For Educators
13. Bend High Gain Antenna A (the one attached to the Side Panel 2) up through 45 degrees at the black line through its middle. Cut out purple Squares 1 and 2. Fold each of them along the middle black line. Tape the edges so you get a square with purple pattern on both sides of it. Tape one square to each antenna. Make sure the edges of the squares and the edges of the body of the model are parallel.
14. Cut out both solar panels. Fold both in half along the middle black line. Leaving the side with the small tabs open, tape the ends of three of the sides together.
15. Take the wooden pencil and insert one end into the open end (the side with the tabs) of one solar panel. Staple the middle of the solar panel to the pencil. Poke the free end of the pencil through the holes that were cut out in Step 2. Staple the other solar panel to the other end of the pencil, being careful to keep the solar panels aligned in the same direction.
 |
| Page 2 of the Color Model |
| Page 2 of the Black & White Model |
