Search in
Xamin
 or Browse...

CMASCREEN - EXOSAT/CMA Sources (Screened for Quality)

HEASARC
Archive

Overview

This database table contains the results of the sources detected from the two EXOSAT LE telescopes. Each telescope had a channel multiplier array, CMA, detector in the focal plane. The CMA/telescope combination covered the 0.05-2.0 keV energy range with a field of view of 2 degrees and an on-axis angular resolution of 20 arcseconds (HEW). The detectors had no intrinsic spectral capabilities; however, different filters were used to make broad band measurements. The most commonly used were thin Lexan (no. 7), Aluminum-Parylene (no. 6) and Boron (no. 8).

An image was generated for each observation using a particular filter. A detection program was used to generate one database entry per source detected above a particular threshold. This catalog contains the list of detected sources, details about those detections, plus the names of the files containing the associated image and lightcurves. Since many objects were observed many times, there are multiple entries per object.

The list of detections in this database table has been screened for quality. Only sources with qflag_le >= 3 are present. Please refer to the CMA database table for the complete, unscreened list of detections.


References

De Korte P.A.J. et al., 1981, Sp. Sci. Rev., Vol. 30, p. 495.

White N.E. and Peacock A.P. 1988, in X-ray Astronomy with
  EXOSAT, [eds. N.E. White and R. Pallivicini], Memoria S. A. It, p. 59.

Provenance

This database table was created by the HEASARC in August 2020, and it is based on a table created by the HEASARC in 1995 or earlier. The original CMA database table was created at the EXOSAT observatory during the post-operation phase (1986-1990) as part of the pipeline processing. These CMA results are part of the HEASARC data holdings from the start of the HEASARC.

Data Products

Images and lightcurves are available for this database. The data products were created during the post-operational phase at the EXOSAT Observatory using a standard, automatic analysis of the data.

UV Leak

The CMA detectors were sensitive not only to X-rays, but also to ultraviolet photons, which could cause unwanted contamination when observing O or B stars. The different filters could be used to reduce, estimate, and eliminate UV contamination. The program 'leuv' is used to predict the UV contamination from a star for a given filter. Only the Boron filter is completely free of UV contamination, although the aluminum parylene was relatively immune (except for the very brightest and earliest stars).

Quality

The LE auto-produced high-quality results in the vast majority of cases. In some instances, however, problems were encountered. Most of the resulting inaccuracies or errors have been removed during a systematic program of quality checking. Although great care has been taken with this quality checking, the monotonous nature of the work means that a few bad entries may be lurking in the database.

The most frequent problems experienced are:

* Extended sources: Many extended sources will not have been detected and the count rates of those that are detected can be severely underestimated. This is due to the fact that the program used to detect sources was optimized for point-like sources. Users interested in studying extended sources should extract the relevant images (which are available online) and perform a more detailed analysis.

* Confused sources: In a few cases sources were detected near a bright object. In these cases it is possible that the lightcurve of the fainter source is contaminated by photons from the brightest object. One such example is the quasar EXO1102.7+2523 which lies only 2.5 arc min from the bright AM Her-type object CW 1103+254.

* Boron filter: A special Boron PSF was used to estimate the count rate of sources detected in this filter configuration. However, since the Boron PSF is a function of the source's spectral shape, it is impossible to apply the most appropriate PSF in an automatic process. This limitation leads to a possible underestimation of the count rate which can be as large as a factor of two for unabsorbed sources with very steep soft X-ray spectra.

* Spurious sources: There are two kinds of spurious sources - those due to statistical fluctuation of the background and those due to the inability of the software to cope with unusual situations. In the latter case these are removed from the database as soon as they are recognized as such. These sources are found near bright objects in very short exposures (<1000 seconds), in images where a diamond filter was used, or when a bright, extended source is present in the field of view (e.g., Cas A). The detection threshold of a source is a complicated function of exposure time, image background and position in the field of view. This threshold is set so that at most one spurious detection is expected in every 5 images. More than 3000 images were analyzed and about 600 spurious sources are expected to be present in the LE database across the full field of view. The vast majority of these will be outside the central 15 arc min radius of the detector. The reality of a source can be determined on the basis of additional information such as significance of detection, exposure time, background level, distance from the center, etc.


Sensitivity

The average source detection threshold for a typical 10,000-second exposure within the central 12 arc minute radius region of the detector, using the 3000 lexan filter, is 0.002 ct/s. For a power law spectrum with an energy index of 1.0 and an interstellar column density typical when viewing a high galactic latitude, an extragalactic source of 4 x 1020 H cm-2 gives a flux of about 7 x 10-13 erg c-2 s-1. If the exposure time is increased by an order of magnitude (a typical maximum observation time) the detection threshold decreases by a factor of about 3.

Count Rate to Flux

To convert LE count rates to fluxes, do the following:
 * go to https://heasarc.gsfc.nasa.gov/FTP/caldb/data/exosat/cma/cpf/,
 * download the `.rmf` file for the filter instrument combination you need,
 * start XSPEC, then:

 model wabs po        (or whatever your model is)
 fakeit none
 10000                (or whatever your exposure is)
 flux 0.1 2.5
The `fakeit` and `flux` commands will give the flux and count rate for the model you have specified.

Parameters

Entry_Number
This parameter contains a HEASARC-created unique sequential identification number for each entry in the original CMA database table.

Name
The name of the EXOSAT target/field. There are many serendipitous sources in the EXOSAT LE images, and, in some cases, the name given here will reflect the original target name and not the actual source name.

RA
The Right Ascension of the detected source.

Dec
The Declination of the detected source.

LII
The Galactic Longitude of the detected source.

BII
The Galactic Latitude of the detected source

Al_Count_Rate
Counting rate from the Al/P filter, if available from an observation of the same source made within one day. `AL count rate error` gives the error on the Al/P counting rate.

Al_Count_Rate_Error
Al/Par Count Rate Error

Background_Per_Sqpix
Background Level

Bo_Count_Rate
Counting rate from the boron filter, if available (see the `AL count rate` description). `BO count rate error` gives the error on boron counting rate.

Bo_Count_Rate_Error
Boron Count Rate Error

BV_Color
B-V Color

Class
Browse Object Classification

Count_Rate
The `count rate` and `count rate error` are the average counting rate (counts per sec) over the observation and its associated one sigma uncertainty.

Count_Rate_Error
Error on Count Rate

Deadtime_Correction_Fact
Detector Deadtime Correction Factor

Detection_Significance
The probability of the detection being due to random chance. Note, this is not scaled for the independent number of search attempts in an image.

Diamond_Filter
Some observation were carried out with an OBC program that sets a 'diamond' filter. This filter electronically screened out the outer part of the field of view. The resulting image, which is shaped as a diamond, covers only a fraction of the 2 X 2 deg. If the diamond filter was used, then the DIAMOND_FILTER parameter is set to 1. Otherwise, its value is 0.

Error_Radius
The 90-percent confidence uncertainty in arcseconds for the LE1 telescope.

Expected_Variance_TA1
Expected Variance in TA1

Expected_Variance_TA2
Expected Variance in TA2

Exposure_Time
The exposure is the total on-source observation time in seconds. This includes all dead time effects, interruptions in coverage, etc.

File_Bglcurve
File name of the background lightcurve.

File_Image
The file_image parameter contains the file name of the associated image.

File_Lcurve
File name of the source lightcurve.

Filter
The filter numbers are

   * 7 = 3000 (thin) lexan

   * 6 = al/p

   * 8 = boron

   * 2 = PPL

   * 3 = 4000 (thick) lexan

ID_Number
Source Order Number

Instrument
The instrument parameter records which of the two telescope+detector combination, LE1+CMA1 or LE2+CMA2, were used in the observation to detect the source. The values are L1, for the combination LE1+CMA1, and L2, for the combination LE2+CMA2.

IPC_Count_Rate
IPC Count Rate

IPC_Count_Rate_Error
IPC Count Rate Error

IRAS_Flux_1
12-micron IRAS Flux

IRAS_Flux_2
25-micron IRAS Flux

IRAS_Flux_3
60-micron IRAS Flux

IRAS_Flux_4
100-micron IRAS Flux

Last_Update
Date of Last Record Update

Lightcurve_Prefix
Rates Buffer Identifier (First Letter)

ME_1_To_3_Count_Rate
ME Count Rate in 1-3keV Band

ME_1_To_3_Count_Rate_Err
ME Count Rate Error in 1-3keV Band

ME_3_To_6_Count_Rate
ME Count Rate in 3-6 keV Band

ME_3_To_6_Count_Rate_Err
ME Count Rate Error in 3-6 keV Band

ME_Count_Rate
Counting rate from the ME detector during this observation (warning: this may not cover exactly the same time interval), it also covers the central field of view and so will include all sources seen by the LE. `ME count rate error` gives the error on the count rate.

ME_Count_Rate_Error
ME Count Rate Error

NH_21cm
This parameter contains the 21-cm NH through the galaxy H cm-2 from Starke et al.

Observed_Variance_TA1
Observed Variance in TA1

Observed_Variance_TA2
Observed Variance in TA2

Offset
Angular Distance (in arcmin) from xpix=15, ypix=15

Old_Deadtime
Dead Time Correction

Old_NH_21cm
NH (1019 cm-2) in the Galaxy

PI_Code
Principal Investigator Code

Point_Source_Flag
Point Source Flag

Processed_Date
Date of Buffer Creation

Proposal_Type
Proposal Type (HLX etc.)

Qflag_LE
This parameter contains the quality flag for the LE. This is a number between 0 and 5, where 5 is excellent and 0 means there may be a serious problem with the entry. A value of 3 means that the entry should be checked. For example, all boron filter entries have a qflag of 3, to warn of the problem with the PSF for soft sources observed with this filter.

Qflag_ME
ME Quality Flag

Quality_Check
Visual Quality of Detection

Radio_5GHz_Flux
Radio Flux (mJy) at 5 GHz

Radio_Flag
Flag Indicates Radio Emission

Redshift
Redshift or HD Number of Counterpart

Res_of_LC
This parameter contains the time resolution of the associated data product lightcurve in seconds. The time resolution was 2n seconds, where n was optimized such that the average number of counts per bin is 0.3.

ROSAT_ID
ROSAT ID

Sequence_Number
Sequence Number

Serendipity_Flag
Flag for Serendipitous Sources

Tape_No
Archive Tape Number Where Files Are Stored

Time
The time of the observation refers to the start time. Times are accurate to the nearest second.

UB_Color
U-B Color

Vmag
V Magnitude

X_Pixels
For imaging instruments, the X pixels coordinate of the source in the detector is given by the parameter `X pixels`. The X value ranges between -1024 and 1023.

Y_Pixels
For imaging instruments, the Y pixels coordinate of the source in the detector is given by the parameter `Y pixels`. The Y value ranges between -1024 and 1023.


Contact Person

Questions regarding the CMASCREEN database table can be addressed to the HEASARC Help Desk.
Page Author: Browse Software Development Team
Last Modified: Monday, 16-Sep-2024 17:26:09 EDT