation in MJD.
- phindx [double]
-
This is the spectral index of the events assuming a powerlaw spectrum.
- nh [double]
-
This is the hydrogen column density (10^22 cm^-2) in the direction of the observation.
- src_dcolphi_max [double]
-
Maximum allowed difference in phi between event position and source region (degree)
- src_dcoltha_max [double]
-
Maximum allowed difference in theta between event position and source region (degree)
- bgd_dcoltha_min [double]
-
Minimum allowed difference in theta between event position and background region (degree)
- bgd_dcoltha_max [double]
-
Maximum allowed difference in theta between event position and background region (degree)
- evt_colphi_max [double]
-
Maximum allowed value of phi for an event (degree)
- dlpath [boolean]
-
Data downlink path (0: Low, 1: Med)
- effcalc [boolean]
-
Determine the transmission efficiency correction for the data? (0: No, 1: Yes)
- gtifile0 [filename]
-
Name of the camera 0 GTI fits file.
- gtifile1 [filename]
-
Name of the camera 1 GTI fits file.
- gtifile2 [filename]
-
Name of the camera 2 GTI fits file.
- gtifile3 [filename]
-
Name of the camera 3 GTI fits file.
- gtifile4 [filename]
-
Name of the camera 4 GTI fits file.
- gtifile5 [filename]
-
Name of the camera 5 GTI fits file.
- gtifile6 [filename]
-
Name of the camera 6 GTI fits file.
- gtifile7 [filename]
-
Name of the camera 7 GTI fits file.
- gtifile8 [filename]
-
Name of the camera 8 GTI fits file.
- gtifile9 [filename]
-
Name of the camera 9 GTI fits file.
- gtifile10 [filename]
-
Name of the camera A GTI fits file.
- gtifile11 [filename]
-
Name of the camera B GTI fits file.
- (leapsecfile = CALDB [filename])
-
Name of the leapsecond calibration file. Used to apply leapsecond correction to mission time.
- (ldparm = CALDB [filename])
-
List of LD parameter correction tables.
- (hvbithist = CALDB [filename])
-
List of HVBIT history files (or CALDB)
- (mfptabbe = CALDB [filename])
-
Table which contains the mean free path through beryllium at different energies.
- (mfptabxe = CALDB [filename])
-
Table which contains the mean free path through xeon at different energies.
- (ssdockinfo = CALDB [filename])
-
Table which contains the space shuttle docking dates.
- (clobber = no) [boolean]
- Overwrites the existing output file if set to yes (yes/[no]).
- (chatter = 1) [integer]
- Chatter level for output. Set to 0 to suppress output,
or to 1, 2, or 3 for increasing the chatter of the output.
- (history = yes) [boolean]
- Records tool parameters in HISTORY ([yes]/no).
- (mode = ql) [string ql|hl|q]
- Mode to query the parameter file.
Acceptable values include: "ql (query and learn/remember), "hl" (hidden and learn/remember), "q" (query but don't remember), "h" (hidden).(Optional)
EXAMPLES
description
example
SEE ALSO
LAST MODIFIED